Phoenix Gold In-Celing LCR Cinema دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Innovative Home Audio
ATCLCR6
In-Ceiling LCR Cinema Speaker
Congratulations on your purchase of the Phoenix Gold Additionally, you should allow an extra inch in all directions
Innovative Home Audio ATCLCR6 In-Ceiling LCR Cinema behind the ceiling surface to allow room for the doglegs that
Speaker. This product is designed to reproduce the audio retain the frame to the ceiling surface to swing into position.
portion of your home entertainment system with accuracy
and detail that will satisfy t

ملخص المحتوى في الصفحة رقم 2

Installing the ATCLCR6 Figure 4 It is now time to connect the speaker wire to the ATCLCR6. Your speaker wire is usually coded to maintain proper system phasing. This can be by color coding, or one conductor may have a printed marking or a rib along one edge that will not be found on the other. Identify which type of polarity coding that your wire is using. You must carefully observe that the positive terminal of the speaker output on your amplifi er is connected to the positive terminal of

ملخص المحتوى في الصفحة رقم 3

easily done by rotating the speaker until the optimum angle is achieved- typically a direct line of sight with the listener (Fig. 8). Next, one at a time, turn each of the four screws (Fig. 9) that operate the doglegs counter clockwise a few turns until you feel the dogleg is loose from its resting position. Now turn the screw clockwise until you feel the dogleg contact the ceiling surface. Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and

ملخص المحتوى في الصفحة رقم 4

ATCLCR6 Specifi cations Speaker 6.5” Textured Poly Cone w/Butyl Surround Tweeter 1” Parachute Silk Dome Frequency Response 55 Hz to 18 kHz Impedance 8 Ohm Sensitivity 92dB@2.83V Recommended Amp Power 25 to 150 Watts Continuous Outer Dimension 9 3/8” (237mm) Mounting Depth 5” (127mm) Cut Out Diameter 8 1/8” (206mm) Two Year Limited Warranty Phoenix Gold Innovative Home Audio, warrants this product against defects in materials and workmanship for a limited period of time. For a period of two (2