Rolls RA2100b دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SPECIFICATIONS
Power Output, Stereo: 100 Watts RMS/ch. 4 Ω
70 Watts RMS/ch. 8 Ω
Bridged - 200 Watts RMS or 70 Volt 8 Ω
Input Connectors: 1/4" TRS balanced and RCA
Output Connectors: 5-way binding posts
Sensitivity: <1 VRMS for full output
THD: <.08% (1kHz @ 1 Watt)
S/N Ratio: 106 dBU
Power Bandwidth: 50 Hz - 25 kHz, +/- 1 dB
Damping Factor: > 150
Slew Rate: 100 Volts/microSecond
Phase Shift: <10 Deg., 20Hz - 20kHz
Input Impedance: 10 K Ω Balanced
Power: 120 VAC 60Hz 2.5A
230 VAC 50Hz
Size: 19”

ملخص المحتوى في الصفحة رقم 2

INTRODUCTION whenever the output stage is called upon for too much power, it may also be Thank you for your purchase of the ROLLS RA2100b Power Amplifier. The fooled by impedances lower than four ohms - which may cause the output stage RA2100b is a stereo 100W/channel RMS power amplifier in a standard 2 rack to overheat and burn up the MOSFETs. space format. It is intended for professional audio and distributed musical applica- Since the RA2100b is convection cooled, the unit radiates heat from