ملخص المحتوى في الصفحة رقم 1
SIRIUS Satellite Radio
User Manual
ملخص المحتوى في الصفحة رقم 2
Thank you for purchasing this product. Please read this user’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ................................................................................................................... 1 2. PRECAUTIONS .................................
ملخص المحتوى في الصفحة رقم 3
2. PRECAUTIONS 1. Upon initial startup or when starting This equipment has been tested to comply after turning off the backup power with the limits for a Class B digital device, supply, the receiver will take longer to pursuant to Part 15 of the FCC Rules. play audio and may take up to 30 These limits are designed to provide seconds after reception of the SIRIUS reasonable protection against harmful signal before audio is heard. interference in a residential installation. 2. Channel names
ملخص المحتوى في الصفحة رقم 4
SIRIUS employs S>PLEX technology (statistical multiplexing), which optimizes the fidelity on each channel What is SIRIUS Satellite to give you superior digital sound. So Radio? rock really soars, jazz really jams and country really sings. Over 100 streams of the best in-car entertainment and completely Once you experience over 100 commercial-free music streams of digital entertainment, you’ll Only SIRIUS has 60 original music never want to leave your car. For more stre
ملخص المحتوى في الصفحة رقم 5
3. INSTALLATION AND WIRING CONNECTIONS Before Installation 1. Before starting, be sure to disconnect the battery’s negative “–” terminal to prevent accidents due to short-circuits. 2. Location – Consider safety and operability when selecting a place for installation. Avoid the following. • Locations where the unit will hamper or interfere with driving. • Locations where the unit could injure passengers if the car stops suddenly. • Locations exposed to direct sunlight or hot air fr
ملخص المحتوى في الصفحة رقم 6
Installation Example (Installing the unit under the driver’s seat) 1. Attach the mounting brackets to the sides of the SIR-CL1 using the screws provided. 2. Select the location on the floor mat. Drill holes in the floor mat to match the positions of the holes in the mounting brackets . 3. Insert the canoe clips from the rear of the floor mat and install the SIR-CL1. There are three mounting holes on each side of the SIR-CL1. Select the appropriate holes to match to the installation l
ملخص المحتوى في الصفحة رقم 7
How to Connect 1. CeNET Cable Orient the CeNET cable in the direction shown in the figure and insert it until it is locked in position. To remove the CeNET cable, pull it by lightly grasping the slide cap in your fingers. 2. SIRIUS antenna Make sure power is “Off”. Connect a SIRIUS antenna (sold separately) to the SIRIUS antenna terminal and press until locking tab engages. To disconnect, make sure power is “Off”, then press the rear of the locking tab to rele
ملخص المحتوى في الصفحة رقم 8
4. SYSTEM EXAMPLES Example 1 Main unit compatible with CeNET SIR-CL1 to the main unit. connection CeNET cable (provided with the CD CD changer compatible with CeNET changer) connection SIRIUS antenna (sold separately) CeNET cable (provided with the Front speakers SIR-CL1) Rear speakers Using this cable, connect the 7
ملخص المحتوى في الصفحة رقم 9
Example 2 SIRIUS controller (DSC920S, sold RCA pin (audio) cable (sold separately) separately) Connection cable (provided with the SIRIUS antenna (sold separately) DSC920S) Front speakers Audio systems with auxiliary or line-in connections 8
ملخص المحتوى في الصفحة رقم 10
5. CONTROLS Source unit buttons, example 1 Source unit buttons, example 2 Notes: The illustrations show examples of two headunits with button functions. Since this manual covers several models, the names of some buttons vary by model. As shown below, this manual gives different button names when more than one name is used. [FNC] (FUNC) button, [SC] (SCN) button etc. 9
ملخص المحتوى في الصفحة رقم 11
Display Items Source unit display, example 1 Source unit display, example 2 10
ملخص المحتوى في الصفحة رقم 12
6. SIRIUS OPERATION Selecting SIRIUSSIRIUS SATELLITE RADIO modes Press the [SAT] button or the [FNC] (FUNC) button to select the SIRIUS mode. The SIRIUS indication lights up when SIRIUS mode is selected. Notes: • The [SAT] button selects the SIRIUS mode directly. Some head units do not have a [SAT] button. If not, press the [FNC] (FUNC) button until SIRIUS is selected. • The [FNC] (FUNC) button selects the external devices connected to the source unit in order, for example: AM/FM mode D
ملخص المحتوى في الصفحة رقم 13
• The [ADJ] button is described in the source unit instruction manual either as the [T] (TITLE) button or [A-M] button. This refers to the function of the button labeled “ADJ” on the source unit panel. Channel selection Channels are selected with the following buttons. • The or button (Seek Tuning) • A [DIRECT] button • The [SCN] (SC) button • The [CAT] (RDM) button For details, see the following operation descriptions. Notes: The audio output is muted and other button ope
ملخص المحتوى في الصفحة رقم 14
Notes: • When the name of a channel stored in memory is changed by SIRIUS, the display will show the new channel name immediately. It will not be removed from the preset channel location. • A channel stored in memory may be discontinued at the option of SIRIUS. If you attempt to access this channel from the preset location, the receiver will give you the “INVALID CH” or “INVLD CH” response. At that time, you may select another station to store in memory. Category selection function S
ملخص المحتوى في الصفحة رقم 15
Scan function There are two scan modes: a category scan mode and a preset scan mode. During scanning, channels are displayed in abbreviated form and the display mode cannot be switched. Category scanning In a category scan, broadcast channels in the same category as the current channel are selected about every 10 seconds. 1. Press the [SCN] (SC) button to start a category scan. 2. Press the [SCN] (SC) button, a [DIRECT] button, the or button to cancel a category scan. Note: • Categ
ملخص المحتوى في الصفحة رقم 16
7. SPECIFICATIONS Receiving Frequencies Satellite 2322.293/2330.207 MHZ Terrestrial 2326.250 MHZ Power Power supply (Stand-alone 4-pin input jack for power and ground mode only) Power consumption Less than 1A Physical Interface Commander 8-pin connector Antenna K-code FAKRA SMB connector CeNET connector Two 13-pin jacks for CeNET compatible Clarion head units or CD Changers Audio output 1 pair of gold-plated RCA jacks Mode switch Stand alone/ CeNET mode selectable Mechanical
