AMX Endeleo Multi-Format Receiver UDM-RX01 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
UDM-RX01 Endeleo Multi-Format Receiver
Configuration
Overview
The UDM-RX01 is configured via the UDM Hub’s WebConsole. Refer to the UDM
Installed at the display device, the UDM-RX01 (FG-UDM-RX01) converts the signal
Hub’s Operation/Reference Guide for details.
received from a UDM Multi-Format Distribution Hub to standard A/V signals (FIG. 1).
Rear Panel Components
All of the connectors and ports are located on the rear panel (FIG. 2):
Composite (Pr) port
Composite (Pb) por

ملخص المحتوى في الصفحة رقم 2

Composite Input at Display Device System Overview 1. Attach the composite cable (normally yellow) to the CVBS connector on the FIG. 3 provides a basic system diagram representing a UDM Hub, UDM-RX01 UDM-RX01. Receiver, and connected devices: 2. Run the other end of the composite cable to the Composite connector (nor- mally yellow) on the display device. Connect firmly. DVD DSS 3. If appropriate connect audio to the audio connectors on the UDM-RX01. SVideo Input at Display Device Video Out Aud