ملخص المحتوى في الصفحة رقم 1
User’s manual
CL82101/CL82201/CL82301/
CL82351/CL82401/CL82451/
CL82501/CL82551/CL82601
DECT 6.0 cordless telephone/
answering system with
caller ID/call waiting
ملخص المحتوى في الصفحة رقم 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 73-74 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: CL82101 (one handset)
ملخص المحتوى في الصفحة رقم 3
BT183342/BT283342 2.4V 400mAh Ni-MH BY 1021 Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Quick start guide CL82101/CL82201/CL82301/ CL82101/CL82201/CL82301/ CL82351/CL82401/CL82451/ CL82351/CL82401/CL82451/ CL82501/CL82551/CL82601 CL82501/CL82551/CL82601 DECT 6.0 cordless telephone/ DECT 6.0 cordless telephone/ answering system with answering system with caller I
ملخص المحتوى في الصفحة رقم 4
User’s manual CL82101/CL82201/CL82301/ CL82351/CL82401/CL82451/ CL82501/CL82551/CL82601 DECT 6.0 cordless telephone/ answering system with caller ID/call waiting Table of contents Getting started Dial mode .............................................. 17 Quick reference guide - handset ........1 Website ................................................... 17 Quick reference guide - telephone base .............................................................3 Telephone operation Installat
ملخص المحتوى في الصفحة رقم 5
Push-to-talk (PTT) ................................... 27 Dial a caller ID log entry ............... 41 Turn PTT on or off ............................. 27 Delete caller ID log entries .......... 41 PTT call to a single handset ...........27 Save a caller ID log entry to PTT call to a group of handsets ...28 the directory ...................................... 42 Answer a PTT call .............................. 29 Reasons for missing caller ID Change a one-to-one PTT call information ......
ملخص المحتوى في الصفحة رقم 6
Screen icons ......................................... 60 Handset alert tones .......................... 60 Telephone base tones ..................... 60 Lights ....................................................... 61 Handset display screen messages ... 62 Screen display messages ............... 62 Troubleshooting ....................................... 64 Maintenance............................................... 72 Important safety information ............ 73 Safety information .............
ملخص المحتوى في الصفحة رقم 7
Getting started Quick reference guide - handset pDIR/VOLUME CHARGE indicator Press pDIR to show On when the handset is directory entries (page 34). charging in the telephone base Press to scroll up while or charger. in menus. While entering names or qCID/VOLUME numbers, press to move the Press qCID to show caller ID cursor to the right. history (page 40). Press to increase the listening Press to scroll down while volume when on a call in menus. (p
ملخص المحتوى في الصفحة رقم 8
Getting started Quick reference guide - handset PUSH TO TAL� Press to initiate a one-to-one or one-to-group broadcast (page 27). Press and hold to broadcast to a group of handsets (page 28). Main menu Play messages (page 52) Answering sys (page 44) Main menu Directory (page 31) The > symbol highlights Caller ID log (page 38) a menu item. Intercom (page 25) >Play messages Ringers (page 11) Answering sys p q Set date/time (page 12) Settings (page 13) Websit
ملخص المحتوى في الصفحة رقم 9
Getting started Quick reference guide - telephone base /ANSWER ON X/DELETE Press to delete the Press to turn the built-in answering system on or message currently off (page 45). playing (page 52). Press twice to delete all old messages when Message counter the phone is not in use (page 53). Shows the number of messages or other answering system q/VOL/p information (page 55). During message playback, press to adjust the listening /REPEAT volume (page 52). Press to repeat a message. W
ملخص المحتوى في الصفحة رقم 10
Getting started Installation You must install and See pages 6-7 for charge the battery before STOP! easy instructions. using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 8). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL
ملخص المحتوى في الصفحة رقم 11
Getting started Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 8 for details. Telephone base installation • Plug one end of the telephone line cord into the telephone jack on the back of the telephone base. • Plug the other end • Plug the small end of of the telephone the telephone base line cord into a power adapter into
ملخص المحتوى في الصفحة رقم 12
Getting started Battery installation and charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 79 for battery operating times. If the scr
ملخص المحتوى في الصفحة رقم 13
Getting started Battery installation and charging CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. After you install your telephone or power returns following a SET DATE power outage, the handset will prompt you to set the date and MM/DD/YY time. For instructions, see Set date/time on page 12. To skip p q setting the date and time, press OFF/CANCEL. SET TI
ملخص المحتوى في الصفحة رقم 14
Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate. Tabletop to wall mount installation 1. Plug the power cord and telephone line into the
ملخص المحتوى في الصفحة رقم 15
Getting started Installation options Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Push the telephone base up to detach it from the wall mount bracket. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet. 3. Push the wall mount bracket up to remove it from the wall. 4. See Telephone base and charger installation on page 5. 9
ملخص المحتوى في الصفحة رقم 16
Telephone settings Handset settings Use the menu to change the telephone settings. >Play messages Answering sys 1. Press MENU/SELECT when in idle mode (when the phone is p q not in use) to enter the main menu. 2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item. 3. Press MENU/SELECT to select the highlighted item. NOTE: Press OFF/CANCEL to cancel an operation, back up to the previo
ملخص المحتوى في الصفحة رقم 17
Telephone settings Handset settings Ringer volume You can set the ringer volume level (1-6) to one of six levels or Intercom turn the ringer off. When the ringer is off, appears on the >Ringers screen. p q 1. Press MENU/SELECT in idle mode to enter the main menu. 2. Use qCID or pDIR to scroll to >Ringers, then press MENU/SELECT. >Ringer volume Ringer tone 3. Press MENU/SELECT again to select >Ringer volume. p q 4. Press qCID or pDIR to sample each volume level. 5
ملخص المحتوى في الصفحة رقم 18
Telephone settings Handset settings Set date/time The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and set the d
ملخص المحتوى في الصفحة رقم 19
Telephone settings Handset settings LCD language You can select the language used for all screen displays. >LCD language 1. Press MENU/SELECT in idle mode to enter the main menu. Caller ID annc p 2. Use qCID or pDIR to scroll to >Settings, then press q MENU/SELECT. 3. Press MENU/SELECT to choose >LCD language. LCD LANGUAGE 4. Press qCID or pDIR to highlight >English, >Français >English or >Español. p q 5. Press MENU/SELECT to save your preference. There is a confirmation tone
ملخص المحتوى في الصفحة رقم 20
Telephone settings Handset settings Voicemail (visual message waiting) indicator If you subscribe to a voicemail service offered by your HANDSET 1 telephone service provider, this feature provides a visual New voicemail indication when you have new voicemail messages. New voicemail and the icon appear on the handset screen. AM 2/11 10:21 NOTES: • This feature does not indicate new messages recorded on your phone’s built-in answering system. • For more information about the difference between
