ملخص المحتوى في الصفحة رقم 1
Managed 8 & 9 Port Switches
MIL-SM801P
Eight 10/100BASE-TX Ethernet ports
Plus One 100BASE-FX port
MIL-SM801G
Eight 10/100BASE-TX Ethernet ports
Plus One 1000BASE-SX port
MIL-SM800P
Eight 10/100BASE-TX Ethernet ports
USER GUIDE
ملخص المحتوى في الصفحة رقم 2
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) i
ملخص المحتوى في الصفحة رقم 3
Table of Contents 1. Introduction Features Intelligent Management Features Package Contents Management Methods Console and Telnet Management Web-based Management SNMP Network Management 2. Hardware Description Front Panel LED Indicators Rear Panel Desktop Installation 3. Network Application Desktop Application Segment Application 4. Network Configuration Connecting a Terminal or PC to the Console Port Console - Menu 4-1. Main Menu 4-2. Status and Counters 4-2-1. Port Status 4-2-2. Port Counters
ملخص المحتوى في الصفحة رقم 4
4-4-2. SNMP 4-4-2-1. System Options 4-4-2-2. Community Strings 4-4-2-3. Trap Managers 4-4-3. GVRP 4-4-4. LACP 4-4-4-1. Aggregator Setting 4-4-4-2. State Activity 4-4-4-3. LACP Status 4-5. Switch Reboot 4-6. Xmodem Upgrade 5. Web-Based Management Web Management 5-1. Web Management Home Overview 5-2. Port Status 5-3. Port Statistics 5-4. Administrator 5-4-1. IP Address 5-4-2. Switch Settings 5-4-2-1. Basic 5-4-2-2. Advanced 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. Trunking 5-4-5
ملخص المحتوى في الصفحة رقم 5
1. Introduction The MIL-SM801P, MIL-SM801G and MIL-SM800P managed series of compact desktop switches are ideal solutions for network users. They provide wire-speed, Fast Ethernet switching providing high- performance data transfer. The switches feature a store-and-forward architecture with auto-learning of source addresses with an 8K-entry MAC address table. Figure 1-1. The MIL-SM801P switch The switches provide 8 switched auto-sensing 10/100 Mbps RJ-45 Ethernet ports. The MIL-SM801P provides on
ملخص المحتوى في الصفحة رقم 6
Features Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards Eight auto-sensing 10/100Mbps Ethernet RJ-45 ports Automatic MDI/MDIX crossover for each 10BASE-T/ 100BASE-TX port One Fixed 100Mbps Fiber port SC/SC single-mode, MT-RJ, VF-45 connector for MIL-SM801P series only One Fixed 1000Mbps Gigabit Ethernet port for MIL-SM801G series only One Console port on the rear for switch software configuration Half-duplex mode for back pressure and fl
ملخص المحتوى في الصفحة رقم 7
Package Contents Unpack the contents of the package and verify them against the checklist below. MIL-SM801P, MIL-SM801G or MIL-SM800P switch Power Cord Four Rubber Feet RS-232 console cable User Guide Warranty Card If any item is missing or damaged, please contact your local dealer for service. Management Methods The MIL-SM801P, MIL-SM801G and MIL-SM800P switch series support the following management methods: Console and Telnet Manageme
ملخص المحتوى في الصفحة رقم 8
2. Hardware Description Front Panel RJ-45 Ports (Auto MDI/MDIX): Eight 10/100 auto-sensing for 10BASE-T or 100BASE-TX connections. Figure 2-1. Front Panel for MIL-SM800P 100BASE-FX Fiber Port: There are 4 types of fiber connectors available for the MIL-SM801P. The distance for multi-mode fiber cabling can be up to 2 kilometers. However, the distance for SC single-mode fiber port is 60 kilometers. Figure 2-2. Front Panel for MIL-SM801P 1000BASE-SX Gigabit Ethernet Port: There is one 1000Mbps Gi
ملخص المحتوى في الصفحة رقم 9
LED Indicators Figure 2-4. LED Indicators There are three LED-Indicators (100M, LNK/ACT, FDX/COL) for each RJ-45 port. The following table provides descriptions of the LED statuses and meaning. They provide a real-time indication of systems operation status. LED Status Color Description Power On Green Power On The port is operating at the speed of On Green 100Mbps. 100M The port is operating at the speed of Off 10Mbps. The port is successfully connecting with On Gre
ملخص المحتوى في الصفحة رقم 10
Rear Panel The Console port and 3-pronged power plug are located at the Rear Panel of the MIL-SM801P, MIL-SM801G and MIL-SM800P switches as shown in Figure 2-5. The switches will work with AC in the range 100- 240V AC, 50-60Hz. Figure 2-5. The Rear Panel of the switch Console Port: Console management can be done through the Console Port. It requires a direct connection between the switch and an end station (PC) via a RS-232 cable. Desktop Installation
