NETGEAR Home Theater NetworkGS605AV-100NAS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

GS605AV_IG_08Dec09.fm Page 1 Tuesday, December 8, 2009 7:53 PM
4. Connect the power adapter cord into the back of the switch and then plug the adapter
Install the Switch and Connect the
into a power source (such as a wall socket or power strip).

Other Devices
5. Check the LEDs to confirm that the switch is connected correctly.
5-Port Home Theater & Gaming Network Switch GS605AV
• The Power LED is lit.
1. Place the switch on a flat surface.
Estimated installation time: 5-10 minutes
• Each p

ملخص المحتوى في الصفحة رقم 2

GS605AV_IG_08Dec09.fm Page 2 Tuesday, December 8, 2009 7:53 PM The Port number light is not lit for a connected Technical Specifications Technical Specifications device or stays on continuously. Performance Specifications Technical Specifications There is a hardware connection problem. Frame filter rate 14,880 frames/sec max for 10M port Standards compatibility Specifications IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u, 148,800 frames/sec max for 100M port • Make sure that the cable connect