Xantech HDMI4X1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 5

RS232 INTERFACE Binary Table ASCII Input Binary 1 1 0011 0001 2 2 0011 0010 3 3 0011 0011 4 4 0011 0100 Terminal Settings Bits per second 19200 Data bits 8 Parity None Stop bits 1 Flow Control None SPECIFICATIONS Video Amplifier Bandwidth 1.65 GHz Input Video Signal 1.2 volts p-p Input DDC Signal 5 volts p-p (TTL) Single Link Range 1080p / 1920 x 1200 Input Connector Type HDMI Output Connector Type HDMI Remote Control Port Male RS232 Pow

ملخص المحتوى في الصفحة رقم 6

Technical Support Mailing Address Hours: 7AM-5PM Pacific Xantech Corporation Phone: 800.843.5465 13100 Telfair Avenue, 2/F press 2 for Tech Support Sylmar, CA 91342 Fax: 800.492.6832 email: tech@xantech.com HDMI4X1 User Manual © 2007 Xantech Corporation This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Document Number 08905128A

ملخص المحتوى في الصفحة رقم 1

HDMI4X1
User Manual
























www.xantech.com



- 1 -

ملخص المحتوى في الصفحة رقم 2

INTRODUCTION Congratulations on your purchase of the HDMI4X1 Switcher. The 4x1 HDMI Switcher allows access to four HDTV devices, using one HDTV display. The line offers solutions for Home Theater, AV installation, data center, information distribution, conference room presentation, school and corporate training environments. The HDMI4X1 Switcher allows four HDTV HDMI devices to be switched easily in to one HDTV HDMI compatible monitor or projector. Simply connect your HDTV display

ملخص المحتوى في الصفحة رقم 3

INSTRUCTIONS 1 Connect the supplied cables from the HDTV HDMI sources into the 4x1 HDMI Switcher inputs. 2 Connect the cables from your display (monitor or projector) into the HDMI out of the 4x1 HDMI Switcher. 3 Plug the 5VDC power supply into the 4x1 HDMI Switcher. * Adjust the EQ knob to remove signal noise resulting from longer input cables How to Control the 4x1 HDMI Switcher Use the RMT4-IR remote control to toggle between sources. RMT4-IR INSTRUCTIONS 1. Remove batte

ملخص المحتوى في الصفحة رقم 4

- 4 -