ملخص المحتوى في الصفحة رقم 1
PROFESSIONAL DIGITAL TWO-WAY RADIO
MOTOTRBO™
XPR™ 7350
NON-DISPLAY PORTABLE
USER GUIDE
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Declaration of Conformity Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1301 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product: Model Name: XPR 7350 conforms to the following regulations: FCC Part 15, subpart B, section 15
ملخص المحتوى في الصفحة رقم 4
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf
ملخص المحتوى في الصفحة رقم 5
Contents Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . .6 Contents Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . .7 This User Guide contains all the information you need to Assignable Radio Functions . . . . . . . . . . . . . . . . .7 use the MOTOTRBO XPR Series Digital Portable Radios. Assignable Settings or Utility Functions . . . . . . . . .8 Declaration of Conformity . . .
ملخص المحتوى في الصفحة رقم 6
Making a Call with the Channel Selector Knob . . 18 Sending an Emergency Alarm . . . . . . . . . . . . . . 27 Making a Group Call . . . . . . . . . . . . . . . . . . . . 18 Sending an Emergency Alarm with Call . . . . . . . 28 Making a Private Call . . . . . . . . . . . . . . . . . . . 19 Sending an Emergency Alarm with Voice to Making a Selective Call . . . . . . . . . . . . . . . . . 19 Follow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Making an All Call . .
ملخص المحتوى في الصفحة رقم 7
Contents Turning the Voice Operating Transmission (VOX) Feature On or Off . . . . . . . . . . . . . . . . . . . . . . . . . 36 Turning Radio Tones/Alerts On or Off . . . . . . . . . 37 Checking the Battery Strength . . . . . . . . . . . . . . . 37 Voice Announcement . . . . . . . . . . . . . . . . . . . . . . 37 Intelligent Audio . . . . . . . . . . . . . . . . . . . . . . . . . . 38 GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Accessories . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 8
Any modification to this device, not expressly authorized Important Safety Information by Motorola, may void the user’s authority to operate this device. Product Safety and RF Exposure Compliance Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and Before using this product, read the operating maximum (or lesser) gain approved for the transmitter by instructions for safe usage contained in the Industry Canada. To reduce potential radio
ملخص المحتوى في الصفحة رقم 9
Computer Software Copyrights TM The AMBE+2 voice coding Technology embodied in Computer Software Copyrights this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of The Motorola products described in this manual may Digital Voice Systems, Inc. include copyrighted Motorola computer programs stored This voice coding Technology is licensed solely for use in semiconductor memories or other media. Laws in the within this Communications
ملخص المحتوى في الصفحة رقم 10
• Never poke the vent (hole) located on the radio chassis Handling Precautions below the battery contact. This vent allows for pressure equalization in the radio. Doing so may create a leak The MOTOTRBO Series Digital Portable radio meets path into the radio and the radio’s submersibility may IP57 specifications, allowing the radio to withstand be lost. adverse field conditions such as being submersed in • Never obstruct or cover the vent, even with a label. water. • Ensure that no oily s
ملخص المحتوى في الصفحة رقم 11
Getting Started For features that are available in a conventional multi-site mode, see IP Site Connect on page 10 for more information. Getting Started Selected features are also available on the single-site trunking Take a moment to review the following: mode, Capacity Plus. See Capacity Plus on page 10 for more How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1 information. What Your Dealer/System Administrator Selected features are also available in the multi-s
ملخص المحتوى في الصفحة رقم 12
Charging the Battery Preparing Your Radio for Use For best performance, your radio is powered by a Assemble your radio by following these steps: Motorola-approved Nickel Metal-Hydride (NiMH) or Lithium-Ion Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2 (Li-lon) battery. To avoid damage and comply with warranty Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 terms, charge the battery using a Motorola charger exactly as Attac
ملخص المحتوى في الصفحة رقم 13
Preparing Your Radio for Use Attaching the Battery Attaching the Antenna Align the battery with the rails on the back of the radio. Press With the radio turned off, set the the battery firmly, and slide upward until the latch snaps into antenna in its receptacle and turn place. Slide battery latch into lock position. clockwise. To remove the antenna, turn the antenna counterclockwise. If antenna needs to be replaced, ensure that only MOTOTRBO antennas are used. Neglecting this will damage
ملخص المحتوى في الصفحة رقم 14
Attaching the Belt Clip Attaching the Universal Connector Cover (Dust Cover) The universal connector is located on the antenna side of the Align the grooves on the clip radio. It is used to connect MOTOTRBO accessories to the with those on the battery and radio. press downward until you hear a click. Insert the hooked end of the cover into the slots above the To remove the clip, press the universal connector. Press belt clip tab away from the downward on the cover to battery using a
ملخص المحتوى في الصفحة رقم 15
Preparing Your Radio for Use Powering Up the Radio Adjusting the Volume Rotate the On/Off/Volume To increase the volume, turn the On/Off/Volume Control Knob Control Knob clockwise until clockwise. you hear a click. The LED lights up solid green. A brief tone sounds, indicating that the power up test is successful. NOTE: There is no power up tone if the radio tones/alerts function is disabled (see Turning Radio Tones/Alerts On or Off on page 37). If your radio does not power up, check y
ملخص المحتوى في الصفحة رقم 16
Identifying Radio Controls 12 Take a moment to review the following: 1 Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 11 2 Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . page 7 Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . . page 8 10 3 Switching Between Conventional Analog and Digital Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9 4 9 IP Site Connect . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 17
Identifying Radio Controls Call Forwarding – Toggles Call Forwarding on or off. Programmable Buttons Voice Announcement for Channel – Plays zone and channel Your dealer can program the programmable buttons as announcement voice messages for the current channel. This shortcuts to radio functions or preset channels/groups function is unavailable when Voice Announcement is disabled. depending on the duration of a button press: Emergency – Depending on the programming, initiates or • Short pre
ملخص المحتوى في الصفحة رقم 18
‡ Permanent Monitor* – Monitors a selected channel for all Assignable Settings or Utility Functions radio traffic until function is disabled. All Tones/Alerts – Toggles all tones and alerts on or off. Privacy – Toggles privacy on or off. Power Level – Toggles transmit power level between high and ‡ Repeater/Talkaround* – Toggles between using a repeater low. and communicating directly with another radio. Squelch – Toggles squelch level between tight and ‡ Scan* – Toggles scan on or off. no
ملخص المحتوى في الصفحة رقم 19
Identifying Radio Controls • While a call is not in progress, the PTT button is used to make Switching Between Conventional Analog a new call (see Making a Radio Call on page 18). and Digital Mode Depending on programming, if the Talk Permit Tone or the PTT Each channel in your radio Channel Selector Knob Sidetone is enabled, wait until the short alert tone ends can be configured as a before talking. conventional analog or conventional digital channel. During a call, if the Channel Free
ملخص المحتوى في الصفحة رقم 20
You cannot manually add or delete an entry to the roam list. IP Site Connect Check with your dealer or system administrator for more information. This feature allows your radio to extend conventional communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Capacity Plus Protocol (IP) network. When the radio moves out of range from one site and into the Capacity Plus is a single-site trunking configuration of the range
