ملخص المحتوى في الصفحة رقم 1
NuPRO-850
Full-Size ePCI-X System
Host Board
Intel® Pentium® 4 processor
User’s Manual
Recycled Paper
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
© Copyright 2004 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 1.00: June 18, 2004 Part Number: 50-13045-100 The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or docu
ملخص المحتوى في الصفحة رقم 4
Getting Service from ADLINK Customer Satisfaction is top priority for ADLINK Technology Inc. If you need any help or service, please contact us. ADLINK TECHNOLOGY INC. Web Site http://www.adlinktech.com Sales & Service Service@adlinktech.com TEL +886-2-82265877 FAX +886-2-82265717 Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan Please email or FAX your detailed information for prompt, satisfactory, and consistent service. Detailed Company Information Company/Orga
ملخص المحتوى في الصفحة رقم 5
Table of Contents Chapter 1 Introduction..................................................................1 1.1 Unpacking Checklist........................................................................ 2 1.2 Features .......................................................................................... 3 1.3 Functional Blocks and Main Board.................................................. 4 1.4 Specifications.......................................................................
ملخص المحتوى في الصفحة رقم 6
How to Use This Guide This manual is designed to help users configure the NuPRO-850 Full-Size ePCI-X System Host Board with Dual Xeon CPU. It is divided into five chapters. Chapter 1 Introduction Gives an overview of the product features, applications, and specifications. Chapter 2 Connectors and Jumpers Outlines all the connectors and its pin definitions. Chapter 3 Getting Started Summarization of what is required to setup an operational system using the NuPRO-850. Hardware i
ملخص المحتوى في الصفحة رقم 7
1 Introduction The NuPRO-850 is a full-size ePCI-X System Host Board (SHB) based on the Intel® Pentium® 4 processor and 875P Memory Controller Hub / 6300ESB I/O Controller Hub chipset. It features AGP4X/8X VGA, Serial ATA I/F, Gigabit Ethernet, and USB v2.0 I/F. It supports two PCI/PCI-X busses via the Intel 6300ESB chipset (one PCI-X 64-bit/66MHz bus and one PCI 32-bit/33MHz bus). The NuPRO-850 is designed to run under Windows 2000/XP and Linux operating systems as well as in embedded r
ملخص المحتوى في الصفحة رقم 8
1.1 Unpacking Checklist Check the shipping carton for any damage. If the shipping carton and contents are damaged, notify the dealer for a replacement. Retain the shipping carton and packing materials for inspection by the dealer. Obtain authorization before returning any product to ADLINK. Check the following items are included in the package, if there are any items missing, contact your dealer. • The NuPRO-850 module (May be equipped with different speed or capacity CPU, RAM, and HDD)
ملخص المحتوى في الصفحة رقم 9
1.2 Features • PICMG 1.2 Rev 1.0 Embedded PCI-X Specification compliant. • PCI Local Bus Specification, Rev 2.2 compliant. • Single Intel® Pentium® 4 processor with 1MB L2 cache, 533/800MHz FSB, Hyper-Threading Technology. • Four 184-pin DIMM sockets, support single/dual channel DDR DIMM. Up to four DIMMs of DDR 266/333/400 with ECC unbuffered. Supports a maximum of 4GB of system memory. • Intel® 82547GI Gigabit Ethernet Controller. Supports 1000Base-TX, 100Base-TX and 10Base-T (IEEE80
ملخص المحتوى في الصفحة رقم 10
1.3 Functional Blocks and Main Board The following topics provide an overview of the NuPRO-850 main features as shown in the functional block diagram below and also the main board. Functional Block Diagram Figure 1: Functional Block Diagram 4 • Introduction
ملخص المحتوى في الصفحة رقم 11
m P G A 4 7 8 B Main Board Drawing A M P Figure 2: Main Board Drawing Introduction • 5
ملخص المحتوى في الصفحة رقم 12
