Extron electronic sHDMI DA2 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

HDMI DA2 • Setup Guide
Overview
The Extron HDMI DA2 distribution amplifier distributes one HDMI input signal to two
outputs simultaneously. This setup guide provides instructions for a basic installation by
an experienced installer. For complete instructions, see the HDMI DA2 User Guide, which is
available on the Extron web site (www.extron.com).
Front Panel
c
OUTPUTS
INPUT 12
EDID
SIGNAL
CONFIG
HDCP
HDMI DA2
ae b d
Power status LED — Lights green when power is applied to the unit.
a
USB Co

ملخص المحتوى في الصفحة رقم 2

HDMI DA2 • Setup Guide (Continued) 2. (Optional) Connect the USB or RS-232 connector (see the figure at right) to HDMI DA2 a PC for configuration and maintenance. Use SIS commands to configure REMOTE ® RS-232 EDID Minder , mute the video signal, mute the audio signal, adjust the video color bit depth, or monitor the signal and HDCP status, as required. See the “SIS Commands” section of the HDMI DA2 User Guide. TxRx G 3. Connect and power on the display devices to the rear panel HDMI outputs.