ملخص المحتوى في الصفحة رقم 1
Cisco MGX 8800/8900 Series Hardware
Installation Guide
Releases 2.0 - 5.2
May 2006
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Text Part Number: OL-4545-01 Rev. H0
ملخص المحتوى في الصفحة رقم 2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
ملخص المحتوى في الصفحة رقم 3
CONTENTS About This Guide xxxiii Audience xxxiii Purpose xxxiii Organization xxxiii Conventions xxxiv Notes, Warnings, and Cautions xxxv Notes about Warnings xxxv Scope of this Guide xxxv New Hardware Introduced in Releases 4.0.10 through 5.3 xxxvi New Back Cards Introduced in Releases 4.0.10 through 5.3 xxxvii Documentation xxxvii Documentation Notes for these Product Releases xxxvii Related Documentation xxxviii User Guide—Order of Use xxxviii User Guide Titles and Descriptions xxxix Obtaini
ملخص المحتوى في الصفحة رقم 4
Contents Multiple Terms 1-5 Narrow Band and Cell Bus Service Modules 1-6 Overview of Card Slot Assignments, by Chassis 1-7 MPSM Slot Assignments and MPSM Licensing 1-15 Cisco MGX 8850 and MGX 8850/B Switches 1-15 Features 1-17 MGX 8850 (PXM1E) and MGX 8850/B (PXM1E) Switch Overview 1-17 MGX 8850 (PXM45) and MGX 8850/B (PXM45) Switch Overview 1-18 PXM45 Controller Card RAM and Software Release History 1-18 MGX 8850 and MGX 8850/B Card Compartment 1-19 MGX 8850 (PXM1E) and MGX 8850/B (PXM1E) Slo
ملخص المحتوى في الصفحة رقم 5
Contents MGX 8830 Cards Supported 1-50 MGX 8830 System Hardware Components 1-50 AC Power Supply Tray 1-51 APS Assembly 1-52 DC Power Entry Module (PEM) 1-54 Fan Tray 1-55 MGX 8830/B Redundancy Connector 1-57 Cisco MGX 8880 Media Gateway 1-57 Voice Switch Service Module Overview 1-57 MGX 8880 Media Gateway Overview 1-58 Features and Benefits 1-59 MGX 8880 Card Compartment 1-60 MGX 8880 Slot Assignments 1-61 MGX 8880 Cards Supported 1-63 MGX 8880 Hardware Components 1-66 AC Power Supply Tray 1-6
ملخص المحتوى في الصفحة رقم 6
Contents AXSM 2-13 Faceplate Features 2-16 Module Configurations 2-21 CESM 2-23 Faceplate Features 2-25 Module Configurations 2-26 FRSM 2-27 Faceplate Features 2-29 Module Configurations 2-33 FRSM-12-T3E3 2-34 Faceplate Features 2-35 Module Configurations 2-36 MPSM-8-T1E1 2-38 MPSM-T3E3-155 2-39 MPSM-16-T1E1 2-42 PXM1E 2-45 Module Configurations 2-48 Faceplate Features 2-50 PXM45 2-57 PXM45 Support on MGX 8850 (PXM45) or MGX 8850/B (PXM45) 2-57 PXM45 Support on MGX 8950 2-58 Faceplate Features
ملخص المحتوى في الصفحة رقم 7
Contents Back Cards 2-80 Card Slots 2-83 Faceplate Features 2-84 Module Configurations 2-87 VXSM OC-3/STM-1 Interface 2-88 VXSM T1/E1 Interface 2-88 VXSM T3 Interface 2-89 XM60 2-89 Faceplate Features 2-91 Back Cards 2-92 Back Cards for MGX 8850 (PXM1E/PXM45) or MGX 8850 (PXM1E/PXM45) Switches 2-92 Back Cards for MGX 8950 Switches 2-93 Back Cards for MGX 8830 Switches 2-95 Back Cards for MGX 8880 Media Gateway 2-96 12IN1-8S 2-98 BNC-2E3 2-99 BNC-2T3 2-100 BNC-3-T3E3 2-101 BNC-3T3-M 2-102 MCC-8
ملخص المحتوى في الصفحة رقم 8
Contents RJ45-FE 2-128 RJ48-8E1 and R-RJ48-8E1 2-129 RJ48-8T1 and R-RJ48-8T1 2-130 SCSI2-2HSSI/B 2-131 SFP-2-155 2-132 SFP-8-155 2-134 SMB-2-155-EL 2-136 SMB-4-155 2-137 SMB-6-T3E3 2-138 SMB-8E1 and R-SMB-8E1 2-139 SMB-8E3 2-140 SMB-8T3 2-141 SMFIR-1-155 2-142 SMFIR-1-622/C 2-143 SMFIR-2-622 and SMFIR-2-622/B 2-144 SMFIR-4-155/C 2-145 SMFIR-8-155-LC and SMFIR-8-155-LC/B 2-146 SMFLR-1-2488 and SMFLR-1-2488/B 2-147 SMFLR-1-622/C 2-148 SMFLR-2-622 and SMFLR-2-622/B 2-149 SMFLR-4-155/C 2-150 SMFLR
