ملخص المحتوى في الصفحة رقم 1
HK
MD MINI SYSTEM MODEL
MD-C2H
OPERATION MANUAL
MD-C2H MD mini system consisting of
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please MD-C2H (Main unit) and CP-MDC2H (Speaker system).
read this manual carefully. It will guide you in operating
your SHARP product.
CONTENTS
Page Page
SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 CONVENIENT CD AND MD OPERATIONS . . . . . . . 27-30
PRECAUTIONS . . . . . .
ملخص المحتوى في الصفحة رقم 2
HK SPECIAL NOTES NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewire- Ensure that neither the brown nor the blue wire is con- able (moulded) plug incorporating a 3A fuse. Should the nected to the earth terminal in your three pin plug. fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as Before replacing the plug cover, make sure that: above, which is also indicated on the pin face of the p
ملخص المحتوى في الصفحة رقم 3
HK PRECAUTIONS ■ General ■ Care of compact discs ● Please make sure that the unit is positioned in a well ven- Compact discs are fairly resistant to damage, however mis- tilated area and that there is at least 10 cm (4") of free tracking can occur due to an accumulation of dirt on the disc space along the sides and back. There must also be a surface. minimum of 20 cm (8") of free space on the top of the Follow the guidelines below for maximum enjoyment from unit. your CD collection and
ملخص المحتوى في الصفحة رقم 4
NAMES OF CONTROLS AND INDICATORS ■ Front panel 11. (CD) Disc Skip Button 2 143 12. (CD) Select/Direct Play Buttons 13. (CD) Open/Close Button 14. (CD) Disc Tray 8 15. Surround Button 16. Extra Bass Button 5 9 17. Pre-programmed Equalizer Button 6 10 18. Timer Set Indicator 19. (MD) Record Stand-by Button 7 11 10. (TAPE) Record Stand-by Button 11. Dimmer Button 12 21 12. Programme Type/Traffic Information Search Button 13 14 15 16 17 18 19 20 13. EON Button 14. ASPM Button 15. Station Se
ملخص المحتوى في الصفحة رقم 5
(Continued) ■ Display window 11. (MD/CD) Random Play Indicator 1 10 11 12 13 14 15 12. Timer Play Indicator 2 16 13. Timer Record Indicator 25 14. (MD/CD) Repeat Indicator 6 17 3 15. (MD/CD) Play Indicator 26 7 18 16. Memory Indicator 4 27 17. (TAPE) Record Indicator 8 19 2021222324 18. (MD) Record Indicator 5 9 19. (MD/CD) Pause Indicator 10. Total Time Indicator 11. Extra Bass Indicator 12. Remaining Time Indicator 28 29 30 13. Surround Indicator 14. Sleep Indicator 15. Over Indicator
ملخص المحتوى في الصفحة رقم 6
(Continued) ■ Remote control 11. Remote Control Transmitter LED 1 12. Programme Type/Traffic Information Search Button 13. Station Selector Button 14. (TUNER) Preset Up/Down Buttons 15. (MD/CD) Clear Button 4 16. MD Time Button 2 17. (TAPE) Record Stand-by Button 9 18. (MD) Record Stand-by Button 3 19. (MD/CD) Select/Direct Play Buttons 5 10 10. (MD/CD) Memory Button 11. (MD/CD) Enter Button 6 11 12. (MD/CD) Track Down/Review Button 12 3 (TAPE) Rewind Button 7 13. (MD/CD) Track Up/Cue B
ملخص المحتوى في الصفحة رقم 7
HK PREPARATION FOR USE ● Unplug the AC power lead from the AC socket before con- necting or disconnecting any component. ■ Aerial connection 1 2 3 Supplied FM aerial Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial FM aerial Connect the AM loop aerial wire to the AM ANTENNA socket. AM loop aerial Position the AM loop aerial for optimum reception. Place the AM loop a
ملخص المحتوى في الصفحة رقم 8
(Continued) ■ Removing the speaker grilles 1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms. ■ Mounting the speaker grilles Fit the four posts on the speaker grille into the mounting holes and push them lightly with the palm of your hand to secure. ■ Placing the system 10 cm (4") 10 cm (4") ●
ملخص المحتوى في الصفحة رقم 9
(Continued) ■ Remote control ● When inserting or removing the batteries, push them towards the battery terminal. ● Installing the batteries incorrectly may cause the unit to mal- function. Precautions for battery use: ● 2 "AA" size batteries ● Insert the batteries according to the direction indicated in the (UM/SUM-3, R6, HP-7 battery compartment. or similar) ● Replace all old batteries with new ones at the same time. ● Do not mix old and new batteries. ● Remove the batteries if they a
ملخص المحتوى في الصفحة رقم 10
SETTING THE CLOCK 1 Press the ON/STAND-BY button to turn the power on. In this example, the clock is set for the 24-hour (0:00) system. 2 Press the CLOCK button. Jog dial 3 Within 5 seconds, press the ENTER button. CLOCK 4 Turn the jog dial to select the time display mode. "0:00" → The 24-hour display will appear. (0:00 - 23:59) "12:00 AM" → The 12-hour display will appear. ON/ (AM or PM 12:00 - 11:59) "0:00 AM" → The 12-hour display will a
ملخص المحتوى في الصفحة رقم 11
