ملخص المحتوى في الصفحة رقم 1
Universal Remote Control
Cat. No. HCCUR
Owners Manual
DI-000-HCCUR-00A
DI-000-HCCUR-00A 1 7/5/02, 2:18 PM
ملخص المحتوى في الصفحة رقم 2
READ THIS FIRST! SAFETY CONSIDERATIONS Remember to exercise good common sense when using the Home Automation features of your Remote - especially when scheduling unattended devices. There can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on. If that should happen, your coffee pot could be damaged from overheating. If an electric heater is turned on by remote control while clothing is draped over it, a fire could result. DO NOT USE
ملخص المحتوى في الصفحة رقم 3
FCC CAUTION THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturers instructions, it may cause interference to radio and televisi
ملخص المحتوى في الصفحة رقم 4
CONTENTS INTRODUCTION.................................................................. 5 GETTING STARTED .............................................................. 6 6-IN-1 REMOTE .............................................................. 6 SETTING UP YOUR REMOTE................................................... 6 BUTTON DESCRIPTIONS ..................................................... 6 SETTING UP FOR TV, VCR, CABLE BOX AND SATELLITE RECEIVER .................................. 8 USIN
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION Congratulations on your purchase of a Leviton Universal Remote Control. Make your lights and appliances go to work for you.... The Remote will control most or all of your video and audio equipment. But what really sets it apart from other remotes is that you can also control almost any light or appliance in your home - even in another room! And it’s easy to set up. Within minutes, you can be using your Remote to dim the lights, start brewing a fresh pot of coffee and play your favor
ملخص المحتوى في الصفحة رقم 6
GETTING STARTED 6-IN-1 REMOTE The 6-in-1 Remote lets you control practically everything electrical in your home. It has IR technology that lets you control all your TV, VCR, Cable and Satellite equipment, and RF technology that lets you control lamps and appliances anywhere in your home. To find out more about configuring the Remote to work with your audio/video equipment, refer to the following section titled “Setting Up Your Remote.” 1. Push the tab and lift off the battery cover. 2. Fit two A
ملخص المحتوى في الصفحة رقم 7
TV, VCR, CBL, AUX1, AUX2, SAT Used to select the device to control. SAT includes DBS receivers. 0-9 Used as your original remote and to enter device codes. LAST Selects the last channel viewed on your TV, VCR, Cable Box or Satellite Receiver. CHANNEL +/- Works like your original remote. Also used to switch modules on and off. MUTE Works the same as your original remote. VOLUME +/- Works like your original remote. Also used to brighten and dim lamps connected to Modules. TIMER Used to set the Sle
ملخص المحتوى في الصفحة رقم 8
SETTING UP FOR TV, VCR, CABLE BOX AND SATELLITE RECEIVER 1. Turn on the device you want to control (TV, VCR, cable box, satellite receiver etc.). 2. Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button. 3. Press and release mode button for the device you want to control. The LED blinks once. Use AUX1 or AUX2 for CD equipment. 4. Enter the 3 digit Code from the Code List (separate sheet). The LED turns off after the last digit entered. 5. Point the remote at the
ملخص المحتوى في الصفحة رقم 9
USING AUX TO CONTROL A SECOND TV, VCR, CABLE BOX OR SATELLITE RECEIVER The AUX button is normally used to control an audio component, but it can also be configured to control a second TV, VCR, cable box or satellite receiver. 1. Turn on the equipment you want to control. 2. Press and hold SETUP until the LED indicator lights steadily. Release Setup button. 3. Press the AUX1 or AUX2 button. 4. Press and release the mode button that matches the A/V equipment you want to control. The LED blinks onc
ملخص المحتوى في الصفحة رقم 10
NOTES: If your audio/video component does not respond, try the other codes for your brand. If it still doesn’t respond, try the Code Search using the followingmethod. If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Recheck the code in the code list (separate sheet) and try again. SEARCHING FOR CODES 1. Turn on the device you want to control. 2. Press and hold SETUP until the LED indicator lights steadily. Release Setup button. 3. Press the mode button
ملخص المحتوى في الصفحة رقم 11
IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE 1. Press and hold the SETUP until the LED indicator lights steadily. Release Setup button. 2. Press the mode button that matches the equipment you want to identify. The LED blinks once. 3. Press and release SETUP. The LED blinks once. 4. To find the first digit, press each number button from 0 to 9 until the LED blinks. The number you pressed is the first digit of the code. 5. Press each number button from 0 to 9 again as above to find the secon
ملخص المحتوى في الصفحة رقم 12
SETTING THE TV SLEEP TIMER The Sleep Timer automatically turns off the TV after the time you set. Press the TV button, then follow the instructions below to set the Sleep Timer: 1. Press and hold TIMER until the LED indicator lights steadily. Release the TIMER button. 2. Use the number buttons to enter the sleep time required (1 to 99 minutes). 3. Press ENTER to confirm the setting. NOTE: Take care to leave the remote pointing at the TV to ensure it turns off the TV at the time you set. CONTROLL
ملخص المحتوى في الصفحة رقم 13
HOME CONTROL FUNCTIONS: On: CHANNEL + Off: CHANNEL – Bright: VOLUME + Dim: VOLUME – All Lamps On: POWER All Modules Off: MUTE NOTE: You cannot dim or brighten an Appliance Module. If the module was off and you press Bright or Dim (VOLUME+ or VOLUME-) this will simply turn the module on. TO SET THE HOME CONTROL (HC) SLEEP TIMER The Sleep Timer switches off the chosen modules after the preset time. 1. Press and release the button with the House symbol on it. 2. Press and hold TIMER until the LED i
ملخص المحتوى في الصفحة رقم 14
6. Press ENTER to confirm the setting. CHANGING THE HOUSE CODE: The Remote defaults to House Code A, and in most cases you will not need to change this unless you are experiencing interference from a neighboring Home Control system. 1. Press and release the button with the House symbol on it. 2. Press and hold SETUP until the LED indicator lights steadily. Release Setup button. 3. Use the number buttons to enter the number equivalent to the chosen House Code (1=A, 2=B ..16=P). 4. Press the ENTER
ملخص المحتوى في الصفحة رقم 15
TROUBLESHOOTING The Transceiver Module doesn’t respond to the remote: • Check the House Code on the Transceiver Module is set to ‘A.’ If you have changed the House Code on the remote (see p. 19), check that it matches the House Code on the module. •Press the ON/OFF button on the front of the Transceiver to confirm it operates the equipment connected to it. The Transceiver Module works, but other modules don’t respond: • Check that the Module has the same House Code as the Transceiver Module. •Tr
ملخص المحتوى في الصفحة رقم 16
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such two year period the product is returned prepaid, with proof of purchase date, and a descriptio
