ملخص المحتوى في الصفحة رقم 1
User Guide
Streaming AV Products
JMP 9600
Two-Channel JPEG 2000 HD Video Player
68-1943-01 Rev. A
01 12
ملخص المحتوى في الصفحة رقم 2
Safety Instructions • English Warning Power sources • This equipment should be operated only from the power source indicated on the product. This This symbol is intended to alert the user of important operating and mainte- equipment is intended to be used with a main power system with a grounded (neutral) conductor. The third nance (servicing) instructions in the literature provided with the equipment. (grounding) pin is a safety feature, do not attempt to bypass or disable it. This symbol is
ملخص المحتوى في الصفحة رقم 3
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated
ملخص المحتوى في الصفحة رقم 4
Conventions Used in this Guide In this user guide, the following are used: CAUTION: A caution indicates a potential hazard to equipment or data. NOTE: A note draws attention to important information. TIP: A tip provides a suggestion to make working with the application easier. WARNING: A warning warns of things or actions that might cause injury, death, or other severe consequences. Commands are written in the fonts shown here: ^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C [01] R 0004 00300 00400
ملخص المحتوى في الصفحة رقم 5
Contents License Management Setup Dialog Box ...... 50 Introduction ............................................ 1 Player Info Setup Dialog Box ...................... 50 About this Guide ............................................. 1 Serial Port Setup Dialog Box ....................... 51 About the JMP 9600 ........................................ 1 Video Setup Dialog Boxes .......................... 52 Features ........................................................... 3 About Setup Dialog Bo
ملخص المحتوى في الصفحة رقم 6
Mounting and Maintenance ...............100 Reference Information ........................111 Mounting the Media Player .......................... 100 Specifications ............................................... 111 Ventilation Guidelines .............................. 100 Part Numbers ............................................... 114 Tabletop Use ............................................ 100 JMP 9600 Part Numbers ........................... 114 Rack Mounting .............................
ملخص المحتوى في الصفحة رقم 7
Introduction • About this Guide • About the JMP 9600 • Features About this Guide This guide contains installation, configuration, and operating information for the following Extron® media players: • JMP 9600 HD – JPEG 2000 Media Player HD • JMP 9600 HD 128 – JPEG 2000 Media Player HD 128 GB SSD • JMP 9600 2K – JPEG 2000 Media Player 2K • JMP 9600 2K 128 – JPEG 2000 Media Player 2K 128 GB SSD NOTE: In this manual, the terms “JMP 9600” and “media player” refer to any model unless otherwise spec
ملخص المحتوى في الصفحة رقم 8
Extron JMP 9600 2K Show Control System HD Video Player Ethernet Switch Linear Time Ethernet Linear Time Code Ethernet Code Sync Generator Timing Matches HD Content Format Dual Link Extron HD-SDI JMP 9600 2K HD Video Player Genlock Genlock Dual Link HD-SDI Large Venue Projectors 16 AES/EBU Digital Audio Ouputs Figure 1. Typical JMP 9600 Application Graphical User Interface Video Playback Display Blended Display Figure 2. Blended GUI and Video Playback Display The Linear Time Code (LTC)
ملخص المحتوى في الصفحة رقم 9
Features Digital video outputs: HD-SDI or DVI-I — • Two DVI-I outputs — One connector per output channel supports 8-bit 4:2:2 sampled RGB or YCrCb. • Two HD-SDI outputs — Can be configured as one dual link HD-SDI output or two single link HD-SDI outputs (one per channel — two single link outputs are available in 1-channel output mode only). NOTE: With HD-SDI 4:4:4 sampling, both video outputs (HDSDI-1 and HDSDI-2) are connected to the display. • The dual outputs of either format can opera
ملخص المحتوى في الصفحة رقم 10
Operational reliability — Dual redundant power supplies support round-the-clock operation in mission-critical applications. • Two AC power inputs — Support the media player through any power interruption short of a simultaneous loss of power on both power sources. • Two power input circuits — The two complete power circuits, from the plug, through fuse, switch, and power supply, to the power insertion onto the power distribution plane, are separate and independent from each other (see figure
ملخص المحتوى في الصفحة رقم 11
Linear Time Code feature — Supports strict system timing control. ESGEN and MSGEN Genlock capability — JMP 9600 2K units are capable of multi-unit synchronous operation. NOTE: ESGEN and MSGEN Genlock are proprietary sync signals that are native ® to Electrosonic products that have been acquired by Extron and to older Electrosonic products. Multi-screen capable — Multiple JMP 9600 2K units can be locked together for multi- screen applications General purpose input/output show control — Four op
