Fender KXR 100 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

THE SOUND THAT CREATES LEGENDS
KEYBOARD
EXTENDED
RANGE
KXR
One hundred
TYPE: PR 262
,
Owners Manual
P/N 047761

ملخص المحتوى في الصفحة رقم 2

KXR 100 Owner’s Manual Congratulations on your purchase of the Fender KXR 100 The HEADPHONE jack automatically mutes the speaker while keyboard amplifier. The Fender KXR 100 is the most recent driving stereo or mono headphones for private practice effort in state of the art keyboard amplifier technology, and is sessions. The HEADPHONE jack can also be used as another a member of the FENDER KXR series. The design execution of line level output. RECORD OUT RCA jacks are provided to the KXR 100 was

ملخص المحتوى في الصفحة رقم 3

KXR 100 Front Panel Functions A. Channel 1 Input (XLR)- A high sensitivity, XLR style recording or sound reinforcement mixer. In addition, this output can be used to drive another KXR 100 as a slave amp. connector designed for use with microphones. This balanced input can handle as much as 1V R.M.S. This is done by connecting a standard guitar cord from the Effects Send jack of the master amp to the Effects Return jack of the slave amp. B. Channel 1 Input (Phone)- Plug-in connection for instrume

ملخص المحتوى في الصفحة رقم 4

KXR 100 Rear Panel Functions NOTE: DO NOT BLOCK THE AIR FLOW TO THE REAR PANEL; WARNING: THIS EQUIPMENT MUST BE GROUNDED. FOR EXAMPLE, BY BACKING THE AMPLIFIER UP AGAINST A WALL. The rear panel is used to keep the output devices from COVERING CARE- The exclusive vinyl covering on your getting too hot. cabinet has been especially designed for years of lasting beauty. A very light, soapy solution on a sponge may be used POWER CORD - This amplifier is equipped with a grounding to remove dirt and re

ملخص المحتوى في الصفحة رقم 5

KXR 100 Specifications Part Number: 120V Version: 22-8501 230V Version: 22-8561 Type Specification: PR 262 Power Requirements: 100V Version: 100VAC, 50/60 Hz, 360W Max. 120V Version: 120VAC, 60 Hz 360W Max. 230V Version: 230VAC, 50 Hz, 360W Max. 240V Version: 240VAC, 50 Hz, 360W Max. POWER AMPLIFIER SECTION: Power output: 80 watts R.M.S. Rated load impedance: 4 Ohms Distortion at 80 watts: Less than .1% @ 1kHz, before compression. less than 1% @ 1kHz, maximum compression. Sensitivity: 370mV R.M

ملخص المحتوى في الصفحة رقم 6

KXR 100 Block Diagram Notes A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP., CORONA, CA 91720