ملخص المحتوى في الصفحة رقم 1
Preparation Basic Operation Advanced Operation Useful Information
2.4GHz Digital Cordless Phone
Model No. KX-TG2650ALN
KX-TG2650NZN
Operating Instructions
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 8 hours before initial use.
ملخص المحتوى في الصفحة رقم 2
Before Initial Use Thank you for purchasing your new Panasonic cordless telephone. For Australia When you subscribe to Caller ID services from your telephone operator, this telephone will display the caller’s phone number. When available from your telephone operator, this telephone will also display the number of the second call or call waiting. For New Zealand Caller ID, where available, is a service provided by the telephone company. After subscribing to Caller ID, this phone will display a ca
ملخص المحتوى في الصفحة رقم 3
For Best Performance Battery Charge The battery is beneath A rechargeable Nickel-Metal Hydride this cover. (Ni-MH) battery powers the handset. Charge the battery for about 8 hours before initial use (p. 11). •Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. Base Unit Location/Noise Calls are transmitted between the base unit and the
ملخص المحتوى في الصفحة رقم 4
Contents Preparation Location of Controls...................................................................... 6 Displays .......................................................................................... 9 Settings...........................................................................................10 Connections..................................................................................10 Battery Charge .......................................................................
ملخص المحتوى في الصفحة رقم 5
Preparation Basic Operation Advanced Operation Useful Information Intercom..........................................................................................44 Transferring a Call Using the Intercom ........................................45 Special Features ............................................................................46 Automatic Security Code Setting..................................................46 How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service
ملخص المحتوى في الصفحة رقم 6
Location of Controls Base unit Antennas (p. 3, 10) (LOCATOR/INTERCOM) Button (p. 44) Display (p. 9, 54) Charge Contacts (p. 12) Speaker (p. 20) (PAUSE) Button (p. 46) (REDIAL) Button (p. 21) (HOLD) Button (p. 21) MIC (Microphone) (p. 20, 23, 44) DIGITAL SP-PHONE (Speakerphone) /HEADSET Button and Indicator (p. 20, 23, 50) 6 D DIGITAL SPREAD SPECTRUM IGITAL SPREAD SPECTRUM LOUD LOUD S SE EAR RC CH R RECALL ECALL PAUSE PAUSE C CLEAR LEAR CALLER ID CALLER ID R RINGER INGER EDIT EXIT LOCATOR INT
ملخص المحتوى في الصفحة رقم 7
Preparation LOUD LOUD REDIAL REDIAL PAUSE PAUSE CLEAR CLEAR SE SEARC RCH CALLER ID CALLER ID RINGER RINGER EXIT EXIT EDIT EDIT L LOC OCAT TOR OR INTERCOM ERCOM REDIAL REDIAL H HOLD OLD HEADSET HEADSET MIC DIGITAL SPREAD SPECTRUM DIGITAL SPREAD SPECTRUM (RECALL) Button (p. 47, 48) (CLEAR) Button (p. 32, 43) CALLER ID Indicator (p. 25) Headset Jack (p. 50) Navigator Key ( , , , ) (RINGER) Button (p. 16) (p. 21, 26, 40) (EDIT) Button (p. 30) (EXIT) Button (p. 26, 41) 7 E N O H
ملخص المحتوى في الصفحة رقم 8
Location of Controls Handset Ringer/Charge Antenna (extendable) Indicator (p. 11, 35) (p. 17, 19) Back side Receiver (p. 17) Speaker Display (p. 9, 54) (p. 17) (DIRECT) Button (p. 33, 34) (FUNCTION/CH) (Channel) (INTERCOM) Button Button (p. 14, 19, 36) (p. 44) Headset Jack (p. 49) (OFF) Button (p. 14, 17, 26, 41) (Talk) Button (p. 17, 23) (CLEAR) Button (p. 32, 38, 43) (Speakerphone) Button (p. 18, 23) (REDIAL/PAUSE) Button Navigator Key (p. 19, 46) ( , ,
ملخص المحتوى في الصفحة رقم 9
Preparation Displays Handset #The display shows the dialled number, call status, programming options and # 0 new call directory items etc. If you subscribe to a Caller ID service, caller information will be displayed (p. 24). The number of new $ % calls will also be displayed. $The directory icon displays when storing or viewing the directory items (p. 36, 40). %The battery icon indicates the battery strength (p. 11). Standby mode: While the handset is off the base unit, the handset goes into th
ملخص المحتوى في الصفحة رقم 10
Settings Connections Raise the antennas. Fasten the AC adaptor cord to prevent it from being disconnected. Hook To Power Outlet (AC 230 V–240 V, 50 Hz) AC Adaptor For Australia To Socket Telephone Line Cord Telephone Plug For New Zealand To Single-Line Telephone Jack Telephone Line Cord •USE ONLY WITH Panasonic AC ADAPTOR PQLV10AL. •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, se
ملخص المحتوى في الصفحة رقم 11
