ملخص المحتوى في الصفحة رقم 1
TigerSwitch 10/100
50-Port Layer 2 Switch
◆ 48 10BASE-T/100BASE-TX auto-MDI/MDI-X ports
◆ 2 auto-MDI/MDI-X 10/100/1000BASE-T combo ports
with associated SFP slots
◆ Non-blocking switching architecture
◆ Support for redundant power unit
◆ Spanning Tree Protocol
◆ Up to six LACP or static 4-port trunks
◆ Layer 2/3/4 CoS support through four priority queues
◆ Full support for VLANs with GVRP
◆ IGMP multicast filtering and snooping
◆ Manageable via console, Web, SNMP/RMON
Management Guide
SMC6750L2
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
TigerSwitch 10/100 Management Guide From SMC’s Tiger line of feature-rich workgroup LAN solutions 38 Tesla Irvine, CA 92618 June 2002 Phone: (949) 679-8000 Pub. # 150200016800A
ملخص المحتوى في الصفحة رقم 4
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or oth- erwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2002 by SMC Networks, Inc. 38 Tesla Irvine, CA 92618 All rights
ملخص المحتوى في الصفحة رقم 5
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable
ملخص المحتوى في الصفحة رقم 6
WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES
ملخص المحتوى في الصفحة رقم 7
CONTENTS 1 Switch Management . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Connecting to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Required Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Remote Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Basic Configuration . . . . . . .
ملخص المحتوى في الصفحة رقم 8
CONTENTS Configuring Interface Connections . . . . . . . . . . . . . . . . . . . . . . 2-26 Setting Broadcast Storm Thresholds . . . . . . . . . . . . . . . . . . . . . 2-28 Configuring Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 Address Table Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 Setting Static Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 Displaying the Address Table . . . . .
ملخص المحتوى في الصفحة رقم 9
CONTENTS Configuring IGMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . 2-72 Interfaces Attached to a Multicast Router . . . . . . . . . . . . . . . . . 2-74 Displaying Port Members of Multicast Services . . . . . . . . . . . . 2-77 Adding Multicast Addresses to VLANs . . . . . . . . . . . . . . . . . . 2-78 Showing Device Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-79 3 Command Line Interface . . . . . . . . . . . . . . . . . . . . . . 3
ملخص المحتوى في الصفحة رقم 10
CONTENTS whichboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 boot system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 System Management Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25 username . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26 en
ملخص المحتوى في الصفحة رقم 11
CONTENTS show ip redirects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54 ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54 Line Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-56 line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-57 login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 12
CONTENTS bridge priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-87 bridge-group path-cost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-88 bridge-group priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-89 bridge-group portfast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-90 show bridge group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-91 VLAN Commands . . .
ملخص المحتوى في الصفحة رقم 13
CONTENTS switchport priority default . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-121 queue bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-122 queue cos-map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-123 show queue bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-125 show queue cos-map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-125 map ip port (Global Configuratio
ملخص المحتوى في الصفحة رقم 14
CONTENTS APPENDICES: A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Upgrading Firmware via the Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . A-2 B Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1 Console Port Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 DB-9 Port Pin Assignm
ملخص المحتوى في الصفحة رقم 15
CHAPTER 1 SWITCH MANAGEMENT Connecting to the Switch Configuration Options The TigerSwitch 10/100 SMC6750L2 includes a built-in network management agent. The agent offers a variety of management options, including SNMP, RMON and a Web-based interface. A PC may also be connected directly to the switch for configuration and monitoring via a command line interface (CLI). Note: The IP address for this switch is assigned via DHCP by default. To change this address, see “Setting an IP Address” on
ملخص المحتوى في الصفحة رقم 16
SWITCH MANAGEMENT The switch’s CLI configuration program, Web interface, and SNMP agent allow you to perform the following management functions: • Set user names and passwords for up to 16 users • Set an IP interface for a management VLAN • Configure SNMP parameters • Enable/disable any port • Set the speed/duplex mode for any port • Configure up to 255 IEEE 802.1Q VLANs • Enable GVRP automatic VLAN registration • Configure IGMP multicast filtering • TFTP upload and download of system firmw
ملخص المحتوى في الصفحة رقم 17
CONNECTING TO THE SWITCH Attach a VT100-compatible terminal, or a PC running a terminal emulation program to the switch. You can use the console cable provided with this package, or use a null-modem cable that complies with the wiring assignments shown in Appendix B. To connect a terminal to the console port, complete the following steps: 1. Connect the console cable to the serial port on a terminal, or a PC running terminal emulation software, and tighten the captive retaining screws on t
ملخص المحتوى في الصفحة رقم 18
SWITCH MANAGEMENT 4. Once you have set up the terminal correctly, the console login screen will be displayed. For a description of how to use the CLI, see “Using the Command Line Interface” on page 3-1. For a list of all the CLI commands and detailed information on using the CLI, refer to “Command Groups” on page 3-10. Remote Connections Prior to accessing the switch’s onboard agent via a network connection, you must first configure it with a valid IP address, subnet mask, and default gate
ملخص المحتوى في الصفحة رقم 19
BASIC CONFIGURATION Basic Configuration Console Connection The CLI program provides two different command levels — normal access level (Normal Exec) and privileged access level (Privileged Exec). The commands available at the Normal Exec level are a limited subset of those available at the Privileged Exec level and allow you to only display information and use basic utilities. To fully configure switch parameters, you must access the CLI at the Privileged Exec level. Access to both CLI leve
ملخص المحتوى في الصفحة رقم 20
SWITCH MANAGEMENT Passwords can consist of up to 8 alphanumeric characters and are case sensitive. To prevent unauthorized access to the switch, set the passwords as follows: 1. Open the console interface with the default user name and password “admin” to access the Privileged Exec level. 2. Type “configure” and press . 3. Type “username guest password 0 password,” for the Normal Exec level, where password is your new password. Press . 4. Type “username admin password 0 pass
