Winegard RP-RS30 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Omnidirectional TV/FM Antenna
For Technical Services,
email help@winegard.com or call 1-800-788-4417.
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE.
DO NOT SNAP THE ANTENNA HEAD AND PEDESTAL
TOGETHER PRIOR TO READING MANUAL.
2452249

ملخص المحتوى في الصفحة رقم 2

Specifications Safety Recommendations Range of up to 35 miles* Models RS-3000 (white), RS-3035 (black) Do not attempt to install this system in Do not paint this antenna. Painting the rain or under any wet conditions. the antenna will void your warranty. For VHF & UHF channels Models RP-RS30 (white) replacement head and RP-RS35 (black) For outdoor use only replacement head are available. Choosing a Location for the Antenna & Power Supply Amplified *Antenna reception may vary based on transmi

ملخص المحتوى في الصفحة رقم 3

Mounting Option 1 Mounting Option 1, Cont. If installing the antenna so that the cable enters the vehicle directly 12. Run a solid bead of sealant where the edge of the pedestal and gasket beneath the antenna, follow the steps below for Mounting Option 1. assembly meets the roof and over the screw heads. 13. 1. Make sure the ceiling area is clear underneath Gently push the cable slack downward through the pedestal. the chosen location for the antenna. 14. Twist the antenna head back and forth

ملخص المحتوى في الصفحة رقم 4

Mounting Option 2 Mounting Option 2, Cont. If installing the antenna so that the cable enters the vehicle via a cable entry 12. While applying pressure, rotate the head until feeling the grooves in the plate (sold separately), follow the steps below for Mounting Option 2. head line up with the grooves in the pedestal. 1. Run coaxial cable from the power supply to the antenna via the cable 13. Push down again; you should hear the head click into place. entry plate. The antenna needs to be at lea

ملخص المحتوى في الصفحة رقم 5

Installing the Power Supply Warning: The power supply should be turned off when connecting cables. Indicator light On/Off Coaxial button port for Set 2 Antenna main TV port port Power & Cable Ground port tabs The power supply may be flush the “SET 2” port to the “Antenna In” mounted in most standard electrical port on the second television. boxes. To flush mount, cut a hole in Running a Channel Scan the wall to fit the box. Run two #12 If hooking up a cable input, connect wires betw

ملخص المحتوى في الصفحة رقم 6

Troubleshooting WINEGARD MOBILE PRODUCTS LIMITED WARRANTY (2 YEARS PARTS; 1 YEAR LABOR) Winegard Company warrants this product against defects in materials or workmanship for a Do not install couplers, splitters, etc. The power supply should be turned period of two (2) years from the date of original purchase. During year one (1) of such warranty, between the power supply and the OFF when connecting/disconnecting Winegard Company will also pay authorized labor costs to an authorized Winegar

ملخص المحتوى في الصفحة رقم 7

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 800-288-8094 • F ax 319-754-0787 • www .winegard.com • P rinted in U .S .A . ©2011 Winegard Company Rev4 7/12 2452249 Winegard is a registered trademark of Winegard Company, and RoadStar is a trademark of Winegard Company. dtv.gov is not affiliated with Winegard Company. Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any er