Preparation Battery Charge Insert the handset in the cradle. The ringer/charge indicator will light and a beep will sound. Charge for about 8 hours before initial use. •If the battery has been fully charged, the ringer/charge indicator light will turn from Ringer/Charge red to green. Indicator •If you use the handset for a few minutes, the ringer/charge indicator light will stay red for a while even if the battery is fully charged. This is normal. Battery strength You can check the battery stre
ملخص المحتوى في الصفحة رقم 12
Settings Recharge Recharge battery Recharge the battery when: —“Recharge battery” is displayed on the handset, —“ ” flashes on the display, or —the handset beeps intermittently while it is in use. •If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating “Recharge battery” and/or “” will continue to flash. •To fully recharge the battery, the handset should be left on the base unit for 8 hours. Battery information After your Panasonic battery is fully c
ملخص المحتوى في الصفحة رقم 13
Preparation Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not function (p. 47). Your phone comes from the factory set to “A”. Use the handset near the base unit. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH). HSave directory 1 Ringer volume GF H=Yes Press Ö or Ñ repeatedly until the arrow HProgram 2 points to “Program”. GF H=Yes Press á (Yes key). HSave DIRECT# Set r
ملخص المحتوى في الصفحة رقم 14
Programmable Functions You can program the following functions by using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH). * HSave directory To store an item in the directory (p. 36). Ringer volume To select the handset ringer volume (p. 16). Program Press á. * HSave DIRECT# To store a phone number in the DIRECT but
ملخص المحتوى في الصفحة رقم 15
Preparation Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing or . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH). 1 Press Ö or Ñ repeatedly until the arrow HProgram 2 points to “Program”. GF H=Yes Press á (Yes key). 3 Press Ö or Ñ repeatedly until the arrow Set line mod
ملخص المحتوى في الصفحة رقم 16
Programmable Functions Selecting the Ringer Volume You can set the handset and base unit ringer volumes to HIGH, LOW or OFF. If set to OFF, the handset/base unit will not ring. Your phone comes from the factory set to HIGH. Handset ringer volume Make sure the unit is in the standby mode initially. Press (FUNCTION/CH). 1 Save directory Press Ö or Ñ repeatedly until the HRinger volume 2 arrow points to “Ringer volume”, GF H=Yes and press á (Yes key). Ringer Press Ö or Ñ to select the desired HIGH
ملخص المحتوى في الصفحة رقم 17
Basic Operation Making Calls With the Handset For best performance, Back side extend the antenna fully (p. 8). Receiver Speaker (FUNCTION/CH) (OFF) (CLEAR) Microphone (REDIAL/PAUSE) Press . Talk 1 Dial a phone number. Talk 2 •The dialled number is displayed. 0111112222 •After a few seconds, the display will show the length of the call and the battery strength. Talk 00-00-00 To hang up, press (OFF) or place the Off 3 handset on the base unit. 00-01-20 •If the handset has lost communication wit
ملخص المحتوى في الصفحة رقم 18
Making Calls To have a hands-free phone conversation (Using Digital Duplex Speakerphone) Talk Press . 1 •The button lights. Dial a phone number. Talk 2 •The dialled number is displayed. •After a few seconds, the display will show the 0111112222 length of the call and the battery strength. Talk When the other party answers, talk into the 3 microphone. 00-00-00 To hang up, press (OFF) or place the Off 4 handset on the base unit. •The button light goes out. 00-01-20 •If the handset has lost commun
ملخص المحتوى في الصفحة رقم 19
Basic Operation If noise interferes with the conversation Extend the antenna fully, press (FUNCTION/CH) to select a clearer channel or move closer to the base unit. To redial the last number dialled on the handset Press or and press (REDIAL/PAUSE). To dial after confirming the entered number Dial a phone number. 1 •If you misdial, press (CLEAR) and dial again. 0111112222 Press . Talk 2 OR To have a hands-free phone conversation, 0111112222 press , and when the other party Talk answers talk into t
ملخص المحتوى في الصفحة رقم 20
Making Calls With the Base Unit (Digital Duplex Speakerphone) Speaker (REDIAL) MIC (DIGITAL!SP-PHONE) (HOLD) and Indicator Press (DIGITAL!SP-PHONE). Talk 1 •The DIGITAL SP-PHONE indicator lights. Dial a telephone number. Talk 2 0111112222 When the other party answers, Talk 3 talk into the MIC (microphone). 00-00-00 To hang up, press (DIGITAL!SP-PHONE). Off 4 •The indicator light goes out. 00-02-10 •To switch to the handset while using the base unit speakerphone: —If the handset is off the base
