Sharp AN-PH40EZ دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

WARNING: This installation manual is for use by
service personnel. Please be aware that the
manufacturer cannot be responsible for breakage
12
or damage incurred due to improper installation of
this lens or use of the projector.
Installation Manual
Loosen the lamp replacement Remove the mounting screws of
When replacing the lens, please have the lens replaced by
the store of purchase or a Sharp Engineering certified
screw (11111) that fastens the lamp the top cover.
service workshop. The inside

ملخص المحتوى في الصفحة رقم 2

7 8 9 10 Remove the lens mounting Pull out the lens towards you and Remove the lens cap (on the Insert the replacement lens into screws. then take out the lens (2 222 2) by ro- back) from the replacement lens. the lens mount with the motor tating it 90 degrees (11111) in the di- • This explanation uses the example of the section facing up. AN-PH10EX. rection shown by the arrow. Lens mount Positioning pin Lens mounting screws Motor section 1 2 Lens cap (back) 11 12 13 14 (When the lens being atta