Bogen CommunicationsWB1EZ دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TM
Easy Design Speaker
Model WB1EZ
Speaker Layout
Figure 1
The layout of the speakers should be planned prior to
installation. Because wall baffle speakers are designed to
START SPEAKER
project forward, it is best to aim them in the same direc-
tion, as this provides for both greater coverage and clarity.
You can use the building’s roof pillars or other available
10’
supports for mounting the wall baffles. In some cases, it
may be necessary to mount the wall baffles on opposing
walls. In these

ملخص المحتوى في الصفحة رقم 2

Speaker Installation STEP 1 - Mark the point from which to hang the speaker. Drill Figure 3 an appropriately sized hole in the wall and insert an anchor. Drive the screw into the anchor leaving enough of the screw exposed from which to hang the speaker on. See Figure 3. NOTE: Wall baffle speakers should be installed between 8 and 16 feet from the floor depending upon need. STEP 2 - Make the electrical connections using the 2 screw ter- minals on the WB1EZ. The recommended amplifier connections W