ملخص المحتوى في الصفحة رقم 1
8 Port 10/100BASE-TX
Plus One
100BASE-FX
or
1000BASE-FX Port
Advanced Managed Switch
MIL-SME801P
MIL-SME801GSX
MIL-SME801GLX
USER GUIDE
ملخص المحتوى في الصفحة رقم 2
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Dir
ملخص المحتوى في الصفحة رقم 3
Table of Contents 1. Introduction Features Intelligent Management Features Package Contents Management Methods Console and Telnet Management Web-based Management 2. Hardware Description Front Panel LED Indicators Rear Panel Desktop Installation Power On 3. Network Application Small Workgroup Extended Workgroup 4. Console Management Connecting a Terminal or PC to the Console Port Console - Men
ملخص المحتوى في الصفحة رقم 4
4-3-8-2. Broadcast Storm Filtering 4-3-8-3. Max Bridge Transmit Delay Bound 4-3-8-4. Collision Retry Forever 4-3-8-5. Hash Algorithm 4-3-8-6. IFG Compensation 4-4. Protocol Related Configuration 4-4-1. STP 4-4-1-1. STP Setup 4-4-1-2. System Configuration 4-4-1-3. STP Per Port Setting 4-4-2. SNMP 4-4-2-1. SNMP System Options 4-4-2-2. Community Strings 4-4-2-3. Trap Managers 4-4-3. LACP 4-4-3-1. Working
ملخص المحتوى في الصفحة رقم 5
5-4-5-3. State Activity 5-4-6. Forwarding and Filtering 5-4-6-1. IGMP Snooping 5-4-6-2. Static MAC Address 5-4-6-3. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Port-based VLAN 5-4-7-2. 802.1Q VLAN 5-4-8. Spanning Tree 5-4-8-1. System Configuration 5-4-8-2. Per Port Configuration 5-4-9. Port Mirroring 5-4-10. SNMP 5-4-11. Security Manager 5-4-12. 802.1x 5-4-12-1. System Configuration 5-4-12-2. Pe
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
1. Introduction The MIL-SME801P and MIL-SME801G advanced managed switch families are multi-port switches that can be used to build high-performance workgroup networks and as Customer Provider Edge (CPE) devices in Fiber-to-the-Home (FTTH) networks. Figure 1-1. The MIL-SME801P switch The MIL-SME801P switch has eight auto-sensing 10/100BASE-TX RJ-45 ports plus one 100BASE-FX fiber port that enables lo
ملخص المحتوى في الصفحة رقم 8
Features Console and Telnet management Conforms to IEEE803.u 10BASE-T, 802.3u 100BASE-TX/FX 8 auto-sensing 10/100Mbps Ethernet RJ-45 ports One 100 FX fiber port Switch fabric bandwidth up to 8.8 Gbps throughput Full Layer 2 management function Port mirroring IGMP support for Multi media applications Back-Pressure-Base flow control on Half-duplex link mode Pause-Frame-Base flow control on Ful
ملخص المحتوى في الصفحة رقم 9
Intelligent Management Features Management Telnet management, Web management, In-Band Local Console (RS-232) RFC Standard RFC 1157 SNMP, RFC 1213 MIB II, Bridge MIB, RFC 1643 ETHERNET LIKE, RFC 1493 BRIDGE MIB, RFC 1757 RMON 1, RFC 1215 Trap Software TFTP and console firmware upgrade Upgrade Port Trunk Supports IEEE802.3ad and IEEE802.1ad with LACP function and provides 2 Trunk groups of 4 member port
ملخص المحتوى في الصفحة رقم 10
IGMP IGMP Snooping for Multi-Media applications, IGMP group supports 256 groups Port Security MAC address filtering for ingress packets Static MAC address lock for source address. Port Mirror Global system supports 3 mirroring types: RX, TX and Both. The maximum mirror entries is 8. Bandwidth Per port bandwidth control support. Per level 100K. Control 802.1x Supports IEEE802.1x user authentication and can re
ملخص المحتوى في الصفحة رقم 11
Package Contents Unpack the contents of the package and verify them against the checklist below. MIL-SME801P Switch Power Cord Four Rubber Feet RS-232 cable Rack-mounted kit CD ROM containing Users Guide If any item is missing or damaged, please contact your local dealer for service. 5
ملخص المحتوى في الصفحة رقم 12
Management Methods The MIL-SME801P switch supports the following management methods: Console and Telnet Management Web-based Management Console and Telnet Management Console Management is done through the RS-232 Console Port. Managing the switch in this method requires a direct connection between a PC and the Telnet management requires a network connection. The default IP address switch. is 1
ملخص المحتوى في الصفحة رقم 13
2. Hardware Description Front Panel The Front Panel of the MIL-SME801P switch consists of eight 10/100BASE-TX RJ-45 ports and one 100BASE-FX fiber port, one LED-Indicator for Power, one LED-Indicator for the Fiber port, and 3 LED-Indicators for each of the RJ-45 ports on the switch. Figure 2-1. Front panel for MIL-SME801P RJ-45 Ports (Auto MDI/MDIX): The MIL-SME801P comes with eight 10/100Mbps N-
ملخص المحتوى في الصفحة رقم 14
LED Indicators The LED Indicators give real-time information of systematic operation status. The following table provides descriptions of LED statuses and their meaning. LED Status Color Description Power On Green Power On On Green The port is operating at 100Mbps. 100M The port is operating at 10Mbps mode or Off no device is attached. The port is successfully connecting with On Green the device.
ملخص المحتوى في الصفحة رقم 15
9
ملخص المحتوى في الصفحة رقم 16
Rear Panel The 3-pronged power plug and ventilation fan are located at the rear panel of the MIL-SME801P switch as shown in Figure 2-2. The switch will work with AC in the range 100-240V AC, 50-60Hz. Figure 2-2. The Rear Panel of MIL-SME801P Switch 10
ملخص المحتوى في الصفحة رقم 17
Desktop Installation Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface where you put your Switch should be clean, smooth, level, and sturdy. Provide enough clearance around the switch to allow attachment of cables, power cord and air circulation. Attaching Rubber Feet A. Make sure mounting surface on the bottom of the Switch is grease and dust free. B. Remov
ملخص المحتوى في الصفحة رقم 18
Power On Connect the power cord to the power socket on the rear panel of the switch. Connect the other end of the cord to an appropriate power outlet. The internal power supply in the switch works with AC in the voltage range 100-240VAC, frequency 50~60Hz. Check the power indicator on the front panel to see if power is properly supplied. 12
ملخص المحتوى في الصفحة رقم 19
3. Network Application Small Workgroup The MIL-SME801P switch can be used as a standalone switch to direct connect computers, servers and printer servers to form a small workgroup. Figure 3-1. Small Workgroup Application 13
ملخص المحتوى في الصفحة رقم 20
Extended Workgroup The MIL-SME801P switch can be also used o interconnect two small workgroups. By using the fiber ports to connect the switches, the distance between the two switches via fiber cable can be up to 2Km or 30Km (SC single-mode fiber connector). Figure 3-2. Fiber port on MIL-SME801P switch extends the distance between workgroups 14
