NETGEAR ProSafe FS726TP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

3. Click Install SmartWizard. Follow the prompts to complete the installation of

the SmartWizard GearDiscovery utility.


4. Click OK when done.
Next, Connect Your Smart Switch in the Correct Order
Start Here
Follow these instructions to set up your smart switch.
Note: These instructions assume you are using DHCP in your network. If you are
using static IP addressing in your network, configure the switch IP address before

Prepare to Install Your Smart Switch
connecting it to your networ

ملخص المحتوى في الصفحة رقم 2

After you log in to the switch, the main Web Access menu displays. Make sure the Ethernet cables are securely plugged in. For each powered on computer connected to the smart switch with a securely plugged in Ethernet cable, the corresponding smart switch LAN port status light will be lit. Make sure the network settings of the computer are correct. In most cases, computers should be configured to obtain an IP address automatically via DHCP. For help with this, please see the animated tutori