ملخص المحتوى في الصفحة رقم 1
LK85/140
STEREO POWER AMPLIFIER
OWNER'S MANUAL
ملخص المحتوى في الصفحة رقم 2
BLANK
ملخص المحتوى في الصفحة رقم 3
Important safety information Explanation of symbols used in this manual and on the product: This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock. This symbol is intended to alert the user to the presence of important maintenance and servicing information in the instruction and service manuals. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS I
ملخص المحتوى في الصفحة رقم 4
ii
ملخص المحتوى في الصفحة رقم 5
UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION Fuse replacement This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug contains a 5 Amp fuse. If the fuse has blown it can be replaced as follows: a) Pull out the red fuse cover/carrier. b) Remove and dispose of the blown fuse. c) Fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier back into the plug. Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact
ملخص المحتوى في الصفحة رقم 6
CE Declaration of Conformity Linn Products Ltd declare that this product is in conformance with the LowVoltage Directive 73/23/EEC and Electromagnetic Compatibility 89/336/EEC as amended by 92/31/EEC and 93/68/EEC.The conformity of the designated product with the provisions of Directivenumber 73/23/EEC (LVD) is proved by full compliance with the followingstandards: Standard number Date of issue Test type EN 60065 1998 General requirements Marking Hazardous radiati
ملخص المحتوى في الصفحة رقم 7
Contents Introduction ........................................ 1 The LK85/140 and music ........................................ 2 Setting up the LK85/140 ........................................ 5 Unpacking ........................................ 5 Positioning ........................................ 6 Connecting ........................................ 7 Operation ........................................ 8 Protection ........................................ 9 Guarantee and service ..........
ملخص المحتوى في الصفحة رقم 8
Copyright and acknowledgements Copyright © Linn Products Limited. Linn Products Limited, Floors Road, Waterfoot, Glasgow, G76 0EP, Scotland, United Kingdom. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. Printed in the United Kingdom. LK85 and LK140 are trademarks of Linn Products Limi
ملخص المحتوى في الصفحة رقم 9
Introduction We believe that good music is not a luxury, but a necessity, and we at Linn have dedicated the better part of two decades to making sure that our customers are given the best possible experience of the music they love. In other words, we take music seriously, which is why we dedicate ourselves to building hi-fi which sets the highest possible standards in bringing music to life within your home. Listening to your new Listening to your new Linn hi-fi system should be the nearest you
ملخص المحتوى في الصفحة رقم 10
The LK85/140 and music The LK85 and LK140 are rugged high output amplifiers designed for ease of use and purity of sound. You can build exactly the system you want, using one or more LK85/140 amplifiers. The LK85 gives 85W per channel into 4, or 62W per channel into 8, and so is ideal for most average-sized rooms. Alternatively, additional power is available from the LK140, which gives 140W per channel into 4, or 95W per channel into 8. The LK85/140 comes in a durable compact case built to l
ملخص المحتوى في الصفحة رقم 11
The LK85/140 is direct-coupled and servo-controlled to produce the clearest sound and the toroidal transformer is fully shielded to prevent hum when the amplifier is stacked with other products. The LK85/140 provides two input sockets to make it easy to daisy chain multi-amplifier systems, allowing you to boost the output power of your system, or take advantage or bi-amping and tri-amping. Loudspeakers can be bi-wired to the LK85/140 by the use of the two loudspeaker sockets to obtain even highe
ملخص المحتوى في الصفحة رقم 12
For more performance, you can use two or three LK85/140s to bi-amp or tri-amp to the loudspeakers, each amplifier driving the bass, midrange, and treble signals separately. 4 When bi-amping or tri-amping the highest possible performance can be obtained by removing the passive crossover units from the loudspeaker and fitting active crossover modules to the LK85/140 to accurately divide the signal into the appropriate frequency bands. This is known as active playback. The LK85/140 is designed to b
ملخص المحتوى في الصفحة رقم 13
Setting up the LK85/140 This chapter explains how to unpack your Linn LK85/140 Stereo Power Amplifier, and how to install it with your other hi-fi components. Unpacking Before connecting the LK85/140 to the mains supply, you should check the following: • that everything is in the box • that the correct voltage has been selected • that the correct fuse has been fitted. 5 Accessories The LK85/140 comes in a box with the following accessories: • a mains lead • two phono to phono leads • two fuses f
ملخص المحتوى في الصفحة رقم 14
Replacing the fuse To replace the fuse, first identify the correct fuse for your local voltage. This should be: • 3.15A anti-surge for 230V • 6.3A anti-surge for 115V • 6.3A anti-surge for 100V (Japanese version). Pull open the fuse drawer at the bottom of the mains inlet, insert the fuse in the rear compartment, and close the drawer. Earthing the LK85/140 The earthed moulded mains lead supplied must always be used with the LK85/140. Never use an unearthed plug or adaptor. 6 Positioning You can
ملخص المحتوى في الصفحة رقم 15
Connecting The following diagram shows the connections for the rear panel of the LK85/140: RIGHT SPEAKER LEFT SPEAKER LINE LINE MAINS INPUT OUTPUTS OUTPUTS INPUTS OUTPUTS VOLTAGE SIGNAL DETECTOR SELECTOR SENSITIVITY Connecting the mains supply 7 Connect the LK85/140 to a mains supply using the mains cord supplied. Note that the LK85/140 should be switched off before connecting or disconnecting the plug on the rear panel, or you may generate surges which could damage other components in your hi-f
ملخص المحتوى في الصفحة رقم 16
Connecting the speakers The LK85/140 comes equipped with two pairs of speaker output sockets to allow bi-wiring. Alternatively, auxiliary speakers may be connected. Operation To turn on the LK85/140 amplifier, press the power switch on the front panel. Signal detector sensitivity The LK85/140 uses signal sense circuitry to detect the presence of an audio input signal. As soon as the amplifier detects the presence of an audio signal, it will power up and a small indicator light adjacent to the po
ملخص المحتوى في الصفحة رقم 17
By-passing the signal detector Depending on its configuration, the LK85/140 will remain on standby for 10 or 20 minutes after an input signal has been removed. You can override this facility by fitting an internal link which forces the amplifier to remain on as long as the mains power is connected. Please consult your Linn retailer for further details. Protection Like all Linn products, the LK85/140 is a rugged amplifier, designed and built to withstand most eventualities. To ensure safe operati
ملخص المحتوى في الصفحة رقم 18
Guarantee and service This product is guaranteed under the conditions which apply in the country of purchase. In addition to any statutory rights the customer may have, we undertake to replace any parts which have failed due to faulty manufacture. To help us, please ask your Linn retailer about the Linn warranty scheme in operation in your country. In the UK and other markets, extended warranty is offered to customers who register their purchase with Linn. A registration card can be obtained fro
ملخص المحتوى في الصفحة رقم 19
Technical information Specifications Output power 62W per channel into 8, 85W per channel into (230 Vac mains) 4 (LK85) 95W per channel into 8, 140W per channel into 4 (LK140) Input signal for 685mV rms (LK85) maximum output 870mV rms (LK140) Maximum output 18.5V rms (LK85) voltage 23.5V rms (LK140) Gain x27 (28.6dB) Input impedance 10K Frequency response (-3dB) 10Hz–70kHz 11 Output offset <5mV Signal sense threshold >150μV rms Standby power <5W consumption Maximum input power 350W (LK85) 5
ملخص المحتوى في الصفحة رقم 20
12
