Pelco CM1750S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CA1750 Mount Adapter
Installation Instructions
C209M (4/98)
®
1.0 DESCRIPTION The CA1750 Mount Adapter is used when installing a bottom-mount camera on a
BS1750, CM1750, CM1750S, or TB1750 mount only when the mount is attached to
a ceiling. Use of the adapter, in this situation, will allow the camera to be mounted in
its correct orientation, rather than being inverted.
2.0 INSTALLATION To install the adapter (refer to Figure 1):
1. Place the camera inside the adapter and align the camera mount

ملخص المحتوى في الصفحة رقم 2

3.0 WARRANTY AND RETURN INFORMATION 3.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Excep- tions to this warranty are as noted below: • Three years on Genex™ Series multiplexers. • Two years on all standard motorized and fixed focal length lenses. ® ® • Two years on Legacy , Intercept , PV1000 Series, CM6700/CM8500/CM9500/ ™ CM9750/CM9760 Ma