ملخص المحتوى في الصفحة رقم 9
Contents Card Installation and Replacement Suggestions 3-8 Hot Swapping Cards and Modules 3-8 Card Installation Guidelines 3-8 How Cisco MGX Systems are Shipped 3-10 Site Requirements for the MGX 8850 or MGX 8850/B Switch 3-10 Environmental Requirements 3-11 Seismic Anchoring 3-12 Shock 3-12 Vibration 3-12 Space 3-13 Temperature, Altitude, and Humidity 3-15 Ventilation 3-16 Power Requirements 3-17 AC Power 3-18 DC Power 3-19 Power Consumption Calculation Tables 3-20 Required Tools and Equipmen
ملخص المحتوى في الصفحة رقم 10
Contents AC Power 3-48 DC Power 3-48 Power Consumption Calculation Tables 3-49 Required Tools and Equipment 3-53 Site Requirements for the MGX 8880 Media Gateway 3-55 Environmental Requirements 3-56 Seismic Anchoring 3-56 Shock 3-56 Vibration 3-57 Space 3-57 Temperature, Altitude, and Humidity 3-60 Ventilation 3-60 Power Requirements 3-62 AC Power 3-63 DC Power 3-64 Power Consumption Calculation Tables 3-64 Required Tools and Equipment 3-67 Rack-Mounting Requirements 3-69 Unpacking the Box 3-6
ملخص المحتوى في الصفحة رقم 11
Contents Intracard APS Configurations 4-15 Intercard APS Configurations 4-17 Planning for Bulk Distribution 4-20 Planning for Advanced Software Features 4-21 Inverse Multiplexing over ATM (IMA) Configurations—MGX 8830, MGX 8850 (PXM45), and MGX 8850 (PXM1E) 4-21 CHAPTER 5 Installing the Cisco MGX Switch or Gateway 5-1 Installing the MGX 8850 (PXM1E/PXM45) Switch, MGX 8850/B or MGX 8880 Media Gateway 5-1 Installation Checklist 5-2 Installation Procedures 5-4 Special Installation Notes for the
ملخص المحتوى في الصفحة رقم 12
Contents Installation Procedures 5-52 Install Stability Plate for Seismic Anchoring 5-52 Ground the Frame Bonding Ground Connection for a Cisco-Supplied Rack 5-55 Measure Rack Space 5-57 Prepare for Rack Installation 5-58 Install the AC Power Supply Tray 5-61 Install the Air Intake Plenum 5-64 Install the Lower Fan Tray 5-64 Install the MGX 8950 Switch without a Mechanical Lift 5-65 Install the MGX 8950 Switch with a Mechanical Lift 5-74 Install the Upper Fan Tray 5-76 Install the Exhaust Plen
ملخص المحتوى في الصفحة رقم 13
Contents Connect the External Clock 5-130 Connect the Alarms 5-130 Connect the MP Connection 5-131 Connect the LAN1/2 Ports 5-132 Verify EMI Compliance 5-132 Installing the Ferrite Bead on the PXM-UI-S3/B Card 5-133 How to Install the Ferrite Bead 5-133 Installing the Ferrite Bead on Ribbon Connectors 5-135 Install the Ferrite Bead 5-135 First Time Power On Procedure for MGX Switches 5-137 Prerequisites 5-137 Tools Required 5-137 General Power On Sequence and Checkout 5-138 Specific Power On S
ملخص المحتوى في الصفحة رقم 14
Contents Replacing Processor Cards 6-21 Installing or Removing Redundancy Connectors 6-22 When to Install or Remove RCONs 6-22 Installing MGX 8850/B Redundancy Connectors 6-22 Installing MGX 8830/B Redundancy Connectors 6-24 Removing Redundancy Connectors 6-27 Installing and Removing the AXSM-XG Extender Connector 6-27 Installing the Extender Connector 6-27 Removing the Extender Connector 6-29 APPENDIX A Front Card Specifications A-1 Single-Height Service Module Specifications A-2 Double-Heigh