ملخص المحتوى في الصفحة رقم 12
Installation This sections details the installation of the JMP 9600, including: • Mounting the Media Player • Connections and Features Mounting the Media Player CAUTION: Installation and service must be performed by authorized personnel only. Detailed mounting instructions can be found in the “Mounting and Maintenance“ section. The 2U high, JMP 9600 can be placed on a tabletop or mounted on a rack shelf. Use the included hardware for rack mounting. Connections and Features All system connectio
ملخص المحتوى في الصفحة رقم 13
Video and Audio Outputs Digital Video Outputs, DVI-I connectors — Connect one or two DVI displays to a the DVI-I-1 and DVI-I-2 connectors for the direct digital image and RGB video output. Figure 5 defines the pinout for the DVI protocol. C1 C2 1 8 Pin Signal Pin Signal Pin Signal 1 TMDS data 2– 9 TMDS data 1– 17 TMDS data 0– 9 C5 17 24 C3 C4 2 TMDS data 2+ 10 TMDS data 1+ 18 TMDS data 0+ Female Connector 31 TMDS data 2/4 11 TMDS data 1/3 9 TMDS data 0/5 shield shield shield 41 TMDS data 4– 2
ملخص المحتوى في الصفحة رقم 14
Sync In sync-critical applications, the media player can use one of two possible external sync signals, Genlock or Lock, in addition to the always-available Linear Time Code (LTC), to synchronize itself with other devices within a larger system. The media player can generate two of the sync signals to other devices. NOTES: • Use only one of the Genlock and Lock sync types (items and ) available. d e • Ensure that the resolution and frame rate of the applied genlock or lock input signal mat
ملخص المحتوى في الصفحة رقم 15
LAN Ports LAN ports — If desired, for IP control of the media player and content g transfer, connect the player to a PC or to an Ethernet LAN, via either of these RJ-45 connectors. You can use a PC to control the networked player with MSVPP commands from anywhere in the world. You can also control the player from any PC via the built-in HTML pages or MSVPP commands and the Extron DataViewer utility. Link (green) LED indicator — The Link LED indicates that the player is properly connected
ملخص المحتوى في الصفحة رقم 16
RJ-45 connector wiring The Ethernet cable can be terminated as a straight-through cable or a crossover cable and must be properly terminated for your application (see figure 6). • Crossover cable — Direct connection between the computer and the media player • Patch (straight) cable — Connection of the media player to an Ethernet LAN Crossover Cable Straight-through Cable Pins: 12345678 End 1 End 2 End 1 End 2 Pin Wire color Wire color Pin Wire color Wire color 1 White-green White-orange 1 White
ملخص المحتوى في الصفحة رقم 17
Digital Inputs and Relays The Digital Inputs and Relays ports provides optically-isolated digital inputs and relay outputs that can be controlled by the show control software. See the “Programming Guide“ section for the MSVPP commands that activate or are issued by the these ports. NOTES: • By factory default, automatic reporting of Digital Inputs 1 through 4 is disabled. To enable reporting, use the Set input trigger on MSVPP command (see the “Programming Guide” section). • Use a single ca
ملخص المحتوى في الصفحة رقم 18
Power NOTE: Although the unit performs reliably while running on a single AC power supply, doing so defeats the dual-redundant power supply feature. Dual Redundant AC Power Input connectors — l Connect a standard IEC power cord between one rear panel AC Power Input connector and a 100 to 240 VAC, 50-60 Hz power source. Connect a second IEC power cord between the remaining AC Power Input connector and either an uninterruptible power source or a power source that is completely independent
ملخص المحتوى في الصفحة رقم 19
Operation This section describes the front panel operation of the JMP 9600, including: • Definitions • Front Panel Controls and Indicators • Menu System Overview Definitions The following terms, which apply to Extron media players, are used throughout this manual: • Digital Cinema Package (DCP) — A folder that contains all of the files necessary for the JMP 9600 to play a presentation. This folder can include reel files (video images and audio data), subtitle files, the composition playlist (
ملخص المحتوى في الصفحة رقم 20
Pre-roll period — A programmable interval before the presentation starts. As an example, pre-roll might allow audience members to take their seats after an announcement that the show has begun. Post-roll period — A programmable interval after the presentation ends. Select the Stop At option to set a stop point for the timecode and for the screen to go black. As an example, post-roll might allow the house lights to gradually brighten. Post-roll is also sometimes known as “run-on.” Front Pane
