Philips FWD397/98 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

FWD397/98
Use this simple and quick way to watch
your favourite DVD movie and enjoy
your Home Cinema experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If your TV has S-Video or Component (PR
PB Y) video jacks, use one of these video
connections instead for higher picture quality.
If your TV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can

ملخص المحتوى في الصفحة رقم 2

AV I N Make sure your DVD system and TV are connected and turned on! Plug & Play 1 Turn on the system. “AUTO INSTALL PRESS PLAY” will be displayed. 2 Press 2; on the system to start installation. Playing a disc 3 Press DISC1/2/3 on the remote control. You can also select the DISC on the front panel. 4 Turn on the TV and select the correct Video mode. You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system). 5 Press OPEN/CLOSE on the front of the DVD system