ملخص المحتوى في الصفحة رقم 1
LABYRINTH
LABYRINTH
LABYRINTH
LABYRINTH
LABYRINTH
LABYRINTH
LABYRINTH
LABYRINTH
COMPACT COMPONENT SYSTEM
CA-V908T/MX-V608T/MX-V688T
Consists of CA-V608T and SP-V608 Consists of CA-V688T and SP-V688
CA-V608T SP-V608 CA-V688T SP-V688
MX-V608T
MX-V688T
PROGRAM PROGRAM PROGRAM
/RANDOM /RANDOM /RANDOM
DISC DISC DISC
REPEAT REPEAT REPEAT
DISC DISC DISC
EDIT EDIT EDIT
DISC DISC DISC
DISPLAY DISPLAY
DISC 1 DISC 2 DISC 3 DISC 1 DISC 2 DISC 3 DISC 1 DISC 2 DISC 3
PRO LOGIC 3CH LOGIC TEST TONE SLEEP SLEEP
ملخص المحتوى في الصفحة رقم 2
Warnings, Cautions and Others Avisos, precauciones y otras notas Advertências, precauções e outras notas Caution –– switch! IMPORTANT for the U.K. Disconnect the mains plug to shut the power off completely. The DO NOT cut off the mains plug from this equipment. If the switch in any position does not disconnect the mains line. The plug fitted is not suitable for the power points in your home power can be remote controlled. or the cable is too short to reach a power point, then obtain an appropr
ملخص المحتوى في الصفحة رقم 3
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE PARA PRODUTOS LASER / / REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS / 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLO- 2 WARNING LABEL, PLACED INSIDE THE UNIT SURE 1 ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE 2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTE- RIOR DE LA UNIDAD POSTERIOR DE LA CAJA 1 ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE 2 ETIQUETA DE ADVERTÊNCIA
ملخص المحتوى في الصفحة رقم 4
Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Precaución: el aparato debe estar bien ventilado Para evitar posibles riesgos de descargas eléct
ملخص المحتوى في الصفحة رقم 5
Thank you for purchasing the JVC Compact Component System. We are proud to serve you and we hope this valued addition to your home will give you years of enjoyment. Please read this instruction manual carefully before operating your new stereo system. For questions that are not answered in the manual, kindly refer to your dealer. How This Manual Is Organized In this manual we have incorporated some special features : • Basic information that is the same for many different functions is grouped in
ملخص المحتوى في الصفحة رقم 6
Table of Contents Programing the Playing Order of the Tracks .............................. 27 How This Manual Is Organized .................................................... 1 Checking the Program .......................................................... 28 IMPORTANT PRECAUTIONS ................................................... 1 Changing the Program.......................................................... 28 Random Play ....................................................................
ملخص المحتوى في الصفحة رقم 7
Getting Started Accessories Check that you have all of the following items, which are supplied with the Unit. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) Video cord (1) AC Plug Adaptor (except for Hong Kong and the people's republic of China) (1) If any of these items is missing, contact your dealer immediately. Setting the Voltage Selector To avoid damaging the System, set the voltage before plugging in the Unit. Set the correct voltage for your area with the Voltag
ملخص المحتوى في الصفحة رقم 8
CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna Extend the supplied FM Wire Antenna horizontally. FM Wire Antenna Using an FM 75-Ohm Antenna Cable (not supplied) If reception is poor, connect the outside antenna. Outside FM Antenna Wire 2 13 Before attaching a 75-ohm coaxial lead (the kind with a round wire going to an outside antenna), disconnect the supplied FM Wire Antenna. CAUTION: To avoid noise, keep
ملخص المحتوى في الصفحة رقم 9
CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the Front Speakers Refer to instructions for speakers as well when you connect speakers. For each speaker, connect the red (+) and black (–) cords to the red (+) and black (–) terminals on the back of the Unit. SPEAKERS CA-V908T FRONT RIGHT LEFT + + – – Right Speaker Left Speaker SPEAKERS MX-V608T/MX-V688T RIGHT LEFT + + – – Right Speaker Left Speaker IMPORTANT: Use speakers with the correct impedance only
ملخص المحتوى في الصفحة رقم 10
Connecting Auxiliary Equipment VCR or other equipment You can connect the following equipment to this System. • TV with a video input jack: used as a monitor of video CD playback. • Audio/Video equipment. Note : • Connect the VIDEO OUT jack at the back panel of the System to the video input jack on the TV via the supplied video cord. • Connect the AUX jacks to the audio input and output of Audio/Video equipment. • The AUX OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER,
ملخص المحتوى في الصفحة رقم 11
COMPU PLAY COMPU PLAY is JVC’s feature that lets you control the most frequently used functions of the System with a single touch. One Touch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the play button for that function. What One Touch Operation does for you is to turn the power on, then start the function you have specified. If the Unit is not ready, such as no CD or tape in place, the Unit still powers on so you can insert a CD or tape. How One T
ملخص المحتوى في الصفحة رقم 12
Common Operations PROGRAM /RANDOM DISC SET REPEAT DISC EDIT MULTI CONTROL DISC STANDBY indicator SOUND MODE CA-V908T TIMER/CLOCK PHONES PRO LOGIC SEA CONTROL / 3CH LOGIC CANCEL/DEMO S.A.BASS S.A. BASS VOLUME MX-V608T/688T AUX DISPLAY DISPLAY S.A.BASS S.A. BASS DISC 1 DISC 2 DISC 3 Display PRO LOGIC 3CH LOGIC TEST TONE SLEEP ONSCREEN SOUND CENTER –+ LEVEL CENTER MODE MODE SOUND MODE indicator SOUND MODE REAR FM MODE V.INTRO –+ /ECHO LEVEL DELAY TIME REAR LEVEL HIGHLIGHT FM/AM L BALANCE R S.A.
