Q-Logic QLogic5800 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

[ Quick Start Guide ]
FIBRE CHANNEL SWITCH INSTALLATION
z
QUICK START GUIDE

ملخص المحتوى في الصفحة رقم 2

Quick Start Guide Installation Instructions Congratulations on your purchase of the QLogic 3810 Fibre Channel Switch. This guide describes the steps to install ® ® and activate your new switch using a Windows workstation. For advanced options and instructions (including Solaris , ® ® Linux , and Mac OS X installations), refer to the QLogic 3810 Fibre Channel Switch Installation Guide, which is available at www.qlogic.com. NOTE Do not apply power to the switch until instructed in Step 4. Step

ملخص المحتوى في الصفحة رقم 3

Step 4. Apply Power to the Switch INPUT POWER LED ❑ Plug the AC power cord into the switch and into a wall HEARTBEAT outlet or power strip. Verify that the Input Power LED LED is lit. ❑ The switch runs its self tests, and begins normal SYSTEM operation—this may take a few minutes. Verify that FAULT LED the Heartbeat LED is blinking (once per second), and the System Fault LED is not lit. Step 5. Verify Workstation Requirements ❑ Verify that your workstation can support the QuickTools™ app

ملخص المحتوى في الصفحة رقم 4

Step 9. Connect Devices ❑ Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port auto-negotiates the correct port type with the connected device. Congratulations You have successfully installed your QLogic 3810 Switch. Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods: Web: http://support.qlogic.com E-