ملخص المحتوى في الصفحة رقم 1
Big Button Plus 20200
Congratulations on your selection of the Big Button Plus 20200
from Northwestern Bell Phones. This quality telephone, like all
®
Genuine BELL products, has been designed to give you many
years of continuous service and represents the best value for
your money. It requires little maintenance and is easy to setup
and operate.
1 07069A
OWNER’S MANUAL # 20200 ver. 07069A
Page: 1 ENGL
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at: http://www.
ملخص المحتوى في الصفحة رقم 3
short out parts that could result in a risk SAVE THESE INSTRUCTIONS of fire or electric shock. Never spill liquid of any kind on the product. IMPORTANT SAFETY 11. To reduce the risk of electric shock, do INSTRUCTIONS not disassemble this product, but take it to a qualified service contractor when W hen using your telephone equipment, basic some service or repair work is required. safety precautions should always be followed to reduce the risk of fire, electric Opening or removing
ملخص المحتوى في الصفحة رقم 4
2. Your phone should be situated away to your line, as determined by the REN, from heat sources such as radiators, you should call your local telephone heaters, stoves or any other appliance company to determine the maximum that produces heat. REN for your calling area. 4. If your telephone causes harm to the telephone network, the telephone INSTALLATION company may discontinue your service PRECAUTIONS temporarily. If possible, they will notify you in ad
ملخص المحتوى في الصفحة رقم 5
Big Button Plus 20200 CONTROLS DIAGRAM Emergency Handset Buttons (Fire, Medical Handset & Police) Retainer Tab STORE Telephone Button Line Jack (Located on rear) TONE ∴ Button Visual Ring Indicator RINGER VOLUME Control TONE/PULSE Switch RINGER TONE Control HANDSET VOLUME Control SPEAKER Button FLASH Button MEMORY Button HOLD Button w/LED
ملخص المحتوى في الصفحة رقم 6
RINGER TONE Control - Used to DESCRIPTIONS adjust the ringer tone. Emergency Buttons - Allows you to one-touch dial for any of three (3) RINGER VOLUME Control - Used to emergency numbers. adjust the ringer volume. FLASH Button - Momentarily hangs up STORE Button- Used to store a phone the phone to access custom calling number (up to 16 digits each) into one of features such as Call Waiting or Three- the 10 available memory locations and 3 Way Calling provided by your local
ملخص المحتوى في الصفحة رقم 7
Handset Retainer Tab Installation INSTALLATION If the base unit is to be placed in the wall Desktop Use mount position, the handset retainer tab 1. Set the unit on the selected desktop must be pulled out, turned around and and connect the telephone line cord placed in the opposite direction, so that to the telephone line jack on the rear the tab allows the handset to hang onto of the base unit. the base unit, as shown in figure 2 2. Connect the opposite end of telephone line cord
ملخص المحتوى في الصفحة رقم 8
ringer setting so you will not miss any Flash incoming calls. Pressing this button momentarily hangs up the phone to access custom calling Adjusting the Ringer Tone features such as Call Waiting or Three- You can adjust the ringer tone by Way Calling provided by your local rotating the RINGER TONE control phone company. For other Custom located on the side of the unit. Calling features, refer to the instructions provided by your local phone company. Handset Receiver Volume Incre
ملخص المحتوى في الصفحة رقم 9
To Program the 3 Emergency memory (The telephone number Numbers will not dial out). 1. Lift the handset and listen for a dial 4. Press and release the STORE tone. button. 2. Press and release STORE 5. Press a one-digit number ( 0 - 9) on BUTTON. the keypad to store the phone 3. Enter the number to be stored. (The number into the desired memory telephone number will not dial out.) location. 4. Press and release the STORE 6. Hang up the phone by returning the BUTTON. handset to the h
ملخص المحتوى في الصفحة رقم 10
Ringer Equivalence Number (REN) - those devices ring when you receive a A number located underneath the base of call. In most areas, but not all areas, the your phone(s) or phone-related device. REN total of all devices should not The REN is used to determine how exceed five (5). Call your local phone many phones can be connected to the company to determine the maximum same telephone line while still having all REN for your calling area. 07069A
ملخص المحتوى في الصفحة رقم 11
TROUBLESHOOTING SYMPTOM SOLUTION No dial tone • The handset cord or telephone line cord may be loose at the connections. Push in firmly at both ends to establish good contacts. • Test the phone at a different telephone wall jack and listen for a dial tone. • Test a different phone in the wall jack and listen for a dial tone. Will not ring • The phone or another phone connected to the same line may be in the off-hook (in-use) position. Place the phone in the on-hook (hung-up
ملخص المحتوى في الصفحة رقم 12
Distributed Exclusively Worldwide by Unical Enterprises, Inc., Industry, California, USA 20200X/07069A 07069A 12 OWNER’S MANUAL # 20200 ver. 07069A Page: 12 ENGLISH VERSION