HK SOUND CONTROL ■ Volume (Main unit) (Remote control) (Main unit operation) When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will de- crease. (Remote control operation) Press the VOLUME button to increase the volume and the VOLUME button to decrease the volume. ● The volume display can be changed within the range of "0" to "40". ..... 01 2 38 39 40 ■ Pre-programmed equalizer (Remote control) (Main unit) (Main
ملخص المحتوى في الصفحة رقم 12
COMPACT DISC OPERATION ■ Loading and playing CDs 1 Press the ON/STAND-BY button to turn the power on. 5 4 12 cm (5") 2 Press the CD button. 3 Press the 7 OPEN/CLOSE button to open the disc tray. 8 cm (3") 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray. ● Be sure to place 8 cm (3") CD(s) in the middle of the disc trays. Caution: CD PLAY 3,6 5 1 - 3 Do not stack CDs in the tray. This can damage the player and the CDs. 5 When
ملخص المحتوى في الصفحة رقم 13
(Continued) ■ When choosing a CD for playback Press one of the CD PLAY 1 0 - 3 0 buttons to select the CD CD PLAY 1 - 3 you want to listen to. ● Only the selected disc will be played back. CD PLAY When selecting When selecting When selecting 1 - 3 disc 3 disc 1 disc 2 Notes: ● If the disc tray is open, it will be automatically closed. ● If the 0 6 button is pressed, continuous playback will begin from the first track of the disc you have selected. To interrupt playback: Press the 0
ملخص المحتوى في الصفحة رقم 14
MINIDISC OPERATION ■ Loading and playing MiniDiscs MD PLAY MD MD MD PLAY RELEASE EJECT 1 - 3 1 - 3 1 Press the ON/STAND-BY button to turn the power on. 2 Press the MD button. 3 Load the MiniDisc(s) in the direction indicated by the arrow 1 on the MiniDisc, with the labeled side facing up. 4 2 ● The MiniDisc loaded first is moved inside the main unit, and 2 the unit will select it as the MiniDisc to be played first. The total number of tracks and the total playing time on the Min
ملخص المحتوى في الصفحة رقم 15
HK (Continued) ■ When choosing a MD for playback Press one of the MD PLAY 1 0 - 3 0 buttons to select the MD 1 - 3 MD PLAY you want to listen to. ● Only the selected disc will be played back. When selecting When selecting When selecting MD PLAY disc 3 disc 1 disc 2 1 - 3 Note: ● If the 0 6 button is pressed, continuous playback will begin from the first track of the disc you have selected. To interrupt playback: Press the 0 6 button. To resume playback for just a single disc: Press
ملخص المحتوى في الصفحة رقم 16
RADIO OPERATION ■ Tuning (Main unit operation) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- 1 quency band. (FM ST, FM or AM) 4 4 Press the TUNING (X or W ) button to tune into the desired 2,3,5,6 station. Manual tuning: Press the TUNING ( X or W ) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station. Auto tuning: When the T
ملخص المحتوى في الصفحة رقم 17
(Continued) ■ Preset tuning You can store up to 40 stations in memory (40 stations consisting of any combination of AM and FM stations you like) and recall them. To enter stations into memory: Jog dial 1 Perform steps 1 - 6 in the "Tuning" section. MEMORY 2 Press the MEMORY button. ENTER TUNER 3 Within 30 seconds, turn the jog dial to make the preset chan- (BAND) nel number flash in the display. ● Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds
ملخص المحتوى في الصفحة رقم 18
RDS (Radio Data System) OPERATION RDS is a broadcasting service which a growing number of FM stations are now providing. It allows these FM stations to send additional signals along with their regular programme signals. For example, the stations send their station names, and information about what type of programme they broadcast, such as sports or music, etc. When tuned to an FM station which provide the RDS service, the RDS will appear, the station frequency (and then the station name
ملخص المحتوى في الصفحة رقم 19
(Continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) With the MD-C2H, you can search for and receive the following PTY, TP and TA signals. Stock Market reports, commerce, trading etc. Short accounts of facts, events and FINANCE: NEWS: publicly expressed views, reportage and actuality. For programmes targeted at a young audience, CHILDREN: primarily for entertainment and interest, rather Topical programme expanding or en- AFFAIRS
ملخص المحتوى في الصفحة رقم 20
HK (Continued) ■ ASPM (Auto Station Program Memory) (Main unit operation) It is recommended that you store stations in memory using ASPM. (This memory can be used for PTY searches, station select and EON switching.) 4 When the ASPM button is pressed, whilst tuned to the FM band, the RDS (Radio Data System) function will automatically search for new RDS stations. Up to 40 stations can be stored in memory. 1 (If you have already stored some stations in memory, the number of new stations yo