ملخص المحتوى في الصفحة رقم 11
Attaching Rubber Feet A. Make sure the mounting surface on the bottom of the switch is grease and dust free. B. Remove adhesive backing from the rubber feet. C. Apply the rubber feet to each corner on the bottom of the switch. These footpads can protect the switch from shock and vibration. Figure 2-6. Attaching Rubber Feet to each corner on the bottom of the switch Power On Connect the power cord to the power socket on the rear panel of the switch. Connect the other end of the cord to an appropr
ملخص المحتوى في الصفحة رقم 12
3. Network Application Desktop Application The switch can be used as a standalone switch connecting personal computers, servers, or print servers directly connecting to form small workgroups. Figure 3-1. Desktop Application 8
ملخص المحتوى في الصفحة رقم 13
Segment Application For enterprise networks where large data broadcasts are constantly processed, this switch is suitable for individual department users to connect to the corporate backbone. Figure 3-2. Fiber port on MIL-SM801P switch extends the distance between workgroups 9
ملخص المحتوى في الصفحة رقم 14
4. Network Configuration Connecting a Terminal or PC to the Console Port Console management involves the administration of the switch via a direct connection to the RS-232 console port. This port is a female DB- 9 connector. From the main menu of the console program, the user has access to manage the functions of the switch. Figure 4-1. Connecting the switch to a terminal via RS-232 cable Use the supplied RS-232 cable to connect a terminal or PC to the console port. The terminal or PC to be conn
ملخص المحتوى في الصفحة رقم 15
After the connection between switch and PC is finished, turn on the PC and run a terminal emulation program or HyperTerminal to match the following default characteristics of the console port: Baud Rate: 9600 bps Data Bits: 8 Parity: none Stop Bit: 1 Control flow: None Figure 4-2. The settings of communication parameters After you have finished parameter settings, press the “Enter" Key and the Main Menu of console management appears. Console – Menu 1. The switch also provides a serial interface
ملخص المحتوى في الصفحة رقم 16
4-1 Main Menu There are five items for selection as follows: Status and Counters: Shows the status of the switch. Switch Static Configuration: Menus to configure the switch. Protocol Related Configuration: Configures protocol features. Reboot switch: Restarts the system or resets switch to default configuration. Logout: Exits the menu line program. The control keys listed below are provided in all menus: Tab: Moves the cursor to next item. Backspace: Moves the cursor to previous i
ملخص المحتوى في الصفحة رقم 17
4-2. Status and Counters Press the Tab or Backspace key to choose action menu, and then press Enter key to select item. 13
ملخص المحتوى في الصفحة رقم 18
4-2-1. Port Status Type: Displays the port type of either 10/100TX or Fiber Enabled: A port that is enabled will be displayed as “Yes”. A port that is disabled will be displayed as “No”. Status: Displays the port’s link. “Down” the port has no link, and “Up” the port has a link with the remote device. Mode: Displays the port speed and duplex mode. FlowCtrl: Displays the flow control for the port as being either on or off. Actions-> Press the Tab or Backspace key to choose action menu, and then p
ملخص المحتوى في الصفحة رقم 19
4-2-2. Port Counters The following information provides a view of the current data packet information of the unit. The screen is not automatically updated. To see updated statistics, exit the menu and re-enter. Actions-> Press the Tab or Backspace key to choose action menu, and then press Enter key to select item : Exits the page of port status and returns to previous menu. : Sets all counters to 0. 4-2-3. System Information System Description: Displays the name of device type
ملخص المحتوى في الصفحة رقم 20
4-3. Switch Static Configuration Press the Tab or Backspace key to choose action menu, and then press the Enter key to select item 4-3-1. Administration Configuration 16
