ملخص المحتوى في الصفحة رقم 1
WDECT 2345+1
Corded Telephone and
Digital Answering System
with Wide Band Digital
Cordless Handset
OWNER'S MANUAL
ملخص المحتوى في الصفحة رقم 2
Contents WELCOME/ FEATURES 2 Making Calls Using the Phonebook 45 TERMINOLOGY 4 Speed Dialing 46 CONTROLS & FUNCTIONS 5 Editing or Erasing a Stored Name, Phone Number, DISPLAY AND ICONS 7 Distinctive Ring and Speed Dial 46 SOFT KEY FUNCTION (BASE ONLY) 9 Copying Phonebook Locations 47 GETTING STARTED 10 CALLER ID 49 Setting up the Phone 10 Caller ID and CIDCW Expanding Your Phone 16 (Caller ID on Call Waiting) 49 Register the Handset 17 THE INTEGRATED ANSWERING DEVICE 55 Changing the Digital Secu
ملخص المحتوى في الصفحة رقم 3
Congratulations on your purchase of the Uniden Digital Expandable Cordless Telephone Welcome System! This is a "Corded/Cordless" Telephone unit. The corded handset (on base) can make/ receive calls during power failure. When the base unit is connected to AC power and a telephone line, it can support up to four cordless handsets. You can now place a fully- featured cordless handset anywhere in your home or office where AC power is available to connect the handset chargers. Extra handsets also all
ملخص المحتوى في الصفحة رقم 4
This series features AutoTalk™™ and AutoStandby . AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random Code™ digital security, which automatically selects one of about 130,000 digital security codes for the h
ملخص المحتوى في الصفحة رقم 5
Terminology Standby Mode - The handset maybe sitting on or off the cradle, but is NOT in use. talk/ flash or has not been pressed. The corded base handset is on the base and on the base has not been pressed. No dial tone is present. Talk Mode - The handset is off the cradle and talk/ flash or has been pressed, or pick up the corded base handset and on the base is pressed, enabling a dial tone. [4]
ملخص المحتوى في الصفحة رقم 6
Controls & Functions 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands-Free Speaker 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 9. menu /del Key (P.20 & 41) 10. (ring)/vol / / Key (P.34 & 20) a. ringer volume control b. scroll keys for display screen 11. /tone/ Key (P.36 & 41) 12. redial/pause Key (P.30 & 33) 13. speaker Key (P.30) 14. select / Key (P.20 & 67) 15. call id Key (P.51) 16. talk/flash Key (P.29 & 32) 67 17. end Key (P.31) 18.
ملخص المحتوى في الصفحة رقم 7
23. play/ stop (P. 62) 33.// tone (P. 36 and 41) 41. (speaker) LED (P. 30) 24.In use LED 34. LCD Display 42. mic (microphone) 25.New Message LED 35. Base Antenna 43. / (P. 41) 26. cid/ exit (P. 51) 36. / volume 44. DC IN 9V Jack 27. Corded Base Handset (volume up/ down) 45. TEL LINE Jack 28. Base Speaker (P. 34 and 20) 46. Charging Contacts 29. Curl Cord 37. soft Keys (P. 9) 47. Charge LED 30. delete (P. 64) 38. phonebook (P. 40) 48. DC IN 9V Jack 31. answer on/ off (P. 61) 39. pause/redial (P.3
ملخص المحتوى في الصفحة رقم 8
Display and Icons Example of the standby mode display Handset Day of the week and time/battery icon SUN 12:00A Handset ID and Banner Handset #1 Number of new Caller ID calls received New: 5 Ringer off icon (when the ringer is off) :OFF • Base *Status of your answering machine Day of the week and time **Number of message Number of new Caller ID calls received NEW * appears if you have a new message. ANSWER appears if you turn your answering system off. OFF **FULL appears when the message storag
ملخص المحتوى في الصفحة رقم 9
Talk Mute icon appears when you mute the handset or the base. Talk Speaker icon appears when the handset speaker phone is used. Talk Booster icon appears when the Clarity Booster B feature is in use. Talk Privacy icon appears when the Privacy Mode is turned on. R Talk Record icon appears while recording a conversation. [8]
ملخص المحتوى في الصفحة رقم 10
Soft Key Function (Base only) "Soft" keys are keys that change function during the operation of the phone. There are three soft keys on the base. Soft keys allow you to: Access the main menu Find a handset Record Voice Memo The function of each soft key is determined by the icon that appears directly above it. Complete information on the features controlled by the soft keys can be found under each feature. In standby mode Base SUN 12:00A New CID: 5 FIND HS RECORD MENU Base (speaker phone)
ملخص المحتوى في الصفحة رقم 11
