ملخص المحتوى في الصفحة رقم 1
8 ports 10/100Mbps
+ 2 ports 10/100/1000Mbps
Gigabit Ethernet Desktop Switch Layer 2
USER’S GUIDE
ملخص المحتوى في الصفحة رقم 2
The Atlantis Land logo is a registered trademark of Atlants Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc
ملخص المحتوى في الصفحة رقم 3
T C ABLE OF ONTENTS ABOUT THIS GUIDE ....................................................... 1 TERMS .............................................................................................. 1 OVERVIEW OF THIS USER’S GUIDE ................................................... 1 INTRODUCTION................................................................. 2 G E T ................................................... 2 IGABIT THERNET ECHNOLOGY FAST ETHERNET TECHNOLOGY...................
ملخص المحتوى في الصفحة رقم 4
ملخص المحتوى في الصفحة رقم 5
ABOUT THIS GUIDE This user’s guide tells you how to install your 10-port 10/100/1000Mbps Gigabit Ethernet Switch, how to connect it to your network. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the 10-port 10/100/1000Mbps Gigabit Ethernet Switch, and “switch” (first letter lower case) to refer to all Ethernet switches, including the 10-port 10/100/1000Mbps Gigabit Ethernet Switch. Overview of this User’s Guide ♦ Introduction.
ملخص المحتوى في الصفحة رقم 6
INTRODUCTION This section describes the features of the 10-port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over 1
ملخص المحتوى في الصفحة رقم 7
to perform 10 times the number of operations in the same amount of time. In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage of today and tomorrow’s rapidly improving switching and routing internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigabit Ethernet to eventually operate over unshielded twisted-pair (UTP) cabling, outf
ملخص المحتوى في الصفحة رقم 8
environments, it provides a straightforward upgrade and takes advantage of the existing investment in hardware, software, and personnel training. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total netwo
ملخص المحتوى في الصفحة رقم 9
Features The 10-port 10/100/1000Mbps Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. Switch features include: Ports ♦ Two 10/100/1000Mbps Gigabit Ethernet port (port 9 ~ 10). ♦ Eight 10/100Mbps Fast Ethernet ports (port 1 ~ 8). Performance features ♦ Store and forward switching scheme capability to support rate adaptation and protocol conversion. ♦ Full duple
ملخص المحتوى في الصفحة رقم 10
UNPACKING AND SETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One 10-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four rubber feet with adhesive backing ♦ One AC power cord ♦ This User’s Guide (on CD-Rom) If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the
ملخص المحتوى في الصفحة رقم 11
♦ Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the objects around it. Figure 2-1. Gigabit Ethernet Switch installed on a
ملخص المحتوى في الصفحة رقم 12
Rack Installation (optional) The 10-port 10/100/1000Mbps Gigabit Ethernet Switch can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets on the switch’s front panel (one on each side) and secure them with the screws provided. Figure 2- 2A. Attaching the mounting brackets to the Switch Then, use the screws provided with the equipment rack to mount the Switch in the rack. Figure 2-2
ملخص المحتوى في الصفحة رقم 13
Connecting Network Cable The Gigabit Ethernet Switch supports two 10/100/1000Mbps Gigabit Ethernet ports and eight 10/100Mbps Fast Ethernet ports. Port 1 to port 8 supports 10Mbps Ethernet or 100Mbps Fast Ethernet. Port 9 to port 10 are Gigabit Ethernet port, it supports 10Mbps, 100Mbps and 1000Mbps. And these ports runs both half duplex and full duplex while it’s running in 10Mbps, 100Mbps or 1000Mbps. These ports are Auto-MDI type port, these ports can auto transform to MDI-II or MDI
ملخص المحتوى في الصفحة رقم 14
IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The front panel of the Switch consists of 8 10/100Mbps Ethernet ports, 2 10/100/1000Mbps Gigabit Ethernet port, and LED indicators. Figure 3-1. Front panel view of the 10-port 10/100Mbps Gigabit Ethernet Switch Two 10/100/1000Mbps Gigabit Ethernet ports (port 9 ~10). ♦ ♦ Eight 10/100Mbps Fast Ethernet ports (port 1 ~ 8). ♦ Comprehensive LED indicators th
ملخص المحتوى في الصفحة رقم 15
Rear Panel The rear panel of the Switch consists of an AC power connector. The following shows the rear panel of the Switch. Figure 3-2. Rear panel view of the 10-port 10/100/1000Mbps Gigabit Ethernet Switch AC Power Connector This is a three-pronged connector that ♦ supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz. LED Indicator
ملخص المحتوى في الصفحة رقم 16
Figure 3-4. The 10-port 10/100/1000Mbps Gigabit Ethernet Switch LED indicators POWER ♦ After turning on the power, the Power indicator on the front panel should light to indicate the Switch is receiving power. ♦ SPEED The indicator lights amber when the port is connected to 1000Mbps Gigabit Ethernet station, and the indicator lights green when the port is connected to 100Mbps Fast Ethernet station. Otherwise, this indicator remains off when the port is connected to a 10Mbps Eth
ملخص المحتوى في الصفحة رقم 17
Product Support If you continue to have problems you should contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: AtlantisLand spa Via Gandhi 5 Ing2,Scala A 20017 Mazzo di Rho(MI) Tel: 02/93906085, 02/93907634(help desk) Fax: 02/93906161 Email: info@atlantisland.it or tecnici@atlantisland.it WWW: http://www.atlantisland.it or www.atlantis-land.com T
ملخص المحتوى في الصفحة رقم 18
General IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Standards: IEEE 802.3z 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 Auto-negotiation IEEE 802.3x Full duplex Flow Control Protocol: CSMA/CD Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) Data Transfer Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) Rate: Gigabit Ethernet: 1000 Mbps (half-duplex), 2000 Mbps (full-duplex) Topology Star Ethernet: 2-pair UTP Cat. 3/4/5, EIA/TIA- 568 STP Netwo
ملخص المحتوى في الصفحة رقم 19
Physical and Environmental AC inputs: 100 – 240 VAC, 50/60 Hz Power 30 watts maximum Consumption: Operating 0 ~ 50 degrees Celsius Temperature: Storage -10 ~ 70 degree Celsius Temperature: Humidity: 10% ~ 90% RH, non-condensing Dimensions: 280 mm x 180 mm x 44 mm EMI: FCC Class A, CE Mark Class A, VCCI-A Safety: UL (UL 1950), TUV/GS (EN60950) Performance Transmission Store-and-forward Method: RAM Buffer: 256K bits per device Filtering Address 6K MAC address per device T
