ملخص المحتوى في الصفحة رقم 1
INSTALLATION MANUAL
PLASMA DISPLAY MOUNT MODEL
3130 E. Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888
VISIT US AT WWW.MOUNTS.COM
ملخص المحتوى في الصفحة رقم 2
Introduction Plasma display manufacturers are constantly improving their products and introducing new ones. We are committed to keeping up with them. That’s why we maintain close relationships with all major OEMs – to ensure that we have the latest information on new display products coming to market. Our mounts are often available before the corresponding displays are even on sale. Mounts are available in either flat or tilt versions, this versatile mount can be used for just
ملخص المحتوى في الصفحة رقم 3
Safety & Precautions WARNING: Safety precaution measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installations procedure to prevent personal injury or damage to the plasma displays or plasma mounts. The wall or ceiling structure must be capable of supporting at least five (5) times the weight of plasma display. If not, the wall or ceiling must be reinforced. Proper installation procedure by
ملخص المحتوى في الصفحة رقم 4
Mount Diagrams Our PSM flat / tilt mounts are designed for wall or ceiling mounting, or it can mate with any of our popular carts, floor stands or wall arms. The ultra slim plasma mount stands off the wall just enough for proper, OEM-specified ventilation, yet keeps the plasma close enough for a clean, seamless look. It allows either vertical (portrait) or horizontal (landscape) display configuration. UNIVERSAL FLAT MOUNT 19.500 a 16.000 0.500 Ø0.375 (x4) PART#: 2.125
ملخص المحتوى في الصفحة رقم 5
Parts List Standard hardware QTY SIZE DESCRIPTION 6 (Tilt) – 4 (Flat) 5/16” Dia Lag bolts 1 PSM series mount 1 Flat / Tilt mount 2 M6 x 12 (mm) Phillip security Used on Tilts, Carts, floor screws stands and ceiling mounts only 1 Installations instructions 1 Bubble level PSM-Series Mounting hardware QTY SIZE DESCRIPTION PSM-Mount 6 M5 x 16 Phillip screws PSM-313 4 M6 x 12 P
ملخص المحتوى في الصفحة رقم 6
(Optional) ceiling adapters AST-2446: 1½" (Adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46" (12" - 24", if you cut down), this suspension adapter mates with the single display swivel adapter and 1½" (NTP) pipe. AST-2446/2: 2" (Heavy-duty adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46" (12" - 24", if you cut down), this suspension adapter mates with the dual display
ملخص المحتوى في الصفحة رقم 7
Installing the PSM-Series mount WARNING : Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury and possible damage to the plasma display. Step 1 CAUTION: The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product. Invert the plasma display and set it on a soft, flat surface to
ملخص المحتوى في الصفحة رقم 8
Securing the universal flat or tilt mounts Step 3 Securing the flat mount CAUTION: The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product. All plasma models vary depending on the manufacturer and some are centered and others are not. Please verify that your plasma mounting points from the back of the chassis are centered before installing the universal back plate. Select the area where the pl
ملخص المحتوى في الصفحة رقم 9
Step 3 Securing the flat mount To det ermine the desired viewing height, use the center slot opening in the wall mount as a center reference for the plasma television when mounted. Once the height is determined, use the bubble level to insure that the bracket is level. Next, using a pencil, mark the four (4) lag bolt slot openings on the mounting bracket. Before continuing, confirm the marks are located on the center of the studs. Drill 1/4" pilot holes on the four (4) markings o
ملخص المحتوى في الصفحة رقم 10
Mount interlocking Step 5 Warning: The plasma display is heavy and 2 people are needed to lift and install it. Failure to do so could result in serious personal injury. Before placing the plasma on the wall recheck all hardware for proper tightness and security. Align the PSM series mount tab openings to the receiving tabs on the universal flat mount or tilt mount. Slide the plasma down, right and down again to lock the mounts together. Make sure all tab openings are interlocked