ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
CONTENTS TABLE DES MATIÈRES Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s Merci d'avoir choisi un produit Jensen . Nous espérons que vous allez trouver les instructions manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to dans ce guide de propriétaire claires et faciles à suivre . Prenez quelques minutes à le use all the features of your new Jensen VM9511TS Mobile Multimedia AM/FM/DVD Receiver co
ملخص المحتوى في الصفحة رقم 4
ii
ملخص المحتوى في الصفحة رقم 5
VM9511TS PREPARATION Congratulations on your purchase of the Jensen VM9511TS XM Ready • Single Subwoofer RCA output Mobile Multimedia AM/FM/DVD Receiver. • Requires optional Terk XMD1000 tuner box • Center Channel RCA pre-amp output (variable) • Requires optional Terk XMDJEN100 or Jensen JXMC XM • 1-pair headphone/Multi-ZONE RCA outputs It’s a good idea to read all of the instructions before beginning cables • 1-pair auxiliary RCA A/V inputs the installation. We recommend having your Jensen •
ملخص المحتوى في الصفحة رقم 6
VM9511TS WARNING! Never use irregular discs. WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. WARNING! Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire. WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually. Optional Accessories 3 iAUX READY (Sol
ملخص المحتوى في الصفحة رقم 7
VM9511TS WIRING DIAGRAM 3
ملخص المحتوى في الصفحة رقم 8
VM9511TS WIRING DIAGRAM - MULTIMEDIA CONNECTIONS *TERK XMDJEN100 cables (sold separately) **TERK XMD1000 Direct Tuner and antenna (sold separately) ***NAV100 (sold separately) 4
ملخص المحتوى في الصفحة رقم 9
VM9511TS INSTALLATION Pre-installation FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 4. Place the radio in front of the dashboard opening so the 2. Remove the transport screws. wiring can be brought through the mounting sleeve. PREPARE RADIO Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there
ملخص المحتوى في الصفحة رقم 10
VM9511TS CONTROLS AND INDICATORS Button Operation 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/ PICTURE Press to adjust the display aspect of the picture to one of three settings: Cinema, Full, Normal or OFF. Press and hold to access picture settings. 3. ( ) Press to adjust the upward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust the upward ti
ملخص المحتوى في الصفحة رقم 11
VM9511TS CONTROLS AND INDICATORS 10. 3/SCN DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station channel 3. Press and hold to store the current radio station in preset channel 3. 11. 4/RPT DVD Mode: Press once to start repeat playback. TUNER Mode: Press once to play preset radio station channel 4. Press and hold to store the current radio station in preset channel 4. 12. 5/2-6CH/RDM DVD Mode: Press once for random playback. TUNER Mode: Press once to
ملخص المحتوى في الصفحة رقم 12
VM9511TS CONTROLS AND INDICATORS LCD Display/Indicators 1. Disc Indicator Illuminated when disc is loaded 2. DVD Playback Indicators (SCN/RPT/RDM/ALL) The following DVD playback indicators become Illuminated when the corresponding function is active: • SCN: scan playback • RPT: repeat playback 1 2 3 4 5 6 • RDM: random playback • ALL: playback all chapters 3. Loudness Indicator (LOUD) The loudness indicator becomes illuminated when the LOUD function is activated. 4. Main Display The main
ملخص المحتوى في الصفحة رقم 13
VM9511TS FRONT ZONE REMOTE CONTROL NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 9
ملخص المحتوى في الصفحة رقم 14
VM9511TS Table 1: Front Zone Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 TV XM iPod MENU 1 Enters the main menu of Turns on PBC when Displays XM Setup Menu Selects Photo mode the disc playing VCD TITLE 2 Enters the title menu of Plays first ten seconds of Selects Music mode the disc each chapter/title MUTE 3 Toggles on/off audio out- Toggles on/off audio out- Toggles on/off audio out- Toggles on/off audio out- Toggles on/off audio out- Toggles on/off audio out- Toggle
ملخص المحتوى في الصفحة رقم 15
VM9511TS Table 1: Front Zone Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 TV XM iPod GOTO 21 Goes to specific time Goes to specific time frame and playback frame and playback 22 Slow playback/slow Slow playback/slow rewind playback rewind playback ZOOM 23 Zooms in/out on an Zooms in/out on an image image PIC 24 Displays set-up parame- Displays set-up parame- ters ters OPEN/ 25 Opens/closes the TFT Opens/closes the TFT Opens/closes the TFT Opens/closes the TFT Opens/
ملخص المحتوى في الصفحة رقم 16
VM9511TS MULTI-ZONE REMOTE CONTROL Table 2: Multi-Zone Remote Control Functions Button Function Name Ref # DVD VCD MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 Toggles on/off audio output Toggles on/off audio output AUDIO 5 Switches the audio language for disc playback REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback of each chapter/title/disc
ملخص المحتوى في الصفحة رقم 17
VM9511TS USING THE TFT MONITOR “COLOR”, “CONTRAST”, and “TINT” you must be in AUX, Open/Close TFT Monitor Aspect Ratio CAMERA or TV Tuner mode. Open TFT Monitor Press the DISP button (28) on the remote control or WIDE/ PICTURE button (2) on the monitor to adjust the aspect ratio Press the OPEN button (1) on the front panel or press the as follows: NOTE: The default adjustment is “0” in PAL mode. Tint is ( ) button (25) of the front zone remote control to activate unavailable for adjustment
ملخص المحتوى في الصفحة رقم 18
VM9511TS d. Video should be displayed on the TFT monitor within 1 ~ 2 seconds. Monitor Movement Mechanism If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor: Table 4: Monitor Protective Measures Self OPEN Button Power Obstruction Protection Pressed Reconnected Monitor load- Monitor is auto- Monitor fully Monitor is auto- ing out hori- matically extended hori- matically zontally loaded into unit
ملخص المحتوى في الصفحة رقم 19
VM9511TS OPERATING INSTRUCTIONS To program a specific volume level, push and hold the VOL/ The Loud function compensates for deficiencies in sound ranges at Power On / Off LO/DX knob (6) while the yellow volume bar is displayed on low levels. Loudness levels range from 1-4 or “off”. When the Loud Press the /MUTE button (7) to turn the unit on. The buttons on the the screen. The unit will beep two times to confirm your turn- function is on, “LOUD” is displayed on the screen. front of the unit
ملخص المحتوى في الصفحة رقم 20
VM9511TS SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL Adjusting a Feature Table 7: General Setup Menu Features SETUP” are available for adjustment. Setup can be 1. Enter the option field for the feature you want to adjust Setting Options Function performed by pressing the dedicated button on the remote by pressing the >/|| button (18) on the remote or by control or by touching the top left corner of the TFT screen. pressing the ENTER (joystick) button (20) on the unit. A