ملخص المحتوى في الصفحة رقم 13
Setting the Clock Before operating the unit, set the correct time. 1 You can set the clock whether the Unit is on or off. 1. Press TIMER/CLOCK. The hour digit begins flashing. Flashing 2. Press 4 or ¢ on the MULTI CONTROL 2 , 4 to set the hours. Press ¢ to increase the hour. Press 4 to decrease the hour. Holding down continuously changes the hour setting more rapidly. 3. Press SET. The minute digits begin flashing. 4. Press 4 or ¢ on the MULTI CONTROL Flashing 3 , 5 to set the minutes. Press ¢
ملخص المحتوى في الصفحة رقم 14
CAUTION: The Volume cannot be adjusted while the Unit is on STANDBY. DO NOT turn on the Unit and/or start playing any source without setting the VOLUME control to 0; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones. For private listening Connect a pair of headphones to the PHONES jack. No sound comes out of the front speakers. Be sure to turn down the volume before connecting or putting on headphones. Balance Adjustment ———————————————————— You can use the
ملخص المحتوى في الصفحة رقم 15
Sound Modes The System has some preset sound effects that give you control of the way your music sounds, so you can tailor it for your room and for the quality of the source. We can give you some idea of how each one affects the music, but the only way to really tell is to try them yourself. You can also create up to three of your own customized S.E.A. (Sound Effect Amplifier) settings and store them in the Unit’s memory (MANUAL 1, MANUAL 2 and MANUAL 3). The preset sound modes include modes usi
ملخص المحتوى في الصفحة رقم 16
4. Press SET. “MANUAL 1” appears on the display. 5. Press 4 or ¢ on the MULTI CONTROL to select the MANUAL number for the memory. 6. Press SET again. “MEMORY” appears for 2 seconds. The setting that has been created is stored in the memory. The adjustment you have made will apply to the sound you hear. If you store new settings to a memory number that has already been used, the new settings replace the existing setting. When Rear Speakers are Connected (CA-V908T) If the optional rear speakers ar
ملخص المحتوى في الصفحة رقم 17
Changing the Display (MX-V608T/MX-V688T) The display normally indicates each source, but it can be switched to the clock time. Press DISPLAY. Each time you press the button, the source and the clock time are shown alternately on the display. j Source (example) Clock time The clock indication can be interchanged with the source indication using the Unit or remote control. The clock indication may change to source indication depending on the operation of the Unit. Listening to Auxiliary Equipment
ملخص المحتوى في الصفحة رقم 18
Dolby Surround (CA-V908T) PROGRAM /RANDOM DISC REPEAT DISC EDIT DISC PRO LOGIC / 3CH LOGIC Operation buttons DISC 1 DISC 2 DISC 3 PRO LOGIC 3CH LOGIC TEST TONE SLEEP ONSCREEN SOUND CENTER –+ LEVEL CENTER MODE MODE REAR FM MODE V.INTRO –+ /ECHO LEVEL DELAY TIME Display HIGHLIGHT FM/AM L BALANCE R S.A.BASS Dolby Surround indicator REC PAUSE SHIFT A TAPE A TAPE TAPE B AUX SHIFT B SELECT STILL SHIFT B FADE MUTING RETURN CD REPEAT + NEXT VOLUME PREV – KEY CONTROL When the System is being used, th
ملخص المحتوى في الصفحة رقم 19
Preparing the Dolby Surround To use the Dolby Surround,you need to prepare the various settings. These settings are set using the remote control. The Dolby Surround settings are: Center Speaker Mode Center Speaker mode contains the following four settings. PHANTOM: Select this setting if you have not connected a center speaker. The left and right front speakers project the sound to give the effect of a center speaker. (PRO LOGIC only) NORMAL: Select this setting if you are using a small center s
ملخص المحتوى في الصفحة رقم 20
Getting Ready to Use Dolby Pro Logic Speaker Arrangements for Dolby Pro Logic———————— Layout when using the center speaker and Layout when using the rear speakers rear speakers TV TV Front Front Front Front Speaker Speaker Speaker Speaker Center Speaker Rear Rear Rear Rear Speaker Speaker Speaker Speaker Setting-up Dolby Pro Logic ———————————————— Perform the steps below using the buttons on the remote control. SHIFT B 1. Press and hold SHIFT B during following procedures. 2. Press PRO LOGIC (1)
