ملخص المحتوى في الصفحة رقم 1
RM94931
Universal Remote
Instruction Manual
ملخص المحتوى في الصفحة رقم 2
Table of Contents Introduction ............................................................ 3 Setup ..................................................................... 3 Battery Installation ............................................ 3 Battery Saver .................................................... 3 Code Saver ...................................................... 3 Code Setup ...................................................... 3 Button Functions ............................
ملخص المحتوى في الصفحة رقم 3
Setup Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. . Match the batteries to the + and - marks inside the battery case, then insert AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushion
ملخص المحتوى في الصفحة رقم 4
Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature. TV, CBL/SAT, VCR, DVD/ Red Indicator AUX Selects pr
ملخص المحتوى في الصفحة رقم 5
Button Functions, cont. SETUP Used to setup ON-OFF Turns the remote, and for code product On or Off. search function. Backlight Lights up the buttons on the remote when pressed. See page 10 for more details. MUTE Turns off the TV sound while the picture remains. VOLUME UP/DOWN Changes the volume level of the product, normally the TV. CHANNEL Up/Down Changes the channels. The Channel buttons also control DVD SKIP functions. INPUT Selects the video inputs of your TV if equippe
ملخص المحتوى في الصفحة رقم 6
Menu Operation The Menu button puts the remote in and out of Menu Mode. Pressing Menu brings up your device Menu. While in Menu mode the remote’s red indicator light blinks continuously. The remote will exit Menu Mode after 0 seconds if no keys are pressed. When in Menu Mode, the Menu, Channel, Volume, Mute and Device keys operate as follows: MENU Enters Menu mode. CHANNEL UP/DOWN Cursor Up/Down for Menu navigation. VOLUME UP/DOWN Cursor Right/Left for Menu navigation. MUTE (OK) com
ملخص المحتوى في الصفحة رقم 7
Direct Code Entry SETUP 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. TV . Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code 1 2 3 from the code tables (on separate sheet). 4 5 6 Note: after a valid code entry, the red indicator turns off. For 7 8 9 an invalid code, the red indicator flashes. 4. With your device on, press ON/OFF. If the d
ملخص المحتوى في الصفحة رقم 8
Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. . Press and hold the SETUP button SETUP until the red indicator stays on, then release the SETUP button. 3. Press and quickly release the desired TV device button (TV, VCR, etc.). The red indicator blinks off once. 4. Press the ON-OFF but
ملخص المحتوى في الصفحة رقم 9
Using Your Remote Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: SETUP 1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button. TV . Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays li
ملخص المحتوى في الصفحة رقم 10
Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off. Controlling Combo Devices Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/ DVD Combo, you might need to
ملخص المحتوى في الصفحة رقم 11
Using Your Remote, cont. Volume/Mute Control and Punch-Through This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode. Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute fun
ملخص المحتوى في الصفحة رقم 12
Using Your Remote, cont. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing. SETUP 1. Press and hold the SETUP button until the red indicator turns on, then release the button. . Press and hold the MUTE button until MUTE the red indicator blinks off, then release the button. 3. Press and release
ملخص المحتوى في الصفحة رقم 13
Troubleshooting Remote does not operate your product. • Press the device button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. Remote does not operate some features of your product. • Sometimes a particular code might operate some features but not all. Try programing remote with a new code. • Remote may not
ملخص المحتوى في الصفحة رقم 14
Notes 14
ملخص المحتوى في الصفحة رقم 15
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long a
ملخص المحتوى في الصفحة رقم 16
RM94931 Universal Remote Instruction Manual Jasco Products Company 311 N.W. 1 nd Oklahoma City, OK 73114 Made in China RM 4931-
