Lindy 25058 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

8 Port PoE Midspan Switch

User Manual English































LINDY No. 25058



www.LINDY.com
For Home and Office Use
Tested to Comply with
FCC Standards

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (Mar 2010)

ملخص المحتوى في الصفحة رقم 2

English Manual English 2 Introduction This PoE Mid-span is 8-pair port power supply consisting of 8 Ethernet data input ports, and 8 Ethernet data output ports with 48V power equipped, which is fully IEEE 802.3af compliant. Any Ethernet “Data” cable can directly connect to the input port and then come out “Data + Power” from output port. It is smart plug and play and very easy to install in any existing networking system, to bring in PoE features without any new reconfi

ملخص المحتوى في الصفحة رقم 3

English Manual English 3 Front Panel (LEDs) LED Indicators of 8 Pair Port PoE Mid-Span Power Supply LED Status Description Power On Power is on. Off Power is off. PD On Port is connected to a Power Device Link port and supplies 48 Off No Power Device is connected Connections Power Device/Existing Switch to this 8 Pair Port Mid-Span Power Supply Use Cat. 5 twisted-pair cable from the existing switch to the “Data” input port of this Mid-span

ملخص المحتوى في الصفحة رقم 4

English Manual English 4 Rear Panel (Power) AC input AC input (100~240V/AC, 50~60Hz) UL Safety Technical Specifications IEEE 802.3af Standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX Number of Ports: Features 8 10/100BaseT(X) Data-In Ports 8 10/100BaseT(X) Data and Power-Out Ports Per Port: PoE ACT/Status LED Indicators Per Unit: Power Power Input 100~240V/AC, 50~60Hz 48V/DC Per Port Output – 15.4 W Max Per Port Power Output 8 Ports

ملخص المحتوى في الصفحة رقم 5

Radio Frequency Energy, Certifications FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CE Statement, EMC Compatibilty This device complies with EN Standards EN55022 and EN55024 according to the relevant EC EMC Directive. It must be used with shielde