Pelco PV130 RS-422 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TX-
TX+
RX-
RX+
GND
+12 VDC
C1919M-C (11/00)
PV130 RS-232/422 Converter Kit
Installation Instructions
®
3500 Pelco Way, DESCRIPTION
Clovis, CA 93612-5699
The PV130 RS-232/422 Converter Kit provides a bi-directional electrical interface between RS-232
USA
and RS-422 data ports.
In North America & Canada:
Tel (800) 289-9100 The plug-in power supply, included in this package, allows the PV130 to communicate serial port
FAX (800) 289-9150
data over wire pairs for distances up to 4,000 feet (1,219 m)

ملخص المحتوى في الصفحة رقم 2

Testing (Refer to PV1000 Instruction/Operation Manual) 1. Ensure that the PV1016 Transmitter DIP switch settings or the PV1004 Transmitter programming are correct for the telemetry type required by the receiver. 2. Ensure that the PV1000 Transmitter is properly programmed for the COM 2 port baud rate and parity required by the receiver. 3. Confirm receiver PTZ control from a PV1016 Transmitter with front panel keyboard (while off-line) or from the PV1016 Receiver (while on-line). Check for smoot