ملخص المحتوى في الصفحة رقم 1
Operation/Reference Guide
Tango Amplifiers
DAS-TAMP4-SIG
DAS-TAMP8-SIG
Initial Release: 3/28/2008
Tango Distributed Audio
ملخص المحتوى في الصفحة رقم 2
AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS b Tango Amplifiers
ملخص المحتوى في الصفحة رقم 5
Table of Contents Table of Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ a Tango Amplifiers ................................................................................................1 Overview .................................................................................................................. 1 Product Specifications ............................................................................................. 1 Rack Mo
ملخص المحتوى في الصفحة رقم 6
Table of Contents ii Tango Amplifiers
ملخص المحتوى في الصفحة رقم 7
Tango Amplifiers Tango Amplifiers Overview Where more than one pair of speakers is required in Tango Distributed Audio zones, the Tango Amplifier (FIG. 1) provides the extra power needed to drive up to 12 additional speaker pairs or 24 channels per zone. Use Tango Amplifiers in backyards, large rooms or other zones where additional speakers are needed. FIG. 1 Tango Amplifiers High-quality sound - delivers 60 watts of high-quality sound per channel. Includes an 8-channel amp that supports 4
ملخص المحتوى في الصفحة رقم 8
Tango Amplifiers Tango Amplifiers - Product Specifications (Cont.) Front Panel Components: Light Bar • Blue light bar indicates power status. Status LED • Blue LED lights when active Rear Panel Components: Power Switch & Receptacle The master power switch will remain in the ON position normally. Output 1-4: SWT connectors provide direct connection to speakers. From Controller: SWT input port (connects to an Mi-Series Audio Controller) To Keypad: SWT output port (connects to Matrix keypad or inte
ملخص المحتوى في الصفحة رقم 9
Rack Mounting Rack Mounting Overview Tango units occupy two rack spaces in a standard 19" equipment rack. Rack mounting brackets and screws are located in the accessories box supplied with the unit. Exercise extreme care when lifting or moving Tango units within the rack to avoid injury. It is recommended that you seek the assistance of another person when rack mounting Tango units. 1. Attach the rack mounting brackets to each side of the Tango unit using four M4 screws (supplied) for each b
ملخص المحتوى في الصفحة رقم 10
Rack Mounting 4 Tango Amplifiers
ملخص المحتوى في الصفحة رقم 11
Wiring and Connections Wiring and Connections Overview - Speaker Wire Technology (SWT) Speaker Wire Technology (SWT) allows both data and audio signals to travel over the same four conductor wire. This remarkable technology removes the need for control wire since the control and audio signals are shared on the same wire. The reliability and simplicity of this system has been proven for years. AMX Matrix Audio is the only company that offers a “retrofit solution”, one which allows the replacem
ملخص المحتوى في الصفحة رقم 12
Wiring and Connections Cabling Instructions This installation uses low voltage cabling similar to telephone and alarm wiring, and as such does not commonly have very many restrictions on their installation. However rules may vary in different regions. Be sure to check for any wiring restrictions required by the electrical code in your area. Cable Type The Tango Amplifier is cabled using standard 4-conductor speaker cable originating at the Tango Controller, passing through the Keypad, and te
ملخص المحتوى في الصفحة رقم 13
Wiring and Connections Connecting To a Tango Audio Controller Connect the Tango Amplifier to the Tango Audio Controller via the 4-pin connector labelled “From Controller” on the rear panel of the Amplifier. Connecting SWT Keypads Connect SWT Keypads (DAS-MET-6SRC or K-Series) to the Tango Amplifier via the SWT connector labelled “To Keypad” on the rear panel of the Amplifier. When stripping cable for use with SWT connector, only strip away about ¼” (6mm) of the insulation from each wire. The
ملخص المحتوى في الصفحة رقم 14
Wiring and Connections 8 Tango Amplifiers
ملخص المحتوى في الصفحة رقم 15
Wiring and Connections 9 Tango Amplifiers
ملخص المحتوى في الصفحة رقم 16
It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 � 469.624.8000 � 469-624-7153 fax � 800.932.6993 technical support � www.amx.com © 3/08 2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
