ملخص المحتوى في الصفحة رقم 1
Project Array OM 1/10/06 12:21 PM Page 1
1000
880
800
1400
1000
800
1400
Project Arrray
Project Arrray
1000
880
800
Project Arrray
1400
Project Arrray
Project Arrray
1500 1500
Project Arrray
Project Arrray
Project Arrray
Project Arrray
Project Arrray
Project Arrray
1
Project Arrray
11500 500
Project Arrray
880
8
1400
8 880
1400
Project Arrray
P
Project Arrray
Project Arrray
1500 1500
Project Arrray
11500 500
Project Arrray
Project Arrray
®
™
JBL PROJECT ARRAY
1500 ARRAY, 1400 ARRAY,
1000 A
ملخص المحتوى في الصفحة رقم 2
Project Array OM 1/10/06 12:21 PM Page 2 READ FIRST! Important Safety Precautions! moving the cart/apparatus lines or circuits. When installing an CAUTION combination to avoid injury from outside antenna system, extreme RISK OF ELECTRIC SHOCK
tip-over. care should be taken to keep from DO NOT OPEN 13. Unplug this apparatus during touching such power lines or circuits, CAUTION: To reduce the risk of electric shock,
lightning storms or when unused for as contact with them might be fatal. do
ملخص المحتوى في الصفحة رقم 3
Project Array OM 1/10/06 12:21 PM Page 3 ® THANK YOU FOR CHOOSING JBL For more than 60 years, JBL enjoyment that you expect – posted on our latest advance- has been involved in every and that when you think about ments, and helps us to better aspect of music and film purchasing additional audio understand our customers and recording and reproduction, equipment for your home, car build products that meet their from live performances to the or office, you will once again needs and expectations.
ملخص المحتوى في الصفحة رقم 4
Project Array OM 1/10/06 12:21 PM Page 4 SPEAKER PLACEMENT IMPORTANT NOTE: The 800, However, spikes can damage between the spiked feet and 1000, 1400 and 1500 Array certain types of floors, such as the floor. models feature spiked feet for hardwood. In such instances, optimum acoustic performance. place included metal coasters 5.1-CHANNEL SYSTEM Center Channel Front Speakers Speaker Surround Speakers The front speakers should be they may be placed on a wall is placed in a corner along placed
ملخص المحتوى في الصفحة رقم 5
Project Array OM 1/10/06 12:21 PM Page 5 6.1-CHANNEL SYSTEM A 6.1-channel system will surrounds. The rear center consist of a 5.1-channel speaker should not call more configuration, as shown on attention to itself than the page 4, with the addition of a surround speakers. rear center speaker placed midway between the two surround speakers, and further to the rear than the 7.1-CHANNEL SYSTEM Some newer surround sound sides of the room, at or in formats utilize left and right front of the liste
ملخص المحتوى في الصفحة رقم 6
Project Array OM 1/10/06 12:21 PM Page 6 1400 ARRAY ASSEMBLY Due to the weight of the 5. Notice the two threaded 10. Once both bolts have been 1400 Array horn module, it inserts on the angled face started, work them in all of is packed separately from of the top and also the small the way, but do not tighten the low-frequency enclosure. L-bracket on the top. These them securely just yet. It is a very simple procedure are the attachment points 11. Install the remaining short to install the mod
ملخص المحتوى في الصفحة رقم 7
Project Array OM 1/10/06 12:21 PM Page 7 Step 9 Step 7 Step 11 Step 8 7
ملخص المحتوى في الصفحة رقم 8
Project Array OM 1/10/06 12:21 PM Page 8 SPEAKER CONNECTIONS S Su ub bw wo oo of fe er r C Co on nt tr ro ol ls s a an nd d C Co on nn ne ec ct ti io on ns s ( (1 15 50 00 0 A Ar rr ra ay y O On nl ly y) ) ¡ Line-Level Input 2 ™ Line-Level Output 34 56 7 £ Power Indicator 0 ¢ Subwoofer Level (Volume) Control 1 ∞ Crossover Adjustment § Phase Switch ¶ LP/LFE Selector • On/Off Auto Switch ª Power Switch Connection: ® ® If you have a Dolby Digital or DTS receiver/processor with a low-frequency-
ملخص المحتوى في الصفحة رقم 9
Project Array OM 1/10/06 12:21 PM Page 9 1500 ARRAY OPERATION Power On plug connected to a “live” If your main speakers can receptacle? Has the Power comfortably reproduce some Plug your subwoofer’s AC cord Switch ª been pressed to low-frequency sounds, set this into a wall outlet. Do not use the “on” position? Once you control to a lower frequency the outlets on the back of the have confirmed that the sub- setting, between 50Hz and receiver. woofer is active, proceed by 100Hz. This will conc
ملخص المحتوى في الصفحة رقم 10
Project Array OM 1/10/06 12:21 PM Page 10 GENERAL CONNECTION INFORMATION Separate and strip the ends of a stripe or other demarcation. the speakers in your system the speaker wire (not supplied) It is important to connect both with the correct polarity as shown. Speakers and speakers identically: (+) on the remains equally important in electronics terminals have speaker to (+) on the amplifier order to preserve the proper corresponding (+) and (–) and (–) on the speaker to (–) ambience and di
ملخص المحتوى في الصفحة رقم 11
Project Array OM 1/10/06 12:21 PM Page 11 TROUBLESHOOTING If there is no sound If the system plays mode. If it is not, check to see from any of the at low volumes but whether your receiver/amplifier speakers: shuts off as volume has other surround modes you is increased: • Check that receiver/amplifier may use. • Check all wires and con- is on and a source is playing. • In Dolby Digital or DTS modes, nections between receiver/ • Check all wires and con- make sure your receiver/ amplifier and
ملخص المحتوى في الصفحة رقم 12
Project Array OM 1/10/06 12:21 PM Page 8 SPECIFICATIONS 1400 ARRAY 1000 ARRAY 800 ARRAY 880 ARRAY 1500 ARRAY 3-Way, 14" (350mm) 3-Way, 10" (250mm) 3-Way, 8" (200mm) 3-Way, Dual 8" 15" (380mm)1000-Watt Floorstanding Floorstanding Bookshelf (200mm) Center Front-Firing Sub Ultrahigh-Frequency 045Ti: 1" Pure-titanium 045Ti: 1" Pure-titanium 045Ti: 1" Pure-titanium 045Ti: 1" Pure-titanium N/A Transducer compression driver compression driver compression driver compression driver with aluminum w
