MicroNet Technology SP624R دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Installation Guide

EtherFast 10/100M Switch

Model No.: SP624R


http://www.micronet.info

ملخص المحتوى في الصفحة رقم 2

Introduction Micronet SP624R 10/100M Switch provides powerful, high-performance Ethernet switch, with all ports capable of 10 and 100M auto-negotiation operation. With its intelligent addressing engine, it provides users with a wire-speed filtering and forwarding of the traffic. All ports support auto-uplink detection, so users don't have to worry about the cable type. Each port will automatically communicate for best speed and to run in half- or full-duplex mode. Store-and-forward switc

ملخص المحتوى في الصفحة رقم 3

Features Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE802.3x flow control Support auto-negotiation function to automatically select optimal speed (10/100M) and mode (Full/Half Duplex) Support auto uplink, no more cross-over cable Support 802.3x flow control for full-duplex mode and back-pressure flow control for half-duplex mode Forward and filter packets at non-blocking, full wire speed Standard 19” rack-mount size 100 - 240V AC, universal internal power s

ملخص المحتوى في الصفحة رقم 4

Physical Description SP624R front view Please refer to the following table for LED definition. LED Status Operation POWER On Power is on. Off Power is off. On/Green Connection established. LNK/ACT Blink/Green Transmitting or receiving data. Off No link. 3

ملخص المحتوى في الصفحة رقم 5

Installation Rack Mounting The switch can be mounted in an EIA standard 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front panel (one on each side), and secure them with the provided screws. Then, use screws provided with the equipment rack to mount each switch in the rack. Connecting your network The switch provides up to 24 ports for 10/100BaseTX. Just connect each station to the switch by twisted-pair cab

ملخص المحتوى في الصفحة رقم 6

Specifications IEEE802.3, IEEE802.3u, IEEE802.3x, Standard compliant Interface 24 * 10/100M RJ-45 ports 10BASE-T: Cat. 3, 4, 5 UTP/STP Cable Connections 100BASE-TX: Cat. 5 UTP/STP 10M(Half duplex)/20M(Full duplex) Data Transfer Rate 100M(Half duplex)/200M(Full duplex) Uplink Auto Uplink (Auto MDI / MDI-X) Switch Fabric 4.8Gbps Filtering/Forwarding 10Mbps: 14,880pps/14,880pps Rate 100Mbps: 148,800pps/148,800pps Emission FCC, CE o o o o Operating Temperature 0 - 40 C (32 - 104 F

ملخص المحتوى في الصفحة رقم 7

CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Company has an on-going policy of upgrading its products and it may be possible that information in this document is not up-to-date. Please check with your local distributors for the latest information. No part of this