Extron electronic DMP 64 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DMP 64 Setup Guide
™
This guide provides basic instructions for an experienced technician to install the DMP 64 ProDSP Digital Matrix Processor.
Where possible in the following pages, line drawings and photos from an actual installation are used to clarify steps
discussed in the text. Where appropriate, images have one or more numbers corresponding to a specific step described.
Chapter number and titles reference the DMP 64 User's Manual found at www.extron.com.
Step 1 — Disconnect power

ملخص المحتوى في الصفحة رقم 2

DMP 64 Setup Guide, Continued Step 8 — Wire the power supply Wire the included power supply using the diagram on the right. Plug Smooth Ridges 2-Pole Orange the captive screw connector into the DMP 64 power jack ( ) j Captive Screw Connector Step 9 — Power up the DMP 64 (12V) Power up the input and output devices, then connect power to the DMP 64. Power Supply Output Cord Step 10 — Install the software There are no hardware controls for the DMP 64. All configuration and control is done v