ملخص المحتوى في الصفحة رقم 1
Operating Instructions
14" LCD TV with DVD Player
Region / Region discs only
TELETEXT
14LD
Before operating the unit, please read this manual thoroughly.
ملخص المحتوى في الصفحة رقم 2
WARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture. MAINS SUPPLY This unit is designed to operate from AC 240V 50Hz household mains supply. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT. CLASS 1 LASER PRODUCT WHEN THIS UNIT IS PLUGG
ملخص المحتوى في الصفحة رقم 3
FEATURES TV • Repeat Playback • TELETEXT Function • Memory/Random Playback • On-Screen Programming • Zoom • Picture Control Adjustments • Video Aspect Ratio • Auto Power Shut Off •Parental Control • On Screen 5 Language Display • Digital output for Dolby Digital (AC-3) and DTS • Sleep Timer • Playback of DVD, Audio-CD and MP3/JPEG-CD • Programmable ON/OFF Timer •PAL & NTSC DVDs playback • A-B Repeat playback DVD Player • Digital Audio Jack (Coaxial) • Multi-Language • Multi-Angle CONTENTS SETTIN
ملخص المحتوى في الصفحة رقم 4
NO ! NO ! PRECAUTIONS Under certain conditions, such as low humidity or walking across wool carpet, you may experience a static discharge when touching the unit. If this happens and it fails to function, follow the procedure below. 1) Un-plug the unit from the AC socket. 2) It may take two to three hours for the static build up to clear. 3) Re-plug the unit again. Do not place the unit on or near appliances Avoid extreme heat and cold. which may cause electromagnetic interference eg. TV or hi-fi
ملخص المحتوى في الصفحة رقم 5
LOCATION OF CONTROLS Top POWER button CHANNEL UP/DOWN buttons VOLUME UP/DOWN buttons Front Remote sensor Standby indicator Left Side Right Side Handle DISC slot PLAY 1 button Headphones socket STOP 3 button SKIP 7/6 buttons EJECT 5 button AUDIO (L/R)/VIDEO IN (AV IN 3) sockets 3
ملخص المحتوى في الصفحة رقم 6
LOCATION OF CONTROLS (CONTINUED) Rear Cable holder COAXIAL DC input socket DIGITAL AUDIO RF IN socket OUT socket SCART input socket AUDIO (L/R)/VIDEO IN (AV IN 2) sockets Variable TV-screen angle Approx. 15˚ 0˚ Approx. 5˚ You can adjust the angle of the TV-screen for 5˚ forward or for 15˚ backward from vertical angle. 4
ملخص المحتوى في الصفحة رقم 7
REMOTE CONTROL Page Power on/off 11,15,25,27 DISPLAY Display TV or DVD operation status 16,25 TV/DVD Select to operate TV or DVD 10,11,15,25,26,27 (EJECT) Ejects the disc 27 0-9 Direct channel selection of TV 15 Input setting 30,33 Enter a security code 40,41,42 VOL +/– Volume Up/Down 15 MUTE Mute 16 0/AV Scart Input or AV input 10,16 SLEEP Sleep timer 16 SETUP/MENU Display the setup menu 11~14,17~20,26,31,32,38~41,43~45 DVD MENU Select menu of a DVD disc 37 M M ? ? CH/PAGE M M M/? ? ? Select c
ملخص المحتوى في الصفحة رقم 8
REMOTE CONTROL (CONTINUED) INSERTING BATTERY Open the battery compart- Install two “AAA” batteries Replace the compartment ment cover in the direction (supplied), paying attention cover. of the arrow. to the polarity diagram in the battery compartment. OPERATION • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a dis- tance of Approx. 5 meters. Approx. 5 metres NOTES: • Do n
ملخص المحتوى في الصفحة رقم 9
POWER SOURCE TO USE AC POWER 1. Connect the AC mains lead to the AC adaptor. 2. Connect the AC adaptor plug into this unit’s DC input socket. 3. Connect the AC mains lead into an AC socket. 4. The Standby indicator will light. AC 240V, 50Hz AC mains lead (supplied) AC adaptor (supplied) NOTES: • Please make sure to insert the plug of each cord securely. • During use the AC adaptor becomes warm. This is not a malfunction. WARNING: • DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER TH
ملخص المحتوى في الصفحة رقم 10
ANTENNA CONNECTIONS Connect an indoor or outdoor antenna to the antenna socket at the rear panel as shown below. For all antenna circuit problems, please consult your local dealer. Antenna socket EXTERNAL ANTENNA The type of antenna required depends on the position of your home, its distance from the transmitter and local interference. If you do not have an antenna and you are uncertain of what to buy, you should seek the advice of a local antenna contractor. 8
ملخص المحتوى في الصفحة رقم 11
CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the User Guide provided with each component for the location of video and audio inputs and outputs. Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround sound decoder (such as Dolby Digital / DTS / MPEG / etc.), you can connect it as shown below. Rea
ملخص المحتوى في الصفحة رقم 12
