ملخص المحتوى في الصفحة رقم 1
14 GauGe
Swivel Head SHear
Model 92115
Set up and OperatinG inStructiOnS
visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
Save tHiS Manual.
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may
ملخص المحتوى في الصفحة رقم 2
nOtice is used to Save tHiS Manual address practices not Keep this manual for the safety warnings related to personal injury. and precautions, assembly, operating, cautiOn, without the inspection, maintenance and cleaning safety alert symbol, is procedures. Write the product’s serial number used to address practices not in the back of the manual near the assembly related to personal injury. diagram (or month and year of purchase if product has no number). Keep this manual General
ملخص المحتوى في الصفحة رقم 3
increased risk of electric shock if your trigger or energizing power tools that body is grounded. have the trigger depressed invites accidents. c. do not expose power tools to rain or wet conditions. Water entering d. remove any adjusting key or wrench a power tool will increase the risk of before turning the power tool on. electric shock. A wrench or a key left attached to a rotating part of the power tool may result d. do not abuse the cord. never use in personal injury. the cord fo
ملخص المحتوى في الصفحة رقم 4
c. disconnect the plug from the Shear Safety warnings power source before making any 1. Handle sheet metal with care. Sheet adjustments, changing accessories, metal will have sharp edges. w ear or storing power tools. Such anSi-approved safety goggles, heavy- preventive safety measures reduce duty work gloves, long sleeve shirt, the risk of starting the power tool and jeans when working with sheet accidentally. metal. d. Store idle power tools out of the reach of children and do no
ملخص المحتوى في الصفحة رقم 5
implemented – it prevents sustained injury, particularly to the hands, arms electrical shock. and shoulders. To reduce the risk of vibration-related injury: 9. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and 1. Anyone using vibrating tools regularly other construction activities, contains or for an extended period should first chemicals known [to the State of be examined by a doctor and then have California] to cause cancer, birth defects regular medical check
ملخص المحتوى في الصفحة رقم 6
preceding illustration. GrOundinG (See Outlets for 2-prong plug.) tO prevent electric SHOcK extension cords and deatH FrOM incOrrect 1. Grounded tools require a three wire GrOundinG wire extension cord. Double Insulated cOnnectiOn: tools can use either a two or three wire Check with a qualified electrician extension cord. if you are in doubt as to whether the outlet is properly grounded. 2. As the distance from the supply outlet do not modify the power cord increases, you must
ملخص المحتوى في الصفحة رقم 7
8. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. recOMMended MiniMuM wire GauGe FOr eXtenSiOn cOrdS* (120/240 vOlt) eXtenSiOn cOrd naMeplate lenGtH aMpereS (at full load) 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18 16 14 12 5.1 – 7.0 18 16 14 12 12 7.1 – 12.0 18 14 12 10 - 12.1 – 16.0 14 12 10 - - 16.1 – 20.0 12 10 - - - * Based on limiting the line voltage drop to five volts at taBle a 150% of the rated amperes. Symbology Doubl
ملخص المحتوى في الصفحة رقم 8
SpeciFicatiOnS OperatinG inStructiOnS Electrical Input 120 V~ / 60 Hz / 2.2 A (no load) read the entire iMpOrtant Motor Speed 0-2500 RPM (no load) SaFetY inFOrMatiOn Capacity Up to 14 gauge sheet metal section at the beginning of this Up to 18 gauge stainless steel manual including all text under @ 150 inches per minute subheadings therein before set up Cutting Blades Tungsten Carbide Steel Cutting Head Swivels 360° or use of this product. SwivelinG tHe cutter Head unpacKinG tO prevent
ملخص المحتوى في الصفحة رقم 9
w ork piece and w ork area Set up General Operating instructions 1. Designate a work area that is clean and 1. w ear anSi-approved safety goggles, well-lit. The work area must not allow heavy-duty work gloves, long sleeve access by children or pets to prevent shirt, and jeans. distraction and injury. 2. Plug the tool into an appropriate, breaker 2. Route the power cord along a safe switch protected power outlet. route to reach the work area without 3. Position the jaws of the Shear over the
ملخص المحتوى في الصفحة رقم 10
right cutting Maintenance and Blade (24) Head ServicinG (22) Procedures not specifically center explained in this manual must Blade (25) be performed only by a qualified technician. Bushing (26) tO prevent SeriOuS injur Y Head FrOM accidental left Blade (27) Bolts (28) OperatiOn: 3. The three Blades (24, 25, and 27) and release the t rigger and unplug the two Bushings (26) will be loose. the tool from its electrical outlet before performing any 4. Clean, replace or sharpen th
ملخص المحتوى في الصفحة رقم 11
t roubleshooting problem possible causes likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. 3. Tool’s thermal reset breaker 3. Turn off tool and allow to cool. Press reset button tripped (if equipped). on tool. 4. Internal damage or
ملخص المحتوى في الصفحة رقم 12
pleaSe read tHe FOllOwinG careFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAkE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACE
ملخص المحتوى في الصفحة رقم 13
aSSeMBl Y diaGraM rev 06f, 10a SKU 92115 For technical questions, please call 1-800-444-3353. Page 13 2 1 35 11 10 9 8 5 7 6 4 3 34 19 18 13 12 23 22 14 17 24 21 20 30 25 16 15 26 31 32 29 33 27 28
ملخص المحتوى في الصفحة رقم 14
To take advantage of this warranty, liMited 90 da Y warrantY the product or part must be returned to us Harbor Freight Tools Co. makes every with transportation charges prepaid. Proof effort to assure that its products meet of purchase date and an explanation of the high quality and durability standards, and complaint must accompany the merchandise. warrants to the original purchaser that this If our inspection verifies the defect, we product is free from defects in materials and will eit
