ملخص المحتوى في الصفحة رقم 4
Install: Desktop 2 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 5
TM Install: Wall 3 140988 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 6
TM Install: Wall 4 Linksys Business Series SFE2000 Fast Ethernet Switch 180911
ملخص المحتوى في الصفحة رقم 7
Install: Rack 5 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 8
Connect Data Devices 6 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 9
Connect Linksys One Devices 7 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 10
Connect to Power 8 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 11
Install: Stack 9 Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build Stacks and Understand Their Operation,” available at www.linksys.com. 180777 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 12
Install: Stack 10 Warning Use only ports G1/G2 for stacking. If you manually assign a Unit ID to one unit, you should manually assign Unit IDs to all units. Using both system-assigned and manually-assigned IDs in your network can impact system performance. Linksys Business Series SFE2000 Fast Ethernet Switch 180778
ملخص المحتوى في الصفحة رقم 13
Connect Data Devices 11 Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 14
Connect to Power 12 Linksys Business Series SFE2000 Fast Ethernet Switch 180780
ملخص المحتوى في الصفحة رقم 15
Regulatory Compliance and Safety Information The Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards: Specification Description Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below. Safety UL 60950-1 IEC60950-1 CB / TUV/Rh CSA-C22.2 No. 60950 EN 60950 AS/NZS 60950-1 C-Tick EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN
ملخص المحتوى في الصفحة رقم 16
Federal Communication Commission Interference Statement This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause har
ملخص المحتوى في الصفحة رقم 17
Environmental Specifications Dimensions 17.32" x 1.73" x 14.70" (440 mm x 44 mm x 375 mm) Unit Weight 9.68 lbs. or 154.85 oz (4.39 kg) Power 48 VDC, 100-240V 1.5A Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A EN60950 (2001) Security ACL, 802.1x Operating Temp 0ºC to 40ºC (32ºF to 104ºF) Storage Temp -20ºC to 70ºC (-4ºF to 158ºF) Operating Humidity 10% to 90% relative humidity, Non-Condensing Storage Humidity 10% to 95% relative humidity, Non-Condensing Lin
ملخص المحتوى في الصفحة رقم 18
Safety Information The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with
ملخص المحتوى في الصفحة رقم 19
Warning Installation Instructions Read the installation instructions before connecting the system to the power source. Warning SELV Circuit To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Warning Equipment Installation Only trained and qualified personnel should b
ملخص المحتوى في الصفحة رقم 20
Warning Comply with Local National Electrical Codes Installation of the equipment must comply with local and national electrical codes. Warning Product Disposal Ultimate disposal of this product should be handled according to all national laws and regulations. Linksys Business Series SFE2000 Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 1
Linksys Business Series 24-port Fast Ethernet Switch
Model SFE2000
QUICK INSTALLATION GUIDE
ملخص المحتوى في الصفحة رقم 2
Linksys Business Series Fast Ethernet Switch
ملخص المحتوى في الصفحة رقم 3
Linksys Business Series SFE2000 Fast Ethernet Switch 1 180772 Linksys Business Series SFE2000 Fast Ethernet Switch
