Plinius Audio M12 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PLINIUS M12 PREAMPLIFIER
Final Test Certified by:
Date of Manufacture:
Serial Number:
Model 12 as it does require some familiarisation before you add it to your music system.
performance for many years to come. Please read this manual fully before you attempt to use the
manufactured by hand and under normal circumstances will maintain its present high level of
Thank you for buying a Plinius product. This Preamplifier has been carefully designed and

ملخص المحتوى في الصفحة رقم 2

level amplification stages. high The volume control is an ALPS type and will accurately convey the source signals to the CONTROLS. the front panel only activate the relays. They do not carry any audio signals. potentiometers have been selected from Audiophile quality types. The two selector switches on Siltech. All switching is done by high quality silver contact relays and the cable is by Every component used within the Model12 has been chosen for sonic excellence and all signal material, the

ملخص المحتوى في الصفحة رقم 3

when operated. When the Model12 is in the 'Mute' position the LED on the front will be slightly less bright than sent to the amplifiers. Someone may use the system not realising the level is set and a high volume of signal may be Do not leave the Volume Control at a high level when the preamplifier is in the 'Mute' mode. 'Mute' position when not in use. This will prevent any unwanted signals reaching the amplifier. instantaneous interruption to answer the 'phone etc. It is wise to leave the prea

ملخص المحتوى في الصفحة رقم 4

deck. cause feedback howl. While dubbing, the Source Selector allows easy monitoring of either tape sockets , so inadvertently switching it to record mode will not not get a signal fed to its input A 'Tape Lock' feature ensures that the machine playing back and selected as a record source does Select Tape 2 as a record source and its output will go to Tape 1. eg. Select Tape 1 as a record source and its playback output will go to Tape 2. other tape deck. either Tape Input with the Record Selec

ملخص المحتوى في الصفحة رقم 5

surface. A damp cloth is all that is required to remove dust and finger marks from the Model 12's anodised CLEANING. advise on any further installation requirements. and will be able to factory. Your Plinius Dealer has a good understanding of our Amplifiers Dealer in its original packaging. He will then determine if the unit should be returned to the In the unlikely event that your Model 12 should require any service please take it firstly to your mains Supply Plug first. The Voltages present