Murphy SWICHGAGE 45TEBP دليل المستخدم

ملخص المحتوى في الصفحة رقم 2

CASE MOUNTING Flush Mount Wall Mount 1 A round case design to be mounted within a panel from /32 in. Flanged case design intended for wall mount. Shown with shock 1 (1 mm) to /8 in. (3 mm) thick. mounts (optional). 5-7/16 in. 2-57/64 in. 8-7/16 in. (138 mm) (73 mm) (214 mm) 3-3/8 in. 7-7/8 in. (86 mm) (200 mm) 3-15/16 in. 1/2 in. 4-1/32in. 120 (100 mm) 120 (13 mm) (102 mm) conduit panel 120 Optional 1/2 in. (13 mm) Mounting Hole 1/4 in. (6 mm) dia. conduit 4-3/4 in. holes (3 places.) on (121

ملخص المحتوى في الصفحة رقم 3

SENSING BULB-THERMOWELL INSTALLATION Precautions Installing Thermowell ® SWICHGAGE Cutting or sharp bending the capillary will cause permanent damage Thermowell is recommended for high ® 100 500 to the SWICHGAGE and will void the warranty. Excess capillary pressure applications or corrosive 800 0 environments. It also allows tempera- should be carefully coiled and secured away from damage. Do not ture sensor to be changed or adjusted route capillary along exhaust manifold. Avoid routing capill

ملخص المحتوى في الصفحة رقم 4

Brown Orange R E G I S TYPICAL ELECTRICAL DIAGRAMS WARNING: Perform the wiring operation with the power source “OFF”. Make sure the voltage and current ® requirements are within the SWICHGAGE ratings. Before wiring determine voltage and polarity for the application. Use the appropriate wire size. All connections should be made using a spade (forked) or ring terminals. For pigtail connections use wire nuts. Conduit is recommended to protect wires from damage. SPLC and SPLFC 45TE and 45TEF Con

ملخص المحتوى في الصفحة رقم 1

SPL-92106N
Revised 04-04
1
Installation for 4- /2 in. (114 mm) dial
Section 10
(00-02-0167)
® ®
Temperature MURPHYGAGE and SWICHGAGE
Model Series: SPLG, SPLC, SPLBP, 45TE and 45TEBP
Options: -OS and -ES
Please read the following instructions before installing. A visual inspection is recommended before mounting.
General Information and these installation instructions are intended for all 4-1/2 in. (114 mm) dial temperature models.
GENERAL INFORMATION
*
®
WARNING
BEFORE BEGINNING INSTALLATION OF