CONNECTION TO OTHER EQUIPMENT (CONTINUED) Input Selection If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the 0/AV button. AV1(Scart socket) Press the TV/DVD button to select TV mode and AV1 then press the 0/AV button repeatedly to select AV1, AV2(Rear AV input) AV2 or AV3. AV3(Left AV input) 1. To connect the unit to a VCR TV-program Press the 0/AV button to select AV1 to use the TV as a monitor. Rear lower left of unit (AV IN 2) Scart socket
ملخص المحتوى في الصفحة رقم 13
LANGUAGE SETTING This unit has 5 different languages PREPARATION for MENU set up which can be Press Power on the top of the unit or remote control to turn selected through the ON Screen on the unit. Display: English, German, French, Italian or Spanish. Press TV/DVD to select TV MENU 1 ON/OFF TIMER mode. Then press MENU. CH TUNING PICTURE AUDIO NICAM AUTO OFF AV COLOUR AUTO LANGUAGE LANGUAGE PRESS: ▲ / ▼ / ENTER / MENU To select the LANGUAGE mode, MENU 2 ON/OFF TIMER press or , then press CH
ملخص المحتوى في الصفحة رقم 14
PRESETTING THE CHANNELS Once you have connected up this unit, - Automatic tuning The stations will be preset in the order you will need to tune in the channels in that they appear when the automatic order to watch TV stations. There are two tuning is activated. ways that you can do this: - Manual tuning In this mode the TV searches until a picture appears. If it is a station that you want to keep, you can choose which channel preset you want to store it on. You repeat this procedure for each
ملخص المحتوى في الصفحة رقم 15
PRESETTING THE CHANNELS MANUAL TUNING How to tune a station to channel 10 position. Press MENU. MENU 1 ON/OFF TIMER Press or to select the CH TUNING PICTURE CH TUNING mode, then press AUDIO ENTER. NICAM AUTO OFF AV COLOUR AUTO LANGUAGE LANGUAGE PRESS: ▲ / ▼ / ENTER / MENU Press or to select the 2 MANUAL mode, then press CH TUNING ENTER. MANUAL AUTO CH ALLOCATION ▲ ▼ PRESS: / / ENTER / MENU Press or to select PAL or 3 SECAM-L. Then press ENTER. CH 1 PAL PRESS: B / A/ENTER/MENU Press
ملخص المحتوى في الصفحة رقم 16
PRESETTING THE CHANNELS (CONTINUED) TO CHANGE THE CHANNELS EXAMPLE: Changing of channel position from CH2 and CH5. Press MENU. 1 MENU ON/OFF TIMER Press or to select the CH TUNING CH TUNING mode, then press PICTURE AUDIO ENTER. NICAM AUTO OFF AV COLOUR AUTO LANGUAGE LANGUAGE ▲ ▼ PRESS: / / ENTER / MENU Press or to select the CH 2 ALLOCATION mode, then press CH TUNING ENTER. MANUAL AUTO CH ALLOCATION ▲ ▼ PRESS: / / ENTER / MENU 3 Press or to select the CH 2 channel position No. (bro
ملخص المحتوى في الصفحة رقم 17
TV OPERATIONS Once you have correctly connected Press Power on the top of the unit or remote control to 1 and set up the channels on your set, turn on the unit. The standby indicator will go off. you can view the channels as Press TV/DVD to select TV mode. follows. Direct Channel Selection buttons (0-9) 2 Press the Direct Channel Selection buttons on the remote control. 1-9 CH: Press your required number only. 10-110 CH: Press the two or three digits in accordance to the channel numbers requir
ملخص المحتوى في الصفحة رقم 18
CONVENIENT FUNCTIONS The following functions are available TV/AV Selection from the remote control handset only. For receiving the desired signal: Press AV to select the TV or AV mode. TV position - to view a AV position - to receive normal TV programme. through the direct Video in- put. AV1 (from 21 pin SCART socket on the rear), AV2 (from Audio/Video in sockets on the rear) or AV3 (from Audio/ Video in sockets on the left side) indicator appears on the screen in AV mode. QUICK VIEW Th
ملخص المحتوى في الصفحة رقم 19
ON/OFF TIMER The on timer feature allows you to Press MENU. MENU 1 automatically turn on your TV after a ON/OFF TIMER CH TUNING preset amount of time (up to 12 hours and PICTURE Press ▲ or ▼ to select ON/ AUDIO 59 minutes) on the selected channel. OFF TIMER mode. NICAM AUTO OFF The off timer also allows you to turn off AV COLOUR AUTO LANGUAGE LANGUAGE your TV after a preset amount of time. You Press ENTER. PRESS: ▲ / ▼ / ENTER / MENU can set the off timer in conjunction with the on timer. Pre
ملخص المحتوى في الصفحة رقم 20
PICTURE ADJUSTMENTS The picture settings have been Press MENU. 1 adjusted at the factory under optimum signal reception conditions. However, you can adjust for BRIGHTNESS, Press or to select the 2 MENU CONTRAST, COLOUR and SHARP- ON/OFF TIMER PICTURE mode, then press CH TUNING NESS to your preference. ENTER. PICTURE AUDIO NICAM AUTO OFF AV COLOUR AUTO LANGUAGE LANGUAGE ▲ ▼ PRESS: / / ENTER / MENU To adjust the BRIGHTNESS, 3 press or , then press . BRIGHTNESS 0 PRESS: B/A/C/D/MENU NOTE: Ea
