Sherwood 5227-00000-041-0S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

QUICK START GUIDE
This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.
For full details on using this unit, refer to the main operating instructions.
Please be certain that this unit is unplugged from the AC outlet before making any connections.
Placing Speakers
If you have 5.1 ch speakers If you have 7.1 ch speakers
1. Front Left
2. Front Right
3. Center
4. Surround Left
5. Surround Right
6. Subwoofer
7. Surround Back Left
8. Surround Bac

ملخص المحتوى في الصفحة رقم 2

Connecting TV & DVD Player Connecting a TV • Connect the TV to the same type of Monitor video output that you did connect to the DVD player, as shown. Connecting a DVD Player • Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video output on your DVD player, as shown. • Use an Optical or Coaxial cable to connect this unit's OPT IN 2 or COAX IN 2 to the optical output or the coaxial output on your DVD player. (You don't need to do both.)

ملخص المحتوى في الصفحة رقم 3

QUICK START GUIDE Turning on the Unit • Before using the remote control, first press the [AUD] button to control this unit. • To use the RF remote control function in some countries such as U.S.A., Canada, etc., refer to "Changing the transmission signal", etc. on the main operating instructions. 1. Connect the AC input cord. 2. Press the [POWER] switch on the front panel to enter the standby mode. 3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on

ملخص المحتوى في الصفحة رقم 4

Enjoying Surround Sound 2 1 3 3 2 1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode or the manual surround mode. Auto Surround Mode : The optimum surround mode will be automatically selected depending on the signal format ([AUTO]) lights up) being input. Manual Surround Mode : You can select the desired of different surround modes selectable for the signal being ([AUTO]) goes off) input with using the [MULTI CONTROL] knob or the [SURROUND