ملخص المحتوى في الصفحة رقم 1
6-In-One Light and
Learn Remote
Owner’s Manual
Please read before using this equipment.
ملخص المحتوى في الصفحة رقم 2
Contents Features .................................................................. 3 A Quick Look at the Keys ..................................... 4 Preparation ............................................................. 7 Installing Batteries ............................................... 7 Device Types ....................................................... 9 Setting Up Your Remote ...................................... 9 Programming Favorite Channel Scan ............... 10 Resetting S
ملخص المحتوى في الصفحة رقم 3
Enabling Home Theater ................................ 21 Using Home Theater ..................................... 22 Using Manual Code Search .............................. 23 Checking Your Code ..................................... 23 Troubleshooting ................................................... 24 Care ................................................................... 24 Manufacturers’ Codes ......................................... 25 Amplifier Codes ..................................
ملخص المحتوى في الصفحة رقم 4
Channel Scan — lets you “channel surf” all available channels Favorite Channel Scan — lets you “surf” up to 10 of your favorite channels Programmable Power Key — controls master on/off of home entertainment devices with a single key press Programmable Macro Keys — allow instant tuning to favorite channels Mode Reassignment — lets you add control of an- other TV, VCR, DVD player or other auxiliary device in place of an existing device. Powerful Infrared Beam — lets you operate your home entertain
ملخص المحتوى في الصفحة رقم 5
The following table lists all keys and how they func- tion. Key Function P Use to program the remote control. Use to turn the backlight on or off. When on, any key press activates the back- light. It stays on for up to 5 seconds after the last key press. TV, Use to set up the remote control to VCR, replace the devices’ original remote CBL/SAT, controls. In normal operation, use to and DVD remotely select a desired device to con- trol. POWER, Use the same as the corresponding VOL +, keys on
ملخص المحتوى في الصفحة رقم 6
Key Function THEATER Use to access function keys without changing device remotes (See “Using Home Theater” on Page 20). The following tables explain how selected keys func- tion in different modes. For example, CH+ acts as a Channel-Up key in TV, VCR, and CBL/SAT modes. However, in DVD mode, CH+ acts as a Skip Forward key. CBL/ Key TV VCR SAT GUIDE Guide Program Guide MENU Menu Menu Menu INFO Display Display Information CH+ Channel Up Channel Up Channel Up CH– Channel Channel Channel Down Do
ملخص المحتوى في الصفحة رقم 7
Key DVD AUX CD GUIDE Setup Menu Guide Guide MENU DVD Menu Program Program INFO Display Display Display CH+ Skip Forward Preset + Preset + CH– Skip Reverse Preset – Preset – LAST Return Random Random TV/VCR TV/DVD Input A/B REW Rewind Rewind Rewind PLAY Play Play Play FF Fast Forward Fast Forward Fast Forward REC Record Record Record STOP Stop Stop Stop PAUSE Pause Pause Pause * On some cable/satellite remote controls, REW and FF do not punch through to VCR transport control. In- stead, these key
ملخص المحتوى في الصفحة رقم 8
Cautions: • Use only fresh batteries of the required size and recommended type. • Do not use rechargeable batteries. • Do not mix old and new batteries or different types of batteries (standard or alkaline). • Always remove old or weak batteries. Batteries can leak chemicals that can destroy electronic parts. Note: Do not press any of the remote control’s keys while installing batteries. Follow these steps to install batteries. 1. Press the battery compartment cover’s tab and lift off the cover.
ملخص المحتوى في الصفحة رقم 9
DEVICE TYPES You can use the remote control’s device keys to con- trol the following types of devices: TV — TV VCR — VCR or PVR (Personal Video Recorder) CBL/SAT — Cable converter or SAT/DSS receiver DVD — DVD or LD Player AUX — Amplifier, tuner or other audio device CD – CD Player SETTING UP YOUR REMOTE To control devices other than the default brands (for example, an RCA TV, VCR, and cable converter or SAT/DSS receiver, a Pioneer DVD player, CD player, and auxiliary device), perform the follow
ملخص المحتوى في الصفحة رقم 10
4. Hold down P until the remote’s red light blinks twice, then enter the first 4-digit manufacturer’s code for the desired device. When the red light blinks twice, the remote control has accepted the code. For example, to set up the remote control of a Panasonic TV (manufacturer’s code 0051), press TV, hold down P until the red light blinks twice, then press 0 0 5 1. Note: If you entered the code incorrectly, the red light emits one long blink. 5. Point the remote control at the desired device a
ملخص المحتوى في الصفحة رقم 11
4. Enter the two-, three- or four-digit number for your favorite channel. 5. If you entered a two- or three-digit channel num- ber, you must do one of the following: if your orig- inal remote requires you to press Enter or Select to send a command, then do so after entering the digits of your favorite channel. If your original remote does not require you to press Enter or Select to send a command, then after entering your two- or three-digit channel number, press P. If you entered a four-digit c
ملخص المحتوى في الصفحة رقم 12
PROGRAMMING MACROS Your remote has four macro keys (MUSIC, MOVIES, SPORTS, and NEWS) that store up to three channels per macro key for instant tuning of TV or cable/satellite channels. For example, if your favorite sports channel on your cable service is 061, you can store it as an in- stant tune-in macro. Follow these steps to program macros. 1. Hold down P until the red light blinks twice. 2. Press 9 9 5. The red light blinks twice. 3. Press the desired macro key (MUSIC, MOVIES, SPORTS, or NEW
ملخص المحتوى في الصفحة رقم 13
Follow these steps to program the power key. 1. Turn off all devices. 2. Hold down P until the red light blinks twice. 3. Press 9 9 5. The red light blinks twice. 4. Press POWER. 5. Press the device keys TV, VCR, CBL/SAT, DVD, CD or AUX) in the desired order. 6. Hold down P until the red light blinks twice. Resetting the Power Key Follow these steps to reset the Power key to the de- fault settings (delete the master power setup): 1. Hold down P until red light blinks twice. 2. Press 9 9 5. Th
ملخص المحتوى في الصفحة رقم 14
Note: Other reassignments are possible, including adding a second TV or second DVD player to an un- used device key. Simply repeat Step 3 with your de- sired choices. Resetting Reassigned Device Keys If you have reassigned a key (for example, you reas- signed the DVD key to operate a second VCR), and want to return to the default setting (for the example, DVD mode), follow these steps. 1. Hold down P until red light blinks twice. 2. Enter 9 9 2. The red light blinks twice. 3. Press the desired
ملخص المحتوى في الصفحة رقم 15
5. Place the device’s remote control head-to-head (about 2 inches apart) with the 6-In-One Remote. 6. On the device’s remote control, hold down the key to be learned until the red light on the 6-In-One Remote blinks twice. If the red light does not blink twice, repeat Steps 1– 5. To learn functions on another key, repeat Steps 3–6. To lock in learned functions on the 6-in-One Remote, hold down P until the red light blinks twice. To test a learned function, press the learned key on the 6-In-One R
ملخص المحتوى في الصفحة رقم 16
USING THE REMOTE Once you have completed all the programming for the remote (see “Preparation” on Page 7), you are ready to use your 6-In-One Remote. 1. Point the remote at the desired device and press the device key (TV, VCR, CBL/SAT, DVD, CD, or AUX). Then press POWER to turn on the device. 2. Press the desired command keys. 3. Repeat Steps 1 and 2 for all other devices you want to operate. 4. To turn off the last device you selected, press POWER. To turn off another device, press the device
ملخص المحتوى في الصفحة رقم 17
Note: For on-air broadcast scans, press TV, then press SCAN/FAV to start the scan. USING FAVORITE CHANNEL SCAN To scan favorite channels, you must first program the favorite channel table (see “Programming Favorite Channel Scan” on Page 10). Press the desired device key (TV or CBL/SAT), then press SCAN/FAV. The remote tunes to each favorite channel in ascending order every three seconds. Press any key to stop the scan. USING MACROS Press the desired macro key once for the first channel you prog
ملخص المحتوى في الصفحة رقم 18
CD, or AUX) upon its selection, then perform the steps listed in the appropriate section below. Volume Unlock on a Cable Convertor or SAT/DSS Receiver 1. Press CBL/SAT. 2. Hold down P until the red light blinks twice. 3. Press 9 9 3. The red light blinks twice. 4. Press VOL–. The red light blinks four times. To control the volume through your cable converter (or SAT/DSS receiver), press CBL/SAT before using the volume controls. Volume Unlock on a VCR 1. Press VCR. 2. Hold down P until the re
ملخص المحتوى في الصفحة رقم 19
2. Hold down P until the red light blinks twice. 3. Press 9 9 3. The red light blinks twice. 4. Press VOL–. The red light blinks four times. To control the volume through your auxiliary device, press CD before using the volume controls. Volume Unlock on an Auxiliary Device 1. Press AUX. 2. Hold down P until the red light blinks twice. 3. Press 9 9 3. The red light blinks twice. 4. Press VOL–. The red light blinks four times. To control the volume through your auxiliary device, press AUX before
ملخص المحتوى في الصفحة رقم 20
Note: If your device has a built-in sleep function, pressing SLEEP activates the device’s sleep timer. 3. Press SLEEP again within 10 seconds to add another 15 minutes. Repeat as desired up to a maximum of 60 minutes. 4. Place the 6-In-One Remote directly in front of the device you chose to enter sleep mode. To deactivate the Sleep Timer, press any key. The red light stops blinking. Locking/Unlocking the Sleep Timer The 6-in-One Remote’s built-in sleep function can be enabled even if another dev