ملخص المحتوى في الصفحة رقم 15
Contents Alarm Connector Pin Assignments B-10 Connector Pin Functions for Audio and Visual Alarms B-10 Pin States for Each Alarm State B-11 Power Cabling B-11 AC Power Cabling—MGX 8850 (PXM1E/PXM45), MGX 8850/B and MGX 8880 B-12 AC Power Cabling—MGX 8950 B-12 AC Power Cabling—MGX 8830 and MGX 8830/B B-12 DC Power Cabling B-13 DC Power Connections B-14 Redundancy Y-Cable B-14 Y Cables for MGX 8850 (PXM1E/PXM45), MGX 8850/B and MGX 8880 B-14 Y Cables for MGX 8950 B-15 Trunk Cabling B-16 T3 Trunk
ملخص المحتوى في الصفحة رقم 16
Contents Bonding and Grounding MGX 8800 or MGX 8900 Series Chassis in a Rack C-9 Wiring a Mixed Ground System with Redundant Supplies C-9 Conductor Characteristics for Carrying Current and Ensuring Low Voltage Drops C-11 APPENDIX D Guide to Transceivers (SFPs) Used with MGX Back Cards D-1 GLOSSARY INDEX Cisco MGX 8800/8900 Series Hardware Installation Guide xvi Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
ملخص المحتوى في الصفحة رقم 17
FI G U RE S Figure 1-1 Cisco MGX Switch Family 1-1 Figure 1-2 MGX 8880 Media Gateway 1-2 Figure 1-3 Bay and Line Numbers in an MGX 8850 Switch 1-6 Figure 1-4 RCON Installed in MGX 8850/B Chassis (Chassis Rear View) 1-16 Figure 1-5 Cisco MGX 8850 (PXM1E) or MGX 8850/B (PXM1E) Slot Assignments—Front View 1-20 Figure 1-6 MGX 8850 (PXM1E) or MGX 8850/B (PXM1E) Switch Slot Assignment—Rear View 1-21 Figure 1-7 Cisco MGX 8850 (PXM45) Switch Slot Assignments—Front View 1-22 Figure 1-8 Cisco MGX 8850 (
ملخص المحتوى في الصفحة رقم 18
Figures Figure 1-32 MGX 8830 or MGX 8830/B Slot Assignments—Front View 1-49 Figure 1-33 MGX 8830 or MGX 8830/B Slot Assignments—Rear View 1-49 Figure 1-34 Hardware Component Locations for a MGX 8830 or MGX 8830/B Switch—Front View 1-50 Figure 1-35 Optional AC Power Supply 1-51 Figure 1-36 MGX-8830-APS-CON 1-52 Figure 1-37 APS Assembly Example (MGX-8830-APS-CON) 1-53 Figure 1-38 DC PEM Faceplate 1-54 Figure 1-39 Polarities at the MGX 8830 or MGX 8830/B PEM Pluggable Terminal Block 1-54 Figure 1
ملخص المحتوى في الصفحة رقم 19
Figures Figure 2-14 FRSM-12-T3E3 Faceplate 2-35 Figure 2-15 Card Set Redundancy Configuration—FRSM-12-T3E3 Cards 2-37 Figure 2-16 MPSM-8-T1E1 Faceplate 2-38 Figure 2-17 MPSM-T3E3-155 Faceplate 2-41 Figure 2-18 MPSM-16-T1E1 Faceplate 2-45 Figure 2-19 Card Set Redundancy Configuration—PXM1Es 2-49 Figure 2-20 1+1 Card and APS Line Redundancy Configuration—PXM1Es 2-49 Figure 2-21 1:1 APS Line Redundancy Configuration—PXM1Es 2-50 Figure 2-22 PXM1E-4-155 Faceplate 2-52 Figure 2-23 PXM1E-8-155 Facepl
ملخص المحتوى في الصفحة رقم 20
Figures Figure 2-49 MCC-16-E1-1N Faceplate 2-105 Figure 2-50 MGX-1GE Faceplate 2-107 Figure 2-51 MGX-2GE Faceplate 2-108 Figure 2-52 MGX-1OC12POS-IR Faceplate 2-109 Figure 2-53 MGX-2OC12POS-IR Faceplate 2-110 Figure 2-54 MGX-RJ45-5-ETH Faceplate 2-111 Figure 2-55 MGX-RJ48-8E1 Faceplate 2-112 Figure 2-56 MGX-XF-UI Faceplate 2-113 Figure 2-57 MGX-XF-UI/B Card—Side View 2-114 Figure 2-58 MGX-XF-UI/B Faceplate 2-115 Figure 2-59 MMF-4-155/C Faceplate 2-116 Figure 2-60 MMF-8-155-MT and MMF-8-155-MT/