1.3.1 Intel® Pentium® 4 Processor The Intel® Pentium® 4 processor is based on Intel® NetBurst® microarchitecture and built with Intel®'s 0.13-micron and 90nm manufacturing process and featuring Hyper-Threading technology, a 1MB level two-cache size. The Intel® Pentium® 4 has a maximum clock speed of 3.4GHz and front side bus frequency of 400/533/800MHz. The Intel® NetBurst™ micro-architecture and Hyper-Threading Technology is designed specifically for multi-tasking environments and provi
ملخص المحتوى في الصفحة رقم 13
1.3.7 Software The NuPRO-850 is compatible with all major PC operating systems. ADLINK provides support, which may include additional drivers for ADLINK peripherals. Software device drivers for the NuPRO-850 may be found in the ADLINK CD. 1.3.8 AC’97 Link NuPRO-850 provides one AC’97 link 10-pin header, the AC’97 link is provided by the 6300ESB ICH. 1.3.9 Serial I/O NuPRO-850 provides one RS-232 serial port via one 10-pin connector. The serial port is provided by the 16550 compatibl
ملخص المحتوى في الصفحة رقم 14
1.4 Specifications Compliant Specifications • PICMG 1.2 Rev 1.0 Embedded PCI-X Specification compliant. • PCI Local Bus Specification, Rev 2.2 compliant. Form Factor • Standard Full-Size ePCI-X System Host Board, 338.6mm x 122mm (13.33”x4.8”). CPU/Cache • Intel® Pentium® 4 processor. The socket supports CPUs manufactured using Intel's 0.13-micron and 90nm manufacturing processes, FC-mPGA4 package (478-pin). ® • The Intel Pentium® 4 processor runs at a core speed of up to 3.4GHz, wi
ملخص المحتوى في الصفحة رقم 15
DDR DIMM timing register, which provides the DIMM speed control for the entire array, must be programmed to use the timings of the slowest DIMMs installed. Note: DIMMs must be populated in identical pairs for dual-channel operation BIOS: Award / Phoenix BIOS advanced by ADLINK • NuPRO-850 supports BIOS memory size up to 8Mbytes (Firmware Hub I/F). • Flash write protection will be implemented under software control. This bit must be set to 1 before any write will be allowed to the BIOS F
ملخص المحتوى في الصفحة رقم 16
• The NuPRO-850 edge connector uses three standard 32-bit PCI connectors. These three connectors carry two busses, one PCI-X 64-bit/66MHz bus and one PCI 32-bit/33MHz bus. Both busses are provided by Intel 6300ESB ICH. Hardware Monitor • The W83L784R provides temperature, fans, and voltage monitors. It has analog to digital converters that allow software to monitor the voltages on NuPRO-850. OS Compatibility • MS-DOS 6.2+, Windows 2000/XP, Red Hat Linux 7.3 or higher • Other OS suppo
ملخص المحتوى في الصفحة رقم 17
2 Jumpers and Connectors This chapter will familiarize the user with the NuPRO-850 with the interfaces and connections available before getting started. The chapter also contains information about the board layout, connector definitions and jumper setup as well as the following information: • NuPRO-850 board outline and illustration • NuPRO-850 connectors pin assignments • NuPRO-850 jumpers setting Jumpers and Connectors • 11
ملخص المحتوى في الصفحة رقم 18
2.1 NuPRO-850 Board Outline and Illustration 2.1.1 NuPRO-850 Top View CN16 CN13 CN17 LAN1 CN3 CN18 CN6 CN4 CN9 CN7 ePCI-X bus A JP1 CN10 CN11 JPY1 CN12 CN1 CN14 CN2 FN1 ePCI-X bus B PN1 DIMM1 DIMM2 DIMM3 DIMM4 U12 FN2 Figure 3: NuPRO-850 Top View 12 • Jumpers and Connectors
ملخص المحتوى في الصفحة رقم 19
2.1.2 Front View CN13 CN16 CN17 LAN1 Figure 4: View of Face Plate Position Description CN1 Case open pin header CN2 Front panel pin header CN3 COM1 connector CN4 Secondary IDE connector CN6 AC’97 link connector CN7 Primary IDE connector CN9 MiniPCI slot CN10 SATA-1 connector CN11 SATA-0 connector nd CN12 VGA 2 CRT pin header CN13 VGA CRT connector CN14 LVDS connector CN16 USB-0 connector CN17 USB-1 connector CN18 USB-2/3 pin header LAN1 Gigabit Ethernet RJ-45 connecto
ملخص المحتوى في الصفحة رقم 20
Table 1: Description of Connector Locations 2.2 NuPRO-850 Connector Pin Assignments A detailed description and pin-out for each connector is given in the following section. 2.2.1 VGA CRT connector (CN13) PIN SIGNAL FUNCTION RED Analog RED 1 GREEN Analog GREEN 2 3 BLUE Analog BLUE NC No Connect 4 GND Ground 5 6 GND Ground 7 GND Ground GND Ground 8 5VCC +5V 9 10 GND Ground NC No connect 11 DDC_DATA DDC Data for 12 CRT 13 HSYNC Horizontal sync for Monitor VSYNC Ver
