AMX DAS-T0804X/8X-SIG دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
DAS-T0804X/8X-SIG Tango Zone Expanders
Rack-Mounting
Overview
Tango units occupy two rack spaces in a standard 19" equipment rack. Rack
Tango Zone Expanders (FIG. 1) are used to expand the number of zones in the
mounting brackets are supplied with the optional Rack-Mount Installation Kit
system beyond the 4 or 8 that are available using the Tango Audio Controllers.
(FG1101-60).
Note: Exercise extreme care when lifting or moving Tango units within the rack
to avoid injury.

ملخص المحتوى في الصفحة رقم 2

3. Connect the source inputs. Patch each source from the source output on Connecting Zone Outputs the Tango controller to the source inputs on the Zone Expander. Tango Controllers can be accessed by SWT Metreau keypads (DAS- Note: Ensure the left and right source connections are properly matched MET6SRC and DAS-MET-NUM) to provide basic transport control, source and seated to the left and right terminals of the both the Tango Controller selection and volume up and down, as well as enhanced