ملخص المحتوى في الصفحة رقم 1
21015
2.4 GHz Dual Cordless Handset
Call Waiting Caller ID Speakerphone
User’s Guide
We bring good things to life.
ملخص المحتوى في الصفحة رقم 2
IMPORTANT INFORMATION NOTICE: This product meets the applicable Industry Canada technical specifications. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or eq
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS TELEPHONE OPERATION ....................... 20 IMPORTANT INFORMATION ....................... 2 SPEAKERPHONE .............................. 20 FCC RF RADIATION EXPOSURE CHARGE/PAGE INDICATOR ................. 21 STATEMENT .................................. 2 MAKING CALLS WITH THE HANDSET.... 21 HEARING AID COMPATIBILITY (HAC) ........ 2 MAKING CALLS WITH THE INTRODUCTION ..................................... 5 SPEAKERPHONE .............................. 21 HANDSET AND CHARGE CRA
ملخص المحتوى في الصفحة رقم 4
INTERCOM ......................................... 27 RECEIVING AND STORING MAKING AN INTERCOM CALL ............. 27 CID RECORDS ................................ 35 RECEIVING AN INTERCOM CALL ... 28 REVIEWING CID RECORDS ................ 36 RECEIVING AN EXTERNAL TELEPHONE TRANSFERRING CID RECORDS CALL DURING AN INTERCOM CALL ..... 28 TO MEMORY................................... 36 BETWEEN HANDSETS ................ 28 DIALING A CID NUMBER .................. 37 BETWEEN BASE AND HANDSET .. 28 DELET
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on purchasing this GE Dual Cordless Handset Telephone System. This system operates in the 2.4 GHz frequency range, and is unique to conventional cordless telephones. When the base is connected to electrical power and a telephone line, it can support up to
ملخص المحتوى في الصفحة رقم 6
Your Caller ID Call Waiting phone allows you to: •View the name and telephone number of a caller while you are on the phone (Call Waiting Caller ID). • Identify callers before you answer the phone. •View the time and date of each incoming call. •Record up to 40 Caller ID messages sequentially in each handset and the base. • Know who called while you are on the other line or when you were away. •Screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answering a
ملخص المحتوى في الصفحة رقم 7
p c d l t a a e r r i o l e i o h d n m e k c g g n a t s b t r l l f e a redial a . c e e mute mute n c e r HANDSET AND CHARGE CRADLE LAYOUT program/ Display mute button AC power supply mem button format/ conference exit button button handset charge cradle mem TALK/callback cid/vol v format button TALK button v page ringer flash/ redial def 1 abc 3 2 delete button 4 ghi jkl mno 6 5 charge button wxyz 7 pqrs tuv 8 9 tone pause oper # * 0 page/int ringer button button charge indicator # pause but
ملخص المحتوى في الصفحة رقم 8
p p c d l t a r r a e r i o l e i i o o h d n n m e k k c c g g g a t a t n s b b t r r l l l l f e e a redial a redial a a . c c e e mute mute mute n n c c e e r r BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the items shown here. program mem v v mem mem CID def v format v 1 2 abc 3 format TALK v TALK v v ghi mno 4 5 jkl 6 page ringer volume page ringer v wxyz abc def 1 2 abc 3 def 7 pqrs 8 tuv 9 1 2 3 4 ghi jkl 6 mno pause 4 ghi 5 jkl 6 mno 5 charge/page * tone 0 oper # pqr
ملخص المحتوى في الصفحة رقم 9
INSTALLATION INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not prop
ملخص المحتوى في الصفحة رقم 10
INSTALLING THE PHONE 1. Choose an area near an electrical outlet and telephone wall jack (RJ11C). Your phone should be placed on a level surface, such as a table top or desk. charge 2. Plug the AC power supply into an electrical outlet and the DC connector into the back of the base. CAUTION: Use only the ATLINKS USA, Inc. power supply, 5-2621 (white) or 5-2596 (black), that came with this unit. Using other power supplies may damage the unit. 3. Plug the handset charge cradle's AC power supply i
ملخص المحتوى في الصفحة رقم 11
5. Place one handset in the base cradle and the other handset in the charge cradle. 6. Allow the handsets to charge for 16 hours prior to first use. If you don't properly charge the handsets, battery performance is compromised. 7. On the base, plug the one end of the telephone line cord into the jack on the back of the base and the other end into a telephone wall jack. WALL MOUNTING THE BASE NOTE: For best results, leave the phone on a flat surface during initial charging before you hang the pho
ملخص المحتوى في الصفحة رقم 12
LANGUAGE This setting may be made with the handset and the base. 1. Press the program/mute button and SET LANGUAGE 1ENG 2 FRA 3ESP shows in the display. 2. Use the touch-tone pad on your handset or base to select 1ENG, 2FRA, or 3ESP, or use the or buttons on the handset or the base to select 1ENG, 2 FRA, or 3ESP. English is the default setting. SET LANGUAGE 1 ENG 2 FRA 3 ESP 3. Press the program/mute to save. You will hear a confirmation tone, and the selected language displays for two
ملخص المحتوى في الصفحة رقم 13
HANDSET NAME This setting may be made with the handset only. 1. Use the touch-tone pad to enter the name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B. The cursor moves to the next field. Press the 4 key 3 times for the letter I. The cursor moves to the next. Press the 5 key 3 times for the letter L. The cursor moves to the next field. Press the 5 key 3 times for the second lette
ملخص المحتوى في الصفحة رقم 14
2. Press the program/mute button to save. You will hear a confirmation tone, and the selected contrast level displays for two seconds, then SET AREA CODE shows in the display. SET AREA CODE - - - NOTE: Press the EXIT button once to keep the previous setting and return to standby mode. AREA CODE If you enter a 3-digit area code in the area code menu, your local area code does not appear in Caller ID records. Instead, you see only the local seven digit number. Calls you receive from outside y
ملخص المحتوى في الصفحة رقم 15
RINGER TONE This setting may be made with the handset and base. You may choose from six different ringer tones. 1. Use the touch-tone pad on your handset or base to select 1, 2, 3, 4, 5, 6 or use the or buttons on the handset or the base to select 1, 2, 3, 4, 5 or 6 . The default setting is 1. NOTE: When you use the handset or base to set a ringer tone, the ringer tone plays after you make your selection. 2. Press the program/mute button to save. You will hear a confirmation tone, and the ri
ملخص المحتوى في الصفحة رقم 16
TONE/PULSE Most telephone systems use tone dialing, however, some may still use pulse (rotary) dialing. Depending on your telephone system, set the dialing mode as follows: This setting may be made with the base only. 1. Use the touch-tone pad on the base to select 1TONE or 2PULSE, or use the or button to select 1TONE or 2PULSE. The default setting is 1. 2. Press the program/mute button to save. You will hear a confirmation tone, the selected dialing mode displays for two seconds, and SET TI
ملخص المحتوى في الصفحة رقم 17
12;34 PM DEFAULT SETTING 1 YES 2NO NOTE : The time of day is automatically updated when the first valid Caller ID record is received. DEFAULT As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings. This setting can be made with handset and base. 1. Use the touch-tone pad on your handset or base to select 1YES or 2NO, or use the or button on your base or handset to select 1YES or 2
ملخص المحتوى في الصفحة رقم 18
This setting may be made with the handset only. During the registration process, keep your handset near the base. Make sure your phone is OFF (not in talk mode). 1. Press the program/mute button until REGISTRATION 1YES 2NO shows in the display. REGISTRATION 1 YES 2NO 2. Use the touch-tone pad to select 1YES or 2NO, or use the or button to select 1YES or 2NO. The default setting is 2NO. 3. If you choose 1 YES: a. Press the program/mute button and HOLD, BASE PAGE WAIT FOR BEEP shows in
ملخص المحتوى في الصفحة رقم 19
NOTE : For more information on naming a handset, refer to the Handset Name section of this manual. HANDSET DE-REGISTRATION This setting may be made with the handset only. Deregistration cancels a handset’s registration. During the de-registration process, keep the handset near the base. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-regis
ملخص المحتوى في الصفحة رقم 20
4. Use the touch-tone pad or or button to scroll to your selection. If you choose 1 YES, press the program/mute button to confirm. Then DE- REGISTER......... shows in the display. When de-registration is complete, HANDSET # DEREGISTERED displays for two seconds and then HANDSET NEEDS REGISTRATION shows in the display. You will hear a confirmation tone. HANDSET NEEDS REGISTRATION NOTE: Press the EXIT button once to keep the previous setting and return to the standby mode. TELEPHONE OPERATION