GETTING STARTED Setting up the Phone Do the following steps: A. Choose the best location B. Connect the base unit C. Install the rechargeable battery pack into the handset If your home has D. Connect the charger specially wired E. Mount the base unit on a wall alarm equipment connected to the phone line, be A. Choose the best location sure that Here are some important guidelines you should consider: installing the system does not disable your alarm equipment. Avoid heat sources, such as Avoid
ملخص المحتوى في الصفحة رقم 12
B. Connect the base unit 1) Connect the handset cord to the left side of the phone and the corded base handset. 2) Connect the telephone line cord to the TEL LINE Jack Use only the Test Telephone Line Without Power supplied [AAD- Pick up the base handset and listen for a dial tone. 041S] AC Adaptor. Do not If a dial tone is achieved after 2 seconds then base use any other AC handset can be used during a power failure. adaptor. If there is no dial tone your telephone may be on a long line Do
ملخص المحتوى في الصفحة رقم 13
GETTING STARTED C. Install the rechargeable battery pack into the handset 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. Use only the Uniden (BT- 446) 2) Plug the battery pack connector (red & black rechargeable wires) into the jack inside the battery battery pack compartment. (The connector notches fit into the supplied with your cordless grooves of the jack only one way.) Match the telephone. wire colors to
ملخص المحتوى في الصفحة رقم 14
D. Connect the charger The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger. 1) Connect the AC adaptor to the DC IN Use only the supplied 9V jack and to a standard 240V AC wall [AAD-600s] AC outlet. adaptor. Do not use any other AC adaptor. 2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. 3) Make sure that the charge LED illuminates. If the LED does not
ملخص المحتوى في الصفحة رقم 15
GETTING STARTED E. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Detach the wall mount adaptor from the bottom of the base. 2) Snap the wall mount adaptor into the notches on the base bottom as shown. 3) Plug the AC adaptor into the DC IN 9V jack. Wrap the AC adaptor cord inside the molded wiring channel as shown. 4) Plug the AC adaptor into a standard 240V AC wall outlet. 5) Plug the telephone line cord into the TEL LINE jack
ملخص المحتوى في الصفحة رقم 16
Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 1.5m of a working phone jack to avoid excessive lengths. Make sure the wall material is capable of supporting the weight of the base and handset. Use #10 screws (minimum
ملخص المحتوى في الصفحة رقم 17
GETTING STARTED Expanding Your Phone Four Handset Expandability Your phone supports up to four handsets, including any handsets supplied with your phone. You can now place a fully- featured cordless handset anywhere AC power is available to connect the handset charger. Handsets can be used in DirectLink Mode or on an intercom call without interfering with incoming calls. It is possible to have a 4- way conference among the base, two handsets, and one outside line. All of the handsets ring when a
ملخص المحتوى في الصفحة رقم 18
Register the Handset If you purchase an expansion handset (WDECT2305 model), you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When Your phone may charged, pre-registered handsets display a handset ID number. Handsets that be compatible have not been registered display Place handset on main base to register. When with other you register an extra handset to the base, the handset
ملخص المحتوى في الصفحة رقم 19
GETTING STARTED Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: If you have more than one 1. De- register the Handset (see page 28). handset, de- 2. Re- register each handset by following the steps on page
ملخص المحتوى في الصفحة رقم 20
Main Menu Options Your phone has seven main menu options: DirectLink Mode, Room/ Baby Monitor, Handset Setup, Base Setup, Answ. Setup, System Reset (Handset only), Handset Registration(Base only) and Global Setup . You can change Room/ Baby Monitor, Answ. Setup , and Global Setup settings from the base or from any handset. For Global DirectLink Mode, Handset Setup and System Reset-Replacing Base are only available Setup, Answ. from a handset. Base Setup is only available from the base. Setup,
