Nady Systems CX-23SW دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

OWNER’S MANUAL
CX-23SW
3-WAY STEREO PLUS SUBWOOFER
CROSSOVER

ملخص المحتوى في الصفحة رقم 2

CX-23SW 3-WAY STEREO+SUBWOOFER CROSSOVER Congratulations on your choice of crossover — you have purchased one of the finest stereo crossovers on the market today. This unit was developed using the expertise of professional sound engineers and working musi- cians. You will find that your new NADY AUDIO CX-23SW has superior performance and greater flexibility than any other crossovers in its price range. Please read this manual carefully to get the most out of your new unit. Thanks for selecting

ملخص المحتوى في الصفحة رقم 3

WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed

ملخص المحتوى في الصفحة رقم 4

CONTROLS AND CONNECTIONS 2 2 3 5 4 3 8 7 5 4 9 1 6 6 FRONT PANEL 1. POWER SWITCH: To turn the unit ON or OFF, press the upper or lower PLEASE READ THIS MANUAL portion of this button. The internal power LED illuminates BEFORE OPERATING THIS UNIT when the unit is turned “ON”. (Caution: Always turn the Caution : To prevent malfunctioning Crossover ON before the amplifier, and turn it OFF after and/or possible equipment damage: the amplifier or transients harmful to the speakers may result.)

ملخص المحتوى في الصفحة رقم 5

CONTROLS AND CONNECTIONS 10 XLR CAUTION BALANCE RISK OF ELECTRIC SHOCK DO NOT OPEN PIN 1 GND PIN 2 HI ATTENTION: SHOCK HAZARD - DO NOT OPEN PIN 3 LO 115V/60Hz RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR. 230V/50Hz NADY SYSTEMS, Inc. Emeryville, CA, USA AC IN Made in China FUSE 0.5A/250V HIGH MID LOW HIGH MID LOW R CHANNEL L CHANNEL OUTPUTS INPUT SUB WOOFER OUTPUTS INPUT 14 15 12 12 13 11 11 REAR PANEL 10. POWER CONNECTOR The IEC jack is used to connect the power cord to the AC Power Source.

ملخص المحتوى في الصفحة رقم 6

TYPICAL SET-UP SUBWOOFER RIGHT LEFT RIGHT LEFT RIGHT LEFT HIGH AMP MID AMP LOW AMP SUBWOOFER AMP VOL VOL VOL VOL VOL VOL VOL XLR CAUTION BALANCE RISK OF ELECTRIC SHOCK DO NOT OPEN PIN 1 GND PIN 2 HI ATTENTION: SHOCK HAZARD - DO NOT OPEN PIN 3 LO 115V/60Hz RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR. 230V/50Hz NADY SYSTEMS, Inc. Emeryville, CA, USA AC IN FUSE 0.5A/250V Made in China HIGH MID LOW HIGH MID LOW R CHANNEL OUTPUTS INPUT SUB WOOFER L CHANNEL OUTPUTS INPUT SOURCE LINE-IN 6

ملخص المحتوى في الصفحة رقم 7

SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via tele- phone at (510) 652-2411, or e-mail at service@nadywireless.